AP Chemistry · Unit 1: Atomic Structure and Properties

1.4 Composition of Mixtures

Essential Question

How can we tell how pure a sample is?

Real samples are often mixtures. By the end of this lesson, you should be able to use elemental analysis data to find the purity of a sample and to tell whether a sample is a mixture.

Video not loading? Watch it on YouTube.

Pure Substance vs. Mixture

  • Pure substance: one type of particle
  • Mixture: two or more types
  • In a mixture, the amounts can vary.
Left box: all blue particles, labeled pure substance. Right box: blue and orange particles mixed, labeled mixture.

Mixtures Can Vary

  • A compound has a fixed composition.
  • A mixture does not.
Three mixtures of salt (blue) and sugar (orange) in different amounts. Mixture A is mostly sugar, mixture B is half and half, and mixture C is mostly salt.

These are all mixtures of salt (blue) and sugar (orange). Mixture A is mostly sugar, mixture B is half and half, and mixture C is mostly salt. Water is always H2O, but a mixture can have any ratio of its parts.

Elemental Analysis

  • Measures the mass of each element in a sample
  • Compare to what a pure compound should be
  • Tells us the composition and the purity
Flow chart: sample, then analysis, then results given as percent C, percent H, percent N, and so on.

Results come back as mass percents. If they match the pure compound’s percent composition, the sample is probably pure. If they don’t, something else is mixed in.

Finding Percent Purity

% purity = (mass of pure compound ÷ mass of sample) × 100

  • Assume the impurity has none of the element you measured.
  • Use the element’s mass to find the compound’s mass.

All of the measured element came from the compound, so the compound’s percent composition tells you how much compound was there. Purity can never be more than 100%, so a bigger answer means something went wrong.

Comparing Mass Percents

  • A mixture’s mass percent is between its parts’ values.
Number line of percent chlorine by mass from 40% to 70%. KCl is marked at 47.6% and NaCl at 60.7%. The region between them is highlighted: mixtures land here.

Pure KCl is always 47.6% chlorine by mass, and pure NaCl is always 60.7% chlorine. Any mixture of the two has to land in between. More NaCl pushes the value toward 60.7%, and more KCl pushes it toward 47.6%.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Purity of a Sample

A 2.00 g sample of impure NaCl contains 1.10 g of chlorine. The impurity contains no chlorine. What is the percent by mass of NaCl in the sample?

Show the solution
  1. Molar mass of NaCl: 22.99 + 35.45 = 58.44 g/mol
  2. % Cl in pure NaCl: 35.45 ÷ 58.44 × 100 = 60.66%
  3. Mass of NaCl: all of the chlorine came from NaCl, so 1.10 g ÷ 0.6066 = 1.813 g NaCl
  4. Percent purity: 1.813 g ÷ 2.00 g × 100
  5. Answer: 90.7% NaCl
  6. Check: less than 100%, which makes sense for an impure sample.

Example 2: Identifying a Mixture

A sample is either pure KCl or a mixture of KCl and NaCl. Analysis shows it is 52.0% chlorine by mass. Is the sample pure KCl? Justify your answer.

Show the solution
  1. Pure KCl: molar mass 39.10 + 35.45 = 74.55 g/mol, so 35.45 ÷ 74.55 × 100 = 47.6% Cl
  2. Compare: the sample is 52.0% Cl, which does not match 47.6%.
  3. Pure NaCl: 60.7% Cl. The sample falls between: 47.6% < 52.0% < 60.7%.
  4. Answer: No, it is a mixture of KCl and NaCl

Sample exam justification: Pure KCl is 47.6% chlorine by mass, but the sample is 52.0% chlorine. NaCl has a higher percent chlorine (60.7%), so NaCl in the sample raised the percent chlorine above the value for pure KCl.

Example 3: Mass of an Element in a Mixture

A 5.00 g mixture is 40.0% CaCO3 by mass. The rest is sand, SiO2. What mass of calcium is in the mixture?

Show the solution
  1. Mass of CaCO3: 0.400 × 5.00 g = 2.00 g. The sand has no calcium.
  2. Molar mass of CaCO3: 40.08 + 12.01 + 3(16.00) = 100.09 g/mol
  3. % Ca in CaCO3: 40.08 ÷ 100.09 × 100 = 40.04%
  4. Mass of Ca: 2.00 g × 0.4004 = 0.801 g
  5. Answer: 0.801 g Ca

Example 4: Particle Diagram

The diagram shows a mixture of helium and argon atoms. Which gas is present in the greater amount in moles? Which gas makes up the greater mass?

A box with six small teal helium atoms and two large purple argon atoms.
Show the solution
  1. Count: 6 helium atoms and 2 argon atoms
  2. Moles: moles count particles, so helium has more moles (3 times as many).
  3. Mass of He: 6 × 4.00 amu = 24.0 amu
  4. Mass of Ar: 2 × 39.95 amu = 79.9 amu
  5. Answer: He has more moles, and Ar has more mass
  6. The trap: more particles does not always mean more mass. Each argon atom is about 10 times heavier than a helium atom.

↑ Back to top


Practice

Practice with instant feedback

Answer original AP-style questions for Unit 1 and see an explanation right after each one. Choose Topic 1.4 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Pure substance: one type of particle
  • Mixtures can have any ratio of parts.
  • Elemental analysis reveals purity.
  • A mixture’s % falls between its parts.

Back to the essential question: we can tell how pure a sample is by measuring the elements in it and comparing the results to the pure compound. Next up, Topic 1.5 looks inside the atom at how electrons are arranged.

↑ Back to top


AP Alignment

This lesson covers Topic 1.4, Composition of Mixtures, in Unit 1 (Atomic Structure and Properties) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 1.4.A: Explain the quantitative relationship between the elemental composition by mass and the composition of substances in a mixture.

Essential knowledge: 1.4.A.1, 1.4.A.2

Suggested skill: 5.A Mathematical Routines. Identify quantities needed to solve a problem from given information (e.g., text, mathematical expressions, graphs, or tables).

↑ Back to top