AP Chemistry · Unit 1: Atomic Structure and Properties

1.6 Photoelectron Spectroscopy

Essential Question

How can we measure the energy of each electron in an atom?

We can’t see electrons, but photoelectron spectroscopy (PES) gives real data that backs up electron configurations. By the end of this lesson, you should be able to read a PES spectrum and connect it to an atom’s configuration.

Video not loading? Watch it on YouTube.

What Is PES?

  • High-energy light knocks electrons out of atoms.
  • We measure the energy needed to remove each electron.
  • This is called binding energy.
A wavy arrow of light (a photon) hits an atom with a 10+ nucleus, and an electron flies out of the atom.

Electrons held tightly have a high binding energy, and electrons held loosely have a low binding energy.

Reading a PES Spectrum

  • Position: energy to remove the electron
  • Height: number of electrons
  • Higher energy is on the LEFT.
PES spectrum of neon with binding energy decreasing to the right and a break in the axis: a small peak near 84 MJ/mol, a small peak near 4.7 MJ/mol, and a peak three times taller near 2.1 MJ/mol.

On most AP graphs, binding energy increases to the left, which is backwards from most graphs you’ve seen. The break marks on the x-axis mean part of the axis was skipped so all the peaks fit on one graph.

Matching Peaks to Subshells

  • Each peak is one subshell.
  • Read from the left: 1s, 2s, 2p, 3s …
  • Heights match the superscripts.
PES spectrum of neon with the peaks labeled 1s (near 84 MJ/mol), 2s (near 4.7 MJ/mol), and 2p (near 2.1 MJ/mol, three times taller).

Neon is 1s2 2s2 2p6. The 1s and 2s peaks are the same height because each holds 2 electrons, and the 2p peak is three times taller because it holds 6.

Core vs. Valence Peaks

  • Core electrons: close to the nucleus, high binding energy
  • Valence electrons: far away, low binding energy
PES spectrum of sodium with peaks labeled 1s (near 104 MJ/mol), 2s (near 6.8), 2p (near 3.7, the tallest), and a small 3s peak near 0.5 MJ/mol.

Sodium’s 1s electrons need over 100 MJ/mol to remove because they sit right next to the nucleus. Its 3s valence electron needs only about 0.5 MJ/mol because it is far away and shielded by 10 core electrons.

PES and Coulomb’s Law

  • More protons → stronger pull on 1s electrons
  • So the 1s peak moves to a higher energy.
Bar graph of 1s binding energy in MJ/mol: Li 6.26, Be 11.5, B 19.3, C 28.6, N 39.6, O 52.6, F 67.2, Ne 84.

Every bar is a 1s electron, so the distance is about the same. What changes is the number of protons, from 3 in lithium to 10 in neon. More protons means a stronger pull, so the 1s peak moves farther left across the period.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Identify the Element

The PES spectrum of an element is shown. Identify the element and write its electron configuration.

PES spectrum of an unknown element with five peaks: near 208 MJ/mol (height 2), 18.7 (height 2), 13.5 (height 6), 1.95 (height 2), and 1.06 (height 3).
Show the solution
  1. Label the peaks: from left to right: 1s, 2s, 2p, 3s, 3p
  2. Read the heights: 1s, 2s, and 3s are equal (2 electrons each). 2p is three times that (6). 3p is one and a half times (3).
  3. Add: 2 + 2 + 6 + 2 + 3 = 15 electrons
  4. Answer: phosphorus, P: 1s2 2s2 2p6 3s2 3p3

Example 2: Comparing Elements

The 1s peak for oxygen is at 52.6 MJ/mol. Would the 1s peak for fluorine be at a higher or lower energy? Explain.

Show the solution
  1. Protons: O has 8 protons and F has 9.
  2. Distance: both are 1s electrons, at about the same distance from the nucleus.
  3. Coulomb’s law: a larger nuclear charge pulls harder on the 1s electrons.
  4. Answer: higher binding energy for F (the actual value is about 67.2 MJ/mol)

Example 3: Predicting a Spectrum

Predict the PES spectrum of magnesium. How many peaks will it have? Which peak will be the tallest? Which will have the lowest binding energy?

Show the solution
  1. Configuration: Mg has 12 electrons: 1s2 2s2 2p6 3s2
  2. Number of peaks: 4 subshells, so 4 peaks
  3. Tallest: 2p, with 6 electrons
  4. Lowest binding energy: 3s, farthest from the nucleus and most shielded, so it is the peak farthest right
  5. Answer: 4 peaks with heights 2, 2, 6, 2; 2p is tallest; 3s has the lowest binding energy

Example 4: Evaluating a Claim

A student claims the 2s and 2p electrons in neon have the same energy. Does the PES spectrum of neon support this claim? Explain.

PES spectrum of neon with binding energy decreasing to the right and a break in the axis: a small peak near 84 MJ/mol, a small peak near 4.7 MJ/mol, and a peak three times taller near 2.1 MJ/mol.
Show the solution
  1. Find the peaks: 2s is near 4.7 MJ/mol and 2p is near 2.1 MJ/mol.
  2. Compare: they are two separate peaks at different positions, so they have different energies.
  3. Answer: No, the spectrum does not support the claim

Sample exam justification: If the 2s and 2p electrons had the same energy, they would make a single peak. The spectrum shows two peaks, and the 2s peak is at a higher binding energy than the 2p peak, so subshells in the same shell have different energies.

↑ Back to top


Practice

Practice with instant feedback

Answer original AP-style questions for Unit 1 and see an explanation right after each one. Choose Topic 1.6 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • PES measures the energy to remove electrons.
  • Position = energy, height = number of electrons
  • Core electrons have the highest energies.
  • More protons → peaks shift to higher energy

Back to the essential question: PES measures the energy needed to remove electrons from each subshell, and the peaks match electron configurations. Next up, Topic 1.7 uses these same ideas to explain periodic trends.

↑ Back to top


AP Alignment

This lesson covers Topic 1.6, Photoelectron Spectroscopy, in Unit 1 (Atomic Structure and Properties) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 1.6.A: Explain the relationship between the photoelectron spectrum of an atom or ion and: i. The ground-state electron configuration of the species. ii. The interactions between the electrons and the nucleus.

Essential knowledge: 1.6.A.1

Suggested skill: 4.B Model Analysis. Explain whether a model is consistent with chemical theories.

↑ Back to top