Chemistry · Ionic Bonding

Ternary Compounds

Essential Question

How do we name and write compounds with polyatomic ions?

Chalk, baking soda, and farm fertilizer all contain polyatomic ions, so you’ll see these names everywhere. In the last topic, you named binary ionic compounds. By the end of this lesson, you should be able to name compounds with polyatomic ions and write their formulas.

Video not loading? Watch it on YouTube.

What Is a Ternary Compound?

  • Ternary = made of three elements.
  • It usually contains a polyatomic ion.
  • The same rules work for any compound with a polyatomic ion.
A sodium tile (group 1) plus the nitrate ion NO3- combine to make NaNO3, sodium nitrate.

Sodium nitrate, NaNO3, has three elements: sodium, nitrogen, and oxygen. The sodium ion is a single atom, but the nitrate ion is nitrogen and oxygen bonded together. This lesson uses metals from groups 1, 2, and 13 plus ammonium; transition metals come in the next topic.

Polyatomic Ions

  • Polyatomic ion = a group of bonded atoms with one charge.
  • The charge belongs to the whole ion.
  • It stays together as one unit.
A sulfate ion drawn as one sulfur atom bonded to four oxygen atoms, inside brackets with a 2- charge outside. Caption: sulfate, SO4 2-, 5 atoms, one 2- charge.

Sulfate, SO42−, is one sulfur atom and four oxygen atoms. The 2− charge doesn’t belong to any single atom, so it’s written outside the brackets. In a compound, a polyatomic ion always stays together.

Common Polyatomic Ions

  • Use your polyatomic ion chart.
  • Ammonium is the only common positive polyatomic ion.
  • Use the ion’s name exactly as written.
Table of polyatomic ions: ammonium NH4+, hydroxide OH-, nitrate NO3-, nitrite NO2-, acetate C2H3O2-, carbonate CO3 2-, sulfate SO4 2-, sulfite SO3 2-, phosphate PO4 3-.

Most polyatomic ions are negative and end in “ate” or “ite.” Hydroxide is an exception that ends in “ide.” Ammonium, NH4+, is positive, so it acts like a metal cation.

-ate vs. -ite

  • -ate: one more oxygen
  • -ite: one less oxygen
  • The charge stays the same.
Nitrate NO3- loses one oxygen to become nitrite NO2-. Sulfate SO4 2- loses one oxygen to become sulfite SO3 2-.

Nitrate is NO3− and nitrite is NO2−. Sulfate is SO42− and sulfite is SO32−. One letter in the name changes the formula, so read carefully.

Naming Ternary Compounds

  1. Name the cation.
  2. Name the polyatomic ion exactly as it is. Don’t add “ide.”
CaCO3 splits into calcium and carbonate, which combine into the name calcium carbonate.

CaCO3 is calcium carbonate, the compound in chalk and seashells. “Calcium carbonide” would be wrong, because polyatomic ions keep their own names.

Ammonium Compounds

  • Ammonium is the positive ion (cation).
  • It is written first, like a metal.
  • Single-atom anions still end in “ide.”
Ammonium NH4+ plus chloride Cl- gives NH4Cl, ammonium chloride.

NH4Cl is ammonium chloride. Chloride gets the “ide” ending because chlorine is a single atom, not a polyatomic ion.

Parentheses for Polyatomic Ions

  • More than one polyatomic ion → use parentheses.
  • The subscript goes outside the parentheses.
Ca 2+ with two OH- ions: (+2) + 2(-1) = 0. Ca(OH)2 is correct; CaOH2 is crossed out in red.

Calcium hydroxide needs two OH− ions to cancel Ca2+, so it’s Ca(OH)2. Without parentheses, CaOH2 would mean one oxygen and two hydrogens, which is a different thing entirely.

Criss-Cross with Polyatomic Ions

  • Criss-cross the charges, just like binary compounds.
  • Keep the polyatomic ion together.
  • Check: total charge = 0.
Al 3+ and SO4 2-. Arrows carry the 3 to become the subscript on (SO4) and the 2 to become aluminum's subscript, giving Al2(SO4)3, aluminum sulfate.

Al3+ and SO42− criss-cross to Al2(SO4)3, aluminum sulfate. Check: 2(+3) + 3(−2) = 6 − 6 = 0.

Reduce, but Don’t Change the Ion

  • Reduce only the subscripts outside the ion.
  • Never change the subscripts inside the ion.
  • Only one polyatomic ion → no parentheses.
Mg 2+ and SO4 2- criss-cross to Mg2(SO4)2, which is crossed out, then divided by 2 to give MgSO4.

Mg2+ and SO42− criss-cross to Mg2(SO4)2, which reduces to MgSO4. The 4 inside sulfate never changes, because it’s part of the ion’s identity.

Steps: Name to Formula

  1. Write the ions and their charges.
  2. Criss-cross the charges (use parentheses for more than one polyatomic ion).
  3. Reduce the outside subscripts and drop any 1s.
  4. Check: total charge = 0.
Four steps with calcium nitrate: 1, write ions and charges, Ca 2+ NO3-. 2, criss-cross with parentheses, Ca1(NO3)2. 3, reduce and drop 1s, Ca(NO3)2. 4, check total = 0, (+2) + 2(-1) = 0.

For calcium nitrate: Ca2+ and NO3− criss-cross to Ca1(NO3)2. Drop the 1 to get Ca(NO3)2, and check: (+2) + 2(−1) = 0.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Naming a Ternary Compound

Name the compound Na2SO4.

Show the solution
  1. Split into ions: more than two elements, so look for a polyatomic ion. SO4 is on the chart, leaving Na.
  2. Name the cation: Na is sodium.
  3. Name the polyatomic ion: SO42− is sulfate. Don’t change it to sulfide, which is just S2−.
  4. Answer: sodium sulfate. The subscript 2 doesn’t change the name.

Example 2: Naming with Ammonium

Name the compound (NH4)2S.

Show the solution
  1. Split into ions: (NH4)2 is the polyatomic ion, and S is by itself.
  2. Name the cation: NH4+ is ammonium.
  3. Name the anion: S is a single atom, so it gets “ide”: sulfur → sulfide.
  4. Answer: ammonium sulfide. Check: 2(+1) + (−2) = 0.

Example 3: Writing a Formula

Write the formula for magnesium hydroxide.

Show the solution
  1. Ions and charges: magnesium (group 2) is Mg2+; hydroxide is OH−.
  2. Criss-cross: Mg1(OH)2, with parentheses because there are two hydroxide ions.
  3. Reduce: 1 and 2 can’t be reduced; drop the 1 → Mg(OH)2
  4. Check: (+2) + 2(−1) = 0
  5. Answer: Mg(OH)2. MgOH2 without parentheses would be wrong.

Example 4: Equal Charges

Write the formula for aluminum phosphate.

Show the solution
  1. Ions and charges: aluminum (group 13) is Al3+; phosphate is PO43−.
  2. Criss-cross: Al3(PO4)3
  3. Reduce: divide the outside subscripts by 3 → AlPO4. Don’t touch the 4 inside phosphate, and drop the parentheses since there’s only one phosphate.
  4. Check: (+3) + (−3) = 0
  5. Answer: AlPO4

↑ Back to top


Practice

Name compounds with polyatomic ions and write their formulas, then find the mistakes. Have your polyatomic ion chart ready. Try all 16 on your own first, then check your work with the answer key.

Learn Your Ions with the Polyatomic Ion Trainer

Take a five-minute challenge on the names, formulas, and charges of 23 common polyatomic ions. Any ion you miss comes back later so you can try it again.

Practice with the Ionic Reaction Builder

Practice writing formulas with polyatomic ions as reaction products. Keep each polyatomic ion intact and set the subscripts so the charges add to 0.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • A polyatomic ion is a group of atoms with one charge.
  • Name: cation + polyatomic ion name.
  • More than one polyatomic ion → parentheses.
  • Never change the subscripts inside the ion.

Back to the essential question: treat each polyatomic ion as one unit with its own name and charge, and use the same charge-balancing rules as binary compounds. Next up, we’ll name compounds with transition metals, which can form more than one charge.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-1: Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
  • HS-PS1-2: Construct and revise an explanation for the outcome of a simple chemical reaction based on the outermost electron states of atoms, trends in the periodic table, and knowledge of the patterns of chemical properties.

Disciplinary core ideas: PS1.A Structure and Properties of Matter

↑ Back to top