Chemistry · Ionic Bonding

Properties of Ionic Compounds

Essential Question

What gives ionic compounds their properties?

Think about table salt. It’s hard, it’s tough to melt, and it dissolves in water. In the last topic, you used Lewis structures to show how metals transfer electrons to nonmetals to make ions. By the end of this lesson, you should be able to explain each property of an ionic compound using the ions inside it.

Video not loading? Watch it on YouTube.

The Crystal Lattice

  • Cations (+) and anions (−) stack in a repeating 3-D pattern.
  • Each ion is surrounded by opposite charges.
  • Strong attractions run in every direction.
A sodium chloride crystal lattice: small purple positive sodium ions and larger green negative chloride ions alternating in a grid, so every ion is surrounded by ions of the opposite charge.

In sodium chloride, the small sodium ions (Na+) and larger chloride ions (Cl−) alternate. Every ion touching a sodium ion is a chloride ion, and every ion touching a chloride ion is a sodium ion. In the real 3-D crystal, each ion has six neighbors with the opposite charge. These strong attractions are the key to every property in this lesson.

High Melting Points

  • To melt, ions must break free from the lattice.
  • Many strong attractions → lots of energy needed
  • Ionic compounds are solids at room temperature.
Bar graph of melting points: ice 0 degrees C, sugar 186 degrees C, table salt (NaCl) 801 degrees C.

Ice melts at 0 °C and sugar at about 186 °C, but table salt doesn’t melt until 801 °C, far hotter than a kitchen oven. Ice and sugar are not ionic compounds. In salt, every ion is attracted to all of the ions around it, and breaking enough of those strong attractions to let the ions move takes a lot of energy.

Bigger Charges, Higher Melting Point

  • Larger ion charges → stronger attraction
  • Stronger attraction → higher melting point
NaCl: Na+ and Cl- joined by a thin double arrow, melts at 801 degrees C. MgO: Mg 2+ and O 2- joined by a thick red double arrow, melts at 2852 degrees C.

Sodium chloride is made of ions with charges of +1 and −1. Magnesium oxide is made of ions with charges of +2 and −2. By Coulomb’s law, more charge means a stronger attraction, so MgO melts at 2852 °C, more than 2000 degrees higher than NaCl. Smaller ions can also get closer together, which strengthens the attraction, but when you compare two ionic compounds, check the charges first.

Hard but Brittle

  • Hard: strong attractions hold ions in place.
  • A sharp hit can shift a layer of ions.
  • Like charges line up and repel → the crystal shatters.
Before: two layers of alternating positive and negative ions, with an arrow showing a hit on the top layer. After the top layer shifts by one ion, positive sits above positive and negative above negative, with red arrows showing the like charges repel.

Brittle means a solid shatters instead of bending. Before the hit, every ion sits next to opposite charges, so the layers attract. If a hit pushes one layer over by a single ion, positive lines up with positive and negative with negative. Like charges repel, the layers push apart, and the crystal cracks.

Conductivity: Solids

  • Current needs charged particles that can move.
  • In a solid, ions are locked in the lattice.
  • Solid ionic compounds do not conduct.
A solid ionic lattice between a positive and a negative electrode, wired to a battery and a gray, unlit bulb. Caption: solid, bulb stays off.

In a metal wire, electrons carry the current. In an ionic compound, the charged particles are the ions themselves. A solid is full of ions, but they can only vibrate in place. They can’t travel toward the electrodes, so no current flows and the bulb stays off.

Conductivity: Melted or Dissolved

  • Melted or dissolved: ions are free to move.
  • Moving ions carry the current.
Ions dissolved in water between two electrodes. Purple positive ions move toward the negative electrode and green negative ions move toward the positive electrode. The bulb is lit. Caption: dissolved, bulb lights up.

When the compound dissolves, the lattice breaks apart. Positive ions move toward the negative electrode, negative ions move toward the positive electrode, and the bulb lights up. A melted (molten) ionic compound conducts too, because its ions can slide past each other. The rule to remember: solid, no. Melted or dissolved, yes.

Dissolving in Water

  • Many ionic compounds dissolve in water.
  • Water pulls ions out of the lattice.
  • The ions separate (dissociate).
Equation NaCl(s) yields Na+(aq) + Cl-(aq). Below, a sodium ion surrounded by water molecules with their oxygen ends facing it, and a chloride ion surrounded by water molecules with their hydrogen ends facing it.

When sodium chloride dissolves, NaCl(s) → Na+(aq) + Cl−(aq). The “aq” means the ion is surrounded by water. Water molecules have a slightly negative oxygen end and slightly positive hydrogen ends, so oxygen ends face the sodium ion and hydrogen ends face the chloride ion. Not every ionic compound dissolves; later in this unit you’ll learn rules to predict which ones do.

Compare: Metallic Bonding

  • Metal cations sit in a sea of shared electrons.
  • The electrons move freely, so solid metals conduct.
  • Layers slide without breaking, so metals bend.

A chemical bond is a strong attraction that holds atoms or ions together, and ionic bonds are only one kind. Metal atoms hold each other with a metallic bond. Each metal atom lets go of its valence electrons, which spread out into a sea of electrons (some books say an ocean of electrons) shared by every cation in the lattice. The metallic bond is the attraction between the metal cations and these free-moving electrons. That one picture explains how metals behave. The moving electrons carry current, so a solid metal conducts. A hammer blow slides one layer of cations over the next, but the sea of electrons still surrounds every cation, so nothing repels and the metal bends instead of shattering (it is malleable). The free electrons also reflect light, which gives metals their shine, or luster. Compare an ionic solid like salt: its ions are locked in place, so it is brittle, it does not conduct as a solid, and it has no metallic shine.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Comparing Melting Points

Which compound has the higher melting point, NaF or CaO? Explain your answer.

Two boxes, NaF versus CaO.
Show the solution
  1. NaF charges: sodium (group 1) forms Na+ and fluorine (group 17) forms F−, so +1 and −1.
  2. CaO charges: calcium (group 2) forms Ca2+ and oxygen (group 16) forms O2−, so +2 and −2.
  3. Compare: bigger charges → stronger attraction
  4. Connect: stronger attraction → more energy to melt
  5. Answer: CaO has the higher melting point. Its ions have charges of 2+ and 2−, while NaF’s ions are only 1+ and 1−, and larger charges make stronger attractions that take more energy to break. (Real data: NaF melts at 993 °C, CaO at 2613 °C.)

Example 2: Identify the Solid

An unknown white solid was tested in lab. Is it an ionic compound? Use the data as evidence.

Data table for an unknown solid: melting point 770 degrees C; conducts as a solid, no; conducts when dissolved in water, yes.
Show the solution
  1. Melting point: 770 °C is very high → strong attractions between ions in a lattice.
  2. Solid doesn’t conduct: the ions are locked in place.
  3. Dissolved conducts: the compound separated into ions that can move.
  4. Answer: Yes, it’s ionic. Its high melting point shows strong attractions between its particles, and it conducts when dissolved but not as a solid, which shows it contains ions that can only move once the lattice breaks apart. (Potassium chloride melts at 770 °C, so it could be KCl.)

Example 3: Which Samples Conduct?

Which samples of KBr conduct electricity? Explain your answer.

Three samples of KBr. A: solid KBr with ions in an ordered lattice. B: melted KBr with ions scattered. C: KBr in water with ions scattered in blue water.
Show the solution
  1. Rule: an ionic compound conducts only if its ions can move.
  2. A (solid): ions locked in the lattice → no
  3. B (melted): KBr melts at 734 °C, and in the liquid the ions can move → yes
  4. C (in water): water separates K+ and Br−, which move freely → yes
  5. Answer: B and C conduct.
  6. The trap: the solid does contain ions, but they can’t move, so no current flows.

Example 4: Explaining Brittleness

A student hits a crystal of table salt with a hammer, and it shatters into pieces. Explain why, using the arrangement of ions.

A hammer about to strike a NaCl crystal drawn as a lattice of alternating positive and negative ions.
Show the solution
  1. Start with the lattice: every ion sits next to opposite charges, so the layers attract.
  2. The hit: one layer of ions shifts over slightly.
  3. After the shift: + lines up with + and − lines up with −. Like charges repel.
  4. Answer: Like charges repel → layers push apart → the crystal shatters. When the hammer hits, a layer of ions shifts, ions with the same charge end up next to each other, and their repulsion pushes the layers apart.

↑ Back to top


Practice

Compare melting points, predict which samples conduct, and explain the properties of ionic compounds. Try it on your own first, then check your work with the answer key.

Try the virtual lab

Test four unknown solids for luster, conductivity, melting, solubility in water and cyclohexane, and malleability, then use your evidence to classify each one as ionic, polar covalent, nonpolar covalent or metallic.

Lab worksheet: PDF | Answer key: PDF

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Strong attractions hold ions in a lattice.
  • High melting points (higher with bigger charges).
  • Hard but brittle.
  • Conduct only when melted or dissolved.

Back to the essential question: ionic compounds get their properties from strong attractions between oppositely charged ions locked in a lattice. Those attractions explain the high melting points and hardness, the arrangement of charges explains why crystals shatter, and whether the ions can move explains conductivity. Next up, we’ll learn how to name binary ionic compounds and write their formulas.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-3: Plan and conduct an investigation to gather evidence to compare the structure of substances at the bulk scale to infer the strength of electrical forces between particles.
  • HS-PS2-6: Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.

Disciplinary core ideas: PS1.A Structure and Properties of Matter; PS2.B Types of Interactions

↑ Back to top