AP Chemistry · Unit 4: Chemical Reactions

4.6 Introduction to Titration

Essential Question

How can we find an unknown concentration?

Suppose you have a bottle of acid, but the label is missing. You can’t see molecules, but you can measure volumes very precisely. By the end of this lesson, you should be able to use a titration to find out how much acid is in that bottle.

Video not loading? Watch it on YouTube.

What Is a Titration?

  • A titration finds the amount of an unknown.
  • A known solution is added from a buret.
  • Stop when the reaction is complete.
A buret clamped to a ring stand above an Erlenmeyer flask. The buret holds the titrant of known concentration; the flask holds the analyte of unknown amount.

The solution being tested goes in the flask. It is called the analyte, and its amount is unknown. The buret holds the titrant, a solution with a known concentration that reacts with the analyte. Add the titrant slowly, stop exactly when the analyte has completely reacted, and read the volume used from the buret.

Equivalence Point and Endpoint

  • Equivalence point: the analyte is all used up.
  • Endpoint: the indicator changes color.
  • A good indicator has its endpoint ≈ the equivalence point.
Two Erlenmeyer flasks: before, the solution is colorless; at the endpoint, it is pink.

The equivalence point is the moment we are trying to find, but we can’t see it directly. So we add an indicator, a dye that changes color, like this flask turning pink. The color change tells us when to stop.

Moles at the Equivalence Point

  • Titrant moles react exactly with analyte moles.
  • Use the mole ratio from the balanced equation.

HCl + NaOH → NaCl + H2O

For HCl and NaOH the ratio is 1 : 1, so at the equivalence point, mol HCl = mol NaOH. Moles come from solution data: mol = M × V, with V in liters (mL ÷ 1000 = L). If the ratio isn’t 1 : 1, as with sulfuric acid, use the mole ratio from the equation just like any stoichiometry problem.

Titration Curve

  • pH rises slowly, then jumps.
  • The equivalence point is the middle of the jump.
  • Strong acid + strong base: pH 7 at equivalence.
Titration curve of pH versus volume of NaOH added from 0 to 50 mL. The pH rises slowly from about 1, jumps steeply near 25 mL, and levels off near 13. The equivalence point is marked at 25 mL and pH 7.

This curve shows a strong acid (HCl) titrated with a strong base (NaOH). At first the flask is full of acid, so the pH is low and rises slowly. Near the equivalence point, a single drop of base can change the pH by several units. For a strong acid with a strong base, the equivalence point is at pH 7, because the solution contains only water and a neutral salt. Read straight down from the middle of the jump to find the volume: here, 25.0 mL.

Particles During a Titration

  • H+ + OH− → H2O as NaOH is added.
Four boxes. Start: H+ and Cl- ions. Halfway: fewer H+, with Cl- and Na+. Equivalence: only Na+ and Cl-. Past equivalence: Na+, Cl-, and extra OH-.
StageWhat is in the flask
StartLots of H+ and Cl− from the acid
HalfwayHalf the H+ has reacted with OH− to make water; Na+ has been added; Cl− is a spectator
EquivalenceNo H+ and no OH−: only Na+, Cl−, and water, so pH 7
Past equivalenceNo acid left to react, so extra OH− builds up and the pH climbs high

Water molecules aren’t drawn, to keep the picture simple.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Finding Molarity

A 25.00 mL sample of HCl is titrated with 0.100 M NaOH. The equivalence point is reached after 18.40 mL of NaOH. What is the concentration of the HCl?

Show the solution
  1. Balanced equation: HCl + NaOH → NaCl + H2O, a 1 : 1 ratio.
  2. Moles of titrant: 18.40 mL ÷ 1000 = 0.01840 L. mol NaOH = (0.100 mol/L)(0.01840 L) = 0.001840 mol
  3. Mole ratio: 1 : 1, so mol HCl = 0.001840 mol
  4. Molarity of the analyte: [HCl] = 0.001840 mol ÷ 0.02500 L
  5. Answer: [HCl] = 0.0736 M (three sig figs, limited by 0.100 M)

Example 2: A 1 : 2 Mole Ratio

A 20.00 mL sample of H2SO4 requires 32.50 mL of 0.150 M NaOH to reach the equivalence point. Find the concentration of the H2SO4. H2SO4 + 2NaOH → Na2SO4 + 2H2O

Show the solution
  1. Mole ratio: sulfuric acid has two acidic hydrogens, so 1 mol H2SO4 : 2 mol NaOH.
  2. Moles of titrant: 32.50 mL = 0.03250 L. mol NaOH = (0.150 mol/L)(0.03250 L) = 0.004875 mol
  3. Use the ratio: 0.004875 mol NaOH × (1 mol H2SO4 / 2 mol NaOH) = 0.002438 mol H2SO4
  4. Molarity: 0.002438 mol ÷ 0.02000 L = 0.1219 M
  5. Answer: [H2SO4] = 0.122 M. Forgetting the mole ratio gives 0.244 M, double the right answer.

Example 3: Reading a Titration Curve

A 10.00 mL sample of HCl is titrated with 0.200 M NaOH. Use the curve to find the equivalence point volume, then find the concentration of the HCl.

Titration curve of pH versus volume of NaOH added from 0 to 40 mL. The pH starts near 0.4, rises slowly, then jumps steeply at 20 mL and levels off.
Show the solution
  1. Find the equivalence point: the middle of the steep vertical jump.
  2. Read the volume: straight down to the x-axis, V(NaOH) = 20.0 mL = 0.0200 L
  3. Moles of NaOH: (0.200 mol/L)(0.0200 L) = 0.00400 mol
  4. Mole ratio: 1 : 1, so mol HCl = 0.00400 mol
  5. Answer: [HCl] = 0.00400 mol ÷ 0.01000 L = 0.400 M

↑ Back to top


Practice

Find the Equivalence Point

Titrate HCl with NaOH while the pH curve builds live, stop at the endpoint, and read the equivalence volume from your own curve to check how the moles of titrant and analyte match. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 4 and see an explanation right after each one. Choose Topic 4.6 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Titrant: known; analyte: unknown
  • Equivalence point: analyte used up
  • Endpoint: indicator changes color
  • Middle of the jump = equivalence

Back to the essential question: measure the volume of titrant needed to reach the equivalence point, find its moles, and use stoichiometry to get the moles and concentration of the analyte. Next up, Topic 4.7 sorts reactions into types.

↑ Back to top


AP Alignment

This lesson covers Topic 4.6, Introduction to Titration, in Unit 4 (Chemical Reactions) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 4.6.A: Identify the equivalence point in a titration based on the amounts of the titrant and analyte, assuming the titration reaction goes to completion.

Essential knowledge: 4.6.A.1

Suggested skill: 3.A Representing Data and Phenomena. Represent chemical phenomena using appropriate graphing techniques, including correct scale and units.

↑ Back to top