In this lesson
- Video lesson (coming soon)
- Lesson notes
- Worked examples
- Big ideas
- AP alignment
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Equilibrium Constant Lab (activity)
- AP Chemistry Unit 7 Practice (activity)
Essential Question
Why does a salt dissolve less when one of its ions is already in the water?
This lesson answers that two ways: with Le Châtelier’s principle, and with Ksp calculations.
Video lesson coming soon. In the meantime, read through the lesson below.
What Is a Common Ion?
- A common ion is an ion that is already in the solution and is also part of the salt you are dissolving.
- Example: dissolving AgCl in NaCl solution instead of pure water. NaCl already put Cl− in the water, and AgCl also makes Cl−. Chloride is the common ion.
Le Châtelier Explains It

- In AgCl(s) ⇌ Ag+(aq) + Cl−(aq), chloride is a product.
- Adding a common ion is like adding a product, so the equilibrium shifts left.
- More AgCl stays solid, so less salt dissolves.
Pure Water vs. Common Ion

- In pure water, AgCl dissolves to s = 1.3 × 10−5 M.
- In 0.10 M NaCl, s drops to 1.8 × 10−9 M.
- That is about 7,000 times less. The common-ion effect can be huge.
Setting Up the Math
Use an ICE table, but the common ion does not start at zero. For AgCl in 0.10 M NaCl:
| AgCl(s) | Ag+ | Cl− | |
|---|---|---|---|
| I | solid: ignore | 0 | 0.10 |
| C | +s | +s | |
| E | s | 0.10 + s ≈ 0.10 |
s is tiny compared to 0.10, so adding it barely changes 0.10. Using 0.10 + s ≈ 0.10 makes the math much easier.
Using the Common-Ion Effect in Lab
- Add a common ion → more precipitate forms. Chemists do this on purpose to get as much solid out of solution as possible.
- Rinse a precipitate with a dilute common-ion solution → less of it dissolves, so less product is lost.
- Rinse with pure water → more dissolves → lower yield. AP questions often ask how a procedure change like this affects results.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: AgCl in NaCl
Calculate the molar solubility of AgCl (Ksp = 1.8 × 10−10) in 0.10 M NaCl.
Show the solution
- Write the expression: Ksp = [Ag+][Cl−]
- Set up the table: I: [Ag+] = 0, [Cl−] = 0.10 (one Cl− per NaCl). C: +s, +s. E: s, 0.10 + s (see the table above).
- Substitute: 1.8 × 10−10 = (s)(0.10 + s)
- Simplify: s is tiny compared to 0.10, so 1.8 × 10−10 ≈ (s)(0.10)
- Solve: s = 1.8 × 10−10 / 0.10
- Answer: s = 1.8 × 10−9 M Compare 1.3 × 10−5 M in pure water: much smaller, just as Le Châtelier predicts.
Example 2: PbI2 in NaI
Calculate the molar solubility of PbI2 (Ksp = 9.8 × 10−9) in 0.050 M NaI.
Show the solution
| PbI2(s) | Pb2+ | 2I− | |
|---|---|---|---|
| I | solid: ignore | 0 | 0.050 |
| C | +s | +2s | |
| E | s | 0.050 + 2s |
- Write the expression: Ksp = [Pb2+][I−]2
- Set up the table: iodide is the common ion, starting at 0.050 M. Pb2+ goes up by s and I− by 2s.
- Substitute and simplify: 9.8 × 10−9 = (s)(0.050 + 2s)2 ≈ (s)(0.050)2
- Square: (0.050)2 = 0.0025, so 9.8 × 10−9 = (s)(0.0025). Do not forget to square it.
- Solve: s = 9.8 × 10−9 / 0.0025 = 3.92 × 10−6
- Answer: s = 3.9 × 10−6 M In pure water it was 1.3 × 10−3 M, so the common ion cut the solubility by more than 300 times.
Example 3: CaF2 in Ca(NO3)2
Calculate the molar solubility of CaF2 (Ksp = 3.7 × 10−11) in 0.020 M Ca(NO3)2.
Show the solution
| CaF2(s) | Ca2+ | 2F− | |
|---|---|---|---|
| I | solid: ignore | 0.020 | 0 |
| C | +s | +2s | |
| E | 0.020 + s | 2s |
- Identify the common ion: this time it is Ca2+. Each Ca(NO3)2 gives one Ca2+, so [Ca2+] starts at 0.020 M.
- Set up the table: F− starts at 0. Ca2+ goes up by s and F− by 2s.
- Substitute and simplify: 3.7 × 10−11 = (0.020 + s)(2s)2. Since s is tiny, 0.020 + s ≈ 0.020.
- Keep the 2s: F− started at zero, so 2s is not negligible. (0.020)(4s2) = 0.080s2
- Divide: s2 = 3.7 × 10−11 / 0.080 = 4.63 × 10−10 (keep an extra digit for now)
- Answer: s = √(4.63 × 10−10) = 2.2 × 10−5 M In pure water it was 2.1 × 10−4 M, so the solubility dropped about tenfold.
Example 4: Choosing a Rinse
A student collects solid PbCl2 on filter paper. To keep the most solid, should she rinse it with pure water or with dilute NaCl solution? Justify your answer.
Show the solution
- Write the equilibrium: PbCl2(s) ⇌ Pb2+(aq) + 2Cl−(aq)
- Find the common ion: NaCl solution contains Cl−, which is also made when PbCl2 dissolves.
- Apply Le Châtelier: extra Cl− shifts the equilibrium left, toward the solid, so less PbCl2 dissolves.
- Answer: Rinse with dilute NaCl. The common ion (Cl−) lowers the solubility of PbCl2, so less solid is lost. With pure water, more solid would dissolve and her measured mass would be too low.
Practice
Run the Equilibrium Constant Lab
The lab opens in Ksp and Common Ion mode with AgCl in 0.10 M NaCl. Compare its molar solubility with the value in pure water. No login needed.
Practice with instant feedback
Answer original AP-style questions for Unit 7 and see an explanation right after each one. Choose Topic 7.12 or mix topics. No login needed.
Lesson Slides
Big Ideas
- A common ion is already in solution and is also part of the salt.
- It shifts the dissolving equilibrium toward the solid.
- Solubility goes down.
- In the ICE table, start the common ion at its concentration, not zero.
Back to the essential question: the ion already in the water pushes the equilibrium back toward the solid, just as Le Châtelier’s principle predicts, so less salt dissolves. That wraps up Unit 7. Next up, Unit 8: Acids and Bases, where you will use everything you just learned about equilibrium.
AP Alignment
This lesson covers Topic 7.12, Common-Ion Effect, in Unit 7 (Equilibrium) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 7.12.A: Identify the solubility of a salt, and/or the value of Ksp for the salt, based on the concentration of a common ion already present in solution.
Essential knowledge: 7.12.A.1
Suggested skill: 2.F Question and Method. Explain how modifications to an experimental procedure will alter results.