AP Chemistry · Unit 7: Equilibrium

7.11 Introduction to Solubility Equilibria

In this lesson

Take it with you

Essential Question

How much of a salt can dissolve in water?

In Unit 4 we called some salts soluble and some insoluble. It is really a question of how much, and this lesson uses equilibrium to calculate it.

Video lesson coming soon. In the meantime, read through the lesson below.

Dissolving Is Reversible

A beaker with solid AgCl at the bottom and Ag+ and Cl− ions in the water. A blue arrow up is dissolving and a red arrow down is precipitating. Caption: AgCl(s) ⇌ Ag+(aq) + Cl−(aq).
  • A slightly soluble salt like AgCl dissolves a little: ions break off the solid (dissolving).
  • Ions can also bump into the solid and stick back on (precipitating).
  • When the dissolving rate equals the precipitating rate, the solution is saturated. That is a dynamic equilibrium: solid and ions are both present, and nothing changes overall.

The Solubility Product, Ksp

AgCl(s) ⇌ Ag+ + Cl−, Ksp = [Ag+][Cl−]. CaF2(s) ⇌ Ca2+ + 2F−, Ksp = [Ca2+][F−]².
  • Write the equation with the solid on the left and the ions on the right.
  • Ksp, the solubility product constant, is K for a salt dissolving.
  • Leave out the solid. Multiply the ion concentrations. Coefficients become exponents.
  • For CaF2, one formula unit makes 2 F−, so [F−] is squared.

Molar Solubility, s

Molar solubility (s) is the number of moles of salt that dissolve per liter of saturated solution. The ion concentrations come from s.

SaltIons at equilibriumKsp in terms of s
AgCl[Ag+] = s, [Cl−] = sKsp = s2
CaF2[Ca2+] = s, [F−] = 2sKsp = (s)(2s)2 = 4s3

Watch out: (2s)2 = 4s2, not 2s2. Forgetting to square the 2 is the most common mistake.

Comparing Solubility

  • Same ion ratio → the larger Ksp is more soluble. AgCl (Ksp = 1.8 × 10−10) is more soluble than AgBr (Ksp = 5.0 × 10−13), since both are 1:1.
  • Different ratios → you cannot compare Ksp values directly. Calculate s for each salt (see Example 4).

Ksp and the Solubility Rules

A number line of Ksp values with 10 to the −20 and 10 to the −10 on the left side labeled insoluble in quotes, and 1 toward the right side labeled soluble.
  • Ksp > 1 → what we called soluble in Unit 4 (like NaCl).
  • Tiny Ksp → what we called “insoluble.” But even a salt with Ksp = 10−20 dissolves a tiny bit, so chemists prefer slightly soluble.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Molar Solubility of AgBr

For AgBr(s) ⇌ Ag+(aq) + Br−(aq), Ksp = 5.0 × 10−13. Calculate the molar solubility in water.

Show the solution
AgBr(s)Ag+Br−
Isolid: ignore00
C+s+s
Ess
  1. Write the expression: Ksp = [Ag+][Br−]. Leave out the solid.
  2. Set up the table: start with pure water, so no ions. s moles dissolve, so each ion goes up by s.
  3. Substitute: 5.0 × 10−13 = (s)(s) = s2
  4. Solve: s = √(5.0 × 10−13) = 7.07 × 10−7
  5. Answer: s = 7.1 × 10−7 M Less than one millionth of a mole per liter: very slightly soluble.

Example 2: Molar Solubility of PbI2

For PbI2(s) ⇌ Pb2+(aq) + 2I−(aq), Ksp = 9.8 × 10−9. Calculate the molar solubility in water.

Show the solution
PbI2(s)Pb2+2I−
Isolid: ignore00
C+s+2s
Es2s
  1. Write the expression: Ksp = [Pb2+][I−]2. Iodide has a coefficient of 2, so it is squared.
  2. Set up the table: s moles of PbI2 dissolve to give s Pb2+ and 2s I−.
  3. Substitute: 9.8 × 10−9 = (s)(2s)2 = 4s3
  4. Divide by 4: s3 = 9.8 × 10−9 / 4 = 2.45 × 10−9
  5. Take the cube root: s = ∛(2.45 × 10−9) = 1.35 × 10−3. On most calculators, raise to the (1/3) power.
  6. Answer: s = 1.3 × 10−3 M If asked for [I−], it is 2s = 2.7 × 10−3 M.

Example 3: Ksp from Solubility

The molar solubility of CaF2 is 2.1 × 10−4 M. Calculate Ksp.

Show the solution
  1. Given: s = 2.1 × 10−4 M for CaF2(s) ⇌ Ca2+ + 2F−
  2. Find each ion: [Ca2+] = s = 2.1 × 10−4 M, [F−] = 2s = 4.2 × 10−4 M
  3. Substitute: Ksp = [Ca2+][F−]2 = (2.1 × 10−4)(4.2 × 10−4)2
  4. Square the fluoride first: (4.2 × 10−4)2 = 17.64 × 10−8 = 1.76 × 10−7
  5. Multiply: (2.1 × 10−4)(1.764 × 10−7) = 3.70 × 10−11
  6. Answer: Ksp = 3.7 × 10−11

Example 4: Which Is More Soluble?

Which has the greater molar solubility in water: Ag2CrO4 (Ksp = 1.1 × 10−12) or AgCl (Ksp = 1.8 × 10−10)? Justify with calculations.

Show the solution
  1. Check the ratios: Ag2CrO4 is 2:1 and AgCl is 1:1. Different ratios, so you must calculate s. Do not just compare Ksp.
  2. Ag2CrO4: s dissolves to give 2s Ag+ and s CrO42−, so Ksp = (2s)2(s) = 4s3
  3. Solve: s3 = 1.1 × 10−12 / 4 = 2.75 × 10−13, so s = 6.5 × 10−5 M
  4. AgCl: Ksp = s2, so s = √(1.8 × 10−10) = 1.3 × 10−5 M
  5. Answer: Ag2CrO4 is more soluble: 6.5 × 10−5 M > 1.3 × 10−5 M, even though its Ksp is smaller. A favorite AP trick.

↑ Back to top


Practice

Run the Equilibrium Constant Lab

The lab opens in Ksp and Common Ion mode with PbI2. See the ICE table, the Ksp expression, and the molar solubility, then compare salts. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 7 and see an explanation right after each one. Choose Topic 7.11 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • A saturated solution is at equilibrium between the solid and its ions.
  • Ksp is the product of the ion concentrations. No solid in the expression.
  • Molar solubility, s, is the moles of salt that dissolve per liter.
  • Different ion ratios? Compare s, not Ksp.

Back to the essential question: we can calculate exactly how much of a salt dissolves from Ksp, using the molar solubility, s. Next up, Topic 7.12 Common-Ion Effect, where we see what happens when one of the salt’s ions is already in the water.

↑ Back to top


AP Alignment

This lesson covers Topic 7.11, Introduction to Solubility Equilibria, in Unit 7 (Equilibrium) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 7.11.A: Calculate the solubility of a salt based on the value of Ksp for the salt.

Essential knowledge: 7.11.A.1, 7.11.A.2, 7.11.A.3, 7.11.A.4

Suggested skill: 5.B Mathematical Routines. Identify an appropriate theory, definition, or mathematical relationship to solve a problem.

↑ Back to top