AP Chemistry · Unit 7: Equilibrium

7.7 Calculating Equilibrium Concentrations

Essential Question

How can we predict what is in the flask at equilibrium?

So far we have used equilibrium amounts to find K. This lesson goes the other way: start with K and the starting amounts, and figure out what the mixture looks like once it settles.

Video not loading? Watch it on YouTube.

Which Way Will It Go?

Calculate Q from the starting concentrations and compare it to K.

ComparisonWhat it meansDirection
Q < Ktoo few productsforward (right)
Q > Ktoo many productsreverse (left)
Q = Kalready at equilibriumno net change

Big idea: Q always moves toward K.

ICE Tables

An ICE table keeps track of the numbers. I = initial, C = change, E = equilibrium. Every entry is a molarity.

Example for A ⇌ 2B, starting with 1.00 M A and no B:

A2B
I1.000
C−x+2x
E1.00 − x2x
  • No B to start, so Q = 0 and the reaction must go forward.
  • B goes up by 2x because its coefficient is 2.
  • The E row is the I row plus the C row.

The Change Row Follows Coefficients

N2 + 3H2 ⇌ 2NH3 with the changes −x, −3x, and +2x written under each substance, if the reaction goes forward.
  • The change row uses the same mole ratio as stoichiometry.
  • Going forward: reactants get −, products get +.
  • Going in reverse: flip every sign.

The Small-x Shortcut

  • If K is very small (roughly K < 10−3), the reaction barely goes forward, so x is tiny.
  • Subtracting a tiny number barely changes the starting value: 0.50 − x ≈ 0.50.
  • Always check: (x ÷ starting concentration) × 100 should be less than 5%.
  • AP problems are usually set up so this shortcut, or a perfect square, does the job.

Steps for Equilibrium Problems

Flow chart: write K expression, compare Q and K for direction, fill in ICE table, plug E row into K, solve for x. Then use x to find each concentration.
  1. Write the K expression.
  2. If you start with both reactants and products, compare Q and K to find the direction.
  3. Fill in the ICE table.
  4. Plug the E row into the K expression.
  5. Solve for x, then plug x back in to find each equilibrium concentration.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: A Perfect Square

0.200 mol H2 and 0.200 mol I2 are placed in a 1.00 L flask. For H2(g) + I2(g) ⇌ 2HI(g), Kc = 49.0. Find all equilibrium concentrations.

Show the solution
H2I22HI
I0.2000.2000
C−x−x+2x
E0.200 − x0.200 − x2x
  1. Write the expression: Kc = [HI]2 / [H2][I2] = 49.0
  2. Initial values: 0.200 mol / 1.00 L = 0.200 M for H2 and I2. No HI, so the reaction goes forward.
  3. Change and equilibrium rows: H2 and I2 each go down by x, HI goes up by 2x (see table).
  4. Substitute: 49.0 = (2x)2 / (0.200 − x)2
  5. Take the square root of both sides: 7.00 = 2x / (0.200 − x)
  6. Solve: 1.40 − 7.00x = 2x, so 1.40 = 9.00x and x = 0.1556
  7. Plug x back in: [H2] = [I2] = 0.200 − 0.1556 = 0.0444 M, and [HI] = 2(0.1556) = 0.311 M
  8. Answer: [H2] = [I2] = 0.044 M, [HI] = 0.311 M Check: (0.311)2 / (0.0444)2 ≈ 49. It works.

Example 2: Predicting the Direction

For N2O4(g) ⇌ 2NO2(g), Kc = 4.6 × 10−3. A flask contains 0.200 M N2O4 and 0.0500 M NO2. Which way will the reaction shift to reach equilibrium?

Show the solution
  1. Write the Q expression: both reactant and product are present, so find Q. Qc = [NO2]2 / [N2O4]
  2. Substitute: Qc = (0.0500)2 / (0.200) = 0.00250 / 0.200
  3. Calculate: Qc = 0.0125 = 1.25 × 10−2
  4. Compare: Q = 1.25 × 10−2 > K = 4.6 × 10−3
  5. Answer: Q > K, so the reaction shifts in reverse (left). [NO2] decreases and [N2O4] increases. To bring Q down to K, the numerator must shrink and the denominator must grow.

Example 3: Using the Small-x Shortcut

For N2(g) + O2(g) ⇌ 2NO(g) at a high temperature, Kc = 1.0 × 10−5. Starting with 0.80 M N2 and 0.20 M O2, find [NO] at equilibrium.

Show the solution
N2O22NO
I0.800.200
C−x−x+2x
E0.80 − x0.20 − x2x
  1. Write the expression: Kc = [NO]2 / [N2][O2] = 1.0 × 10−5
  2. Fill in the table: no NO to start, so the reaction goes forward (see table).
  3. Substitute: 1.0 × 10−5 = (2x)2 / (0.80 − x)(0.20 − x). Not a perfect square, but K is tiny.
  4. Use the shortcut: 0.80 − x ≈ 0.80 and 0.20 − x ≈ 0.20, so 1.0 × 10−5 ≈ 4x2 / (0.80)(0.20)
  5. Rearrange: 4x2 = (1.0 × 10−5)(0.16) = 1.6 × 10−6, so x2 = 4.0 × 10−7
  6. Solve: x = √(4.0 × 10−7) = 6.3 × 10−4
  7. Check the shortcut: (6.3 × 10−4 / 0.20) × 100 = 0.32%, well under 5%.
  8. Answer: [NO] = 2x = 1.3 × 10−3 M Do not stop at x. The question asks for NO, which is 2x.

↑ Back to top


Practice

Run the Equilibrium Constant Lab

The lab opens in ICE table mode with this lesson’s H2 + I2 ⇌ 2HI perfect-square problem. Then try the small-x shortcut and its 5% check. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 7 and see an explanation right after each one. Choose Topic 7.7 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Compare Q to K to find the direction.
  • Use an ICE table: initial, change, equilibrium.
  • The change row follows the coefficients.
  • After solving for x, plug it back in.

Back to the essential question: we predict the equilibrium mixture using K, the starting amounts, and an ICE table. Next up, Topic 7.8 Representations of Equilibrium, where we look at equilibrium in particle pictures.

↑ Back to top


AP Alignment

This lesson covers Topic 7.7, Calculating Equilibrium Concentrations, in Unit 7 (Equilibrium) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 7.7.A: Identify the concentrations or partial pressures of chemical species at equilibrium based on the initial conditions and the equilibrium constant.

Essential knowledge: 7.7.A.1, 7.7.A.2

Suggested skill: 3.A Representing Data and Phenomena. Represent chemical phenomena using appropriate graphing techniques, including correct scale and units.

↑ Back to top