AP Chemistry · Unit 9: Thermodynamics and Electrochemistry

9.7 Coupled Reactions

Essential Question

How can we make an unfavorable reaction happen?

If ΔG° is positive, a reaction is not thermodynamically favored. Yet plants make sugar, your body builds proteins, and factories make metals, and all of those involve reactions with a positive ΔG°. In this lesson, you’ll see how.

Video not loading? Watch it on YouTube.

Unfavorable Isn’t Impossible

When ΔG° > 0, a process is not favored on its own, so it won’t make much product without help. With outside help, it can still happen. There are two ways to give that help:

  1. Add external energy: electricity or light
  2. Couple reactions: link the unfavorable reaction to a very favorable one

Driving Reactions with Electricity

2H2O(l) → 2H2(g) + O2(g)   ΔG° = +474.2 kJ/molrxn

  • Electrolysis: electricity forces a ΔG° > 0 reaction to happen
  • Charging a battery runs its reaction backward
Electrolysis of water. Two gray electrodes stand in a container of water and are wired to a power supply above. Three gas bubbles rise from the left electrode, labeled O2, and about twice as many bubbles rise from the right electrode, labeled H2.

Water will never split into hydrogen and oxygen on its own. But when two electrodes connected to a power supply are placed in the water, the electrical energy forces the reaction to happen. Oxygen bubbles form at one electrode and twice as many hydrogen bubbles form at the other, matching the 2:1 ratio in the equation. You’ll study electrolysis in detail in Topic 9.8.

The same idea applies when you charge your phone. Using the battery runs a favorable reaction that releases energy. Plugging it in uses electrical energy to push that reaction backward, the unfavorable direction, which stores the energy again.

Driving Reactions with Light

6CO2(g) + 6H2O(l) → C6H12O6(s) + 6O2(g)   ΔG° = +2879 kJ/molrxn

  • Plants absorb energy from light
  • Light drives the making of glucose, even though ΔG° > 0

Photosynthesis is enormously unfavorable: carbon dioxide and water would never turn into sugar on their own. Chlorophyll in the leaves absorbs energy from sunlight, and that energy drives the overall conversion. Light is the external energy source, just like the power supply in electrolysis.

Your cells run this reaction in reverse. Cellular respiration turns glucose and oxygen back into carbon dioxide and water with ΔG° = −2879 kJ/mol, so it’s thermodynamically favored, and it’s where you get your energy. Plants store the sun’s energy in sugar, and you release it.

Coupling Reactions

  • Pair an unfavorable reaction with a very favorable one
  • They share a common intermediate
Two meshing gears. The large blue gear is labeled favorable, ΔG° less than 0, and the smaller pink gear is labeled unfavorable, ΔG° greater than 0. The caption reads: the favorable reaction drives the other.

Think of two gears that mesh together. The big gear is a very favorable reaction with a large negative ΔG°, and it turns easily on its own. The small gear is the unfavorable reaction, which won’t turn by itself. Because the gears are linked, the big gear turns the small one.

The “teeth” that link two reactions are a common intermediate: a substance that is a product of one reaction and a reactant in the other. As long as the favorable reaction is favorable enough, the overall process has ΔG° < 0.

Smelting Copper: Adding Reactions

ReactionΔG° (298 K)
2Cu2O(s) → 4Cu(s) + O2(g)+292.0 kJ
C(s) + O2(g) → CO2(g)−394.4 kJ
2Cu2O(s) + C(s) → 4Cu(s) + CO2(g)−102.4 kJ
  • O2 is the common intermediate, so it cancels
  • Add reactions → add their ΔG° values

Heating copper(I) oxide by itself won’t make much copper, because ΔG° is +292.0 kJ. Burning carbon (charcoal or coke) is very favorable. Oxygen gas is made in the first reaction and used in the second, so it cancels when the reactions are added, just like Hess’s law from Unit 6. Adding the ΔG° values gives +292.0 + (−394.4) = −102.4 kJ, so heating copper oxide with carbon is thermodynamically favored. People have smelted metals this way for thousands of years.

ATP Powers Your Cells

ReactionΔG°
glucose + Pi → glucose-6-phosphate + H2O+13.8 kJ
ATP + H2O → ADP + Pi−30.5 kJ
glucose + ATP → glucose-6-phosphate + ADP−16.7 kJ
  • ATP → ADP releases about 30.5 kJ/mol
  • Cells couple it to reactions they need

The first step in using glucose for energy is attaching a phosphate group (Pi) to make glucose-6-phosphate, which is not favored on its own. ATP (adenosine triphosphate) is the cell’s energy currency, and its reaction with water to form ADP (adenosine diphosphate) is very favorable. The phosphate and water are the common intermediates, so they cancel. In the cell, an enzyme moves the phosphate straight from ATP onto the glucose. Adding the values gives +13.8 + (−30.5) = −16.7 kJ/mol, so the coupled reaction is favored. Your body uses this kind of coupling to build proteins, DNA, and more.

Coupling on an Energy Diagram

  • The unfavorable step goes uphill
  • The ATP step drops further, so overall ΔG° < 0
Free energy bar diagram in kJ/mol starting from a dashed zero line. A pink bar labeled make G6P rises 13.8 above zero. A blue bar labeled ATP to ADP starts at the top of the pink bar and drops 30.5, ending below zero. A yellow bar labeled overall goes from zero down to −16.7.

Starting at zero, making glucose-6-phosphate goes uphill by 13.8 kJ/mol. The ATP step then drops 30.5 kJ/mol from the top of that bar, all the way below zero, so it more than pays back the climb. The overall result is 16.7 kJ/mol below the start, so the coupled process is thermodynamically favored. Whenever you see coupling, picture a small uphill step paid for by a bigger downhill step.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Making Iron

Iron is made in a blast furnace by reacting iron(III) oxide ore with carbon monoxide. Add these reactions to find the overall reaction and its ΔG° at 298 K. Is the overall reaction thermodynamically favored?

ReactionΔG°
2Fe2O3(s) → 4Fe(s) + 3O2(g)+1484.4 kJ
6CO(g) + 3O2(g) → 6CO2(g)−1543.2 kJ
Show the solution
  1. Find the common intermediate: O2 is made in the first reaction and used in the second, with 3 moles in both, so it cancels completely.
  2. Add the reactions: 2Fe2O3(s) + 6CO(g) → 4Fe(s) + 6CO2(g)
  3. Add the ΔG° values: ΔG° = +1484.4 kJ + (−1543.2 kJ)
  4. Answer: ΔG° = −58.8 kJ/molrxn, thermodynamically favored. Both values go to the tenths place, so the answer does too.

Sample exam justification: The overall reaction is thermodynamically favored because the overall ΔG° = −58.8 kJ/molrxn < 0. The very favorable reaction of carbon monoxide with oxygen drives the unfavorable breakdown of the iron ore.

Example 2: Finding the Common Intermediate

Mercury metal is produced by heating HgS (the ore cinnabar) in air. Identify the common intermediate. Explain how coupling these reactions allows Hg(l) to be produced.

ReactionΔG°
HgS(s) → Hg(l) + S(s)+50.6 kJ
S(s) + O2(g) → SO2(g)−300.2 kJ
Show the solution
  1. Find the common intermediate: S(s) is a product of the first reaction and a reactant in the second.
  2. Add the reactions: cancel the sulfur to get HgS(s) + O2(g) → Hg(l) + SO2(g)
  3. Add the ΔG° values: ΔG° = +50.6 + (−300.2) = −249.6 kJ/molrxn
  4. Answer: S(s) is the common intermediate. Overall ΔG° = −249.6 kJ/molrxn < 0, favored.

Sample exam justification: Solid sulfur is the common intermediate because it is produced by the first reaction and consumed by the second. The first reaction alone is not thermodynamically favored, but it is coupled to the very favorable oxidation of sulfur. The overall ΔG° is −249.6 kJ/molrxn, so the overall process that produces mercury is thermodynamically favored.

Example 3: How Do Plants Do It?

For photosynthesis, 6CO2(g) + 6H2O(l) → C6H12O6(s) + 6O2(g), ΔG° = +2879 kJ/molrxn. Explain how plants are able to make glucose by this reaction. Then explain why the reverse reaction does not need light.

Show the solution
  1. Read the sign: ΔG° = +2879 kJ > 0, so making glucose is not favored on its own, and K is far less than 1.
  2. Identify the energy source: light is an external energy source. Chlorophyll absorbs energy from light, and that energy drives the reaction.
  3. Reverse the reaction: C6H12O6 + 6O2 → 6CO2 + 6H2O. Flip the sign: ΔG° = −2879 kJ < 0, so the reverse is thermodynamically favored.
  4. Answer: Light supplies the energy to drive the unfavorable reaction (ΔG° > 0). The reverse has ΔG° < 0, so it is favored without light.

Sample exam justification: Photosynthesis is not thermodynamically favored because ΔG° is positive, but plants absorb energy from light, an external energy source, which drives the reaction. The reverse reaction has ΔG° = −2879 kJ/molrxn, so it is thermodynamically favored and does not need an external energy source.

↑ Back to top


Practice

Run the Free Energy Lab

The lab opens in Dissolving and Coupled Reactions with iron extraction. Pick the favored partner, cancel the common intermediate, and add the ΔG° values. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 9 and see an explanation right after each one. Choose Topic 9.7 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • External energy (electricity, light) can drive ΔG° > 0 processes.
  • Coupled reactions share a common intermediate.
  • Add reactions → add ΔG° values.
  • Overall ΔG° < 0 means the coupled process is favored.

Back to the essential question: we make an unfavorable reaction happen by paying for it, either with outside energy or with a favorable reaction linked to it through a common intermediate. Next up, Topic 9.8 looks at galvanic and electrolytic cells, where favorable reactions make electricity and electricity drives unfavorable ones.

↑ Back to top


AP Alignment

This lesson covers Topic 9.7, Coupled Reactions, in Unit 9 (Thermodynamics and Electrochemistry) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 9.7.A: Explain the relationship between external sources of energy or coupled reactions and their ability to drive thermodynamically unfavorable processes.

Essential knowledge: 9.7.A.1, 9.7.A.2

Suggested skill: 4.D Model Analysis. Explain the degree to which a model or representation describes the connection between particulate-level properties and macroscopic properties.

↑ Back to top