AP Chemistry · Unit 9: Thermodynamics and Electrochemistry

9.11 Electrolysis and Faraday’s Law

In this lesson

Essential Question

How much metal can an electric current make?

Gold-plated jewelry, chrome car parts, and the aluminum in a soda can are all made by pushing electricity through a solution or a molten salt. By the end of this lesson, you should be able to calculate exactly how much metal you get.

Video lesson coming soon. In the meantime, read through the lesson below.

What Is Electrolysis?

  • Electrolysis: electrical energy drives a thermodynamically unfavored reaction
  • An outside power source pushes the electrons
Galvanic cellElectrolytic cell
Favored reactionElectricity forces an unfavored reaction
Makes electricityUses electricity
E° > 0E° < 0, ΔG° > 0

A galvanic cell runs a thermodynamically favored reaction, and that reaction makes electricity. Electrolysis is the reverse idea: electrical energy from a battery or power supply forces an unfavored reaction to happen in an electrolytic cell. You do electrolysis every time you charge your phone, because the charger forces the battery reaction to run backward. Plating metal and making aluminum are other examples. The goal of this lesson is to figure out how much product forms from a certain amount of electricity.

Electroplating

  • The object being plated is the cathode
  • Ag+ + e− → Ag coats the object
Silver electroplating. A silver bar and a spoon hang in a beaker of Ag+(aq) solution and are wired to a power supply above. The silver bar is labeled anode: Ag bar (+) and the spoon is labeled cathode: spoon (−).

Electroplating uses electrolysis to coat an object with a thin layer of metal. The power supply pushes electrons into the spoon, so the spoon is the cathode, where reduction happens. Ag+ ions in the solution move to the spoon, pick up one electron each, and become silver atoms stuck to the surface. At the anode, the silver bar is oxidized (Ag → Ag+ + e−), which replaces the silver ions used up at the spoon. Silver moves from the bar to the spoon, and the more electrons pushed through, the more silver is plated.

Current and Charge

I = q / t

  • I = current in amperes (A): the charge that flows past a point each second
  • q = charge in coulombs (C)
  • t = time in seconds (s)
  • 1 A = 1 C/s

The units tell you the equation: amps are coulombs per second, so current equals charge divided by time. In plating problems, you usually know the current and the time and need the charge, so rearrange to q = I × t.

Exam tip: time must be in seconds. If a problem gives minutes or hours, convert first.

The Faraday Constant

1 mol e− = 96,485 C

  • F = the charge on 1 mole of electrons
  • Converts coulombs ↔ moles of e−

One electron has a charge of 1.60218 × 10−19 C. Multiply by Avogadro’s number (6.02214 × 1023 e− per mol) and you get 96,485 C per mole of electrons. This is the Faraday constant, and it is on the AP equation sheet. Use it as a conversion factor: to go from coulombs to moles of electrons, multiply by (1 mol e− / 96,485 C). To go from moles of electrons to coulombs, multiply by (96,485 C / 1 mol e−).

Ion Charge Sets the Electrons

Ion charge = moles of e− per mole of metal

IonHalf-reactionmol e− per mol metal
Ag+Ag+ + e− → Ag1
Cu2+Cu2+ + 2e− → Cu2
Al3+Al3+ + 3e− → Al3

To make one atom of metal, an ion needs as many electrons as its charge. This is the mole ratio you use in every problem. The same amount of charge makes 1 mole of silver, ½ mole of copper, or only ⅓ mole of aluminum. Always write the half-reaction first so you get this ratio right.

The Road Map

Flowchart: current and time, then q = I × t to charge in coulombs, then divide by 96,485 C/mol e− to moles of electrons, then the mole ratio from the half-reaction to moles of metal, then multiply by molar mass to grams. A note reads: works backward too, find t or I.
  1. Current and time → charge: q = I × t (A × s = C)
  2. Charge → mol e−: divide by 96,485 C/mol e−
  3. mol e− → mol metal: use the mole ratio from the half-reaction (for example, Cu2+ + 2e− → Cu gives 1 mol Cu / 2 mol e−)
  4. mol metal → grams: multiply by the molar mass

Every Faraday’s law problem is dimensional analysis with a couple of new conversion factors. You can also run the road map backward: start from grams, work back to charge, then divide by current to find time, or divide by time to find current.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Copper Plating

A current of 2.50 A passes through a CuSO4 solution for 30.0 min. What mass of Cu is plated at the cathode? (Cu: 63.55 g/mol)

Show the solution
  1. Half-reaction: Cu2+ + 2e− → Cu, so 2 mol e− make 1 mol Cu.
  2. Convert time: 30.0 min × (60 s / 1 min) = 1800 s
  3. Find charge: q = I × t = (2.50 C/s)(1800 s) = 4500 C
  4. Charge → mol e−: 4500 C × (1 mol e− / 96,485 C) = 0.04664 mol e−
  5. Mole ratio: 0.04664 mol e− × (1 mol Cu / 2 mol e−) = 0.02332 mol Cu
  6. Mol → grams: 0.02332 mol Cu × (63.55 g / 1 mol Cu) = 1.482 g
  7. Answer: 1.48 g Cu (3 significant figures, from 2.50 A and 30.0 min)

Example 2: Time to Plate Silver

How long, in seconds, does it take to plate 2.00 g of Ag onto a spoon from a Ag+ solution using a current of 1.50 A? (Ag: 107.87 g/mol)

Show the solution
  1. Half-reaction: Ag+ + e− → Ag, so 1 mol e− makes 1 mol Ag.
  2. Grams → mol: 2.00 g Ag × (1 mol Ag / 107.87 g) = 0.01854 mol Ag
  3. Mole ratio: 0.01854 mol Ag × (1 mol e− / 1 mol Ag) = 0.01854 mol e−
  4. mol e− → charge: 0.01854 mol e− × (96,485 C / 1 mol e−) = 1789 C
  5. Solve for time: t = q / I = 1789 C / (1.50 C/s) = 1193 s
  6. Answer: 1.19 × 103 s (about 19.9 min)

Example 3: Current to Make Aluminum

Aluminum is made by electrolysis of molten Al2O3, which contains Al3+. What current is needed to produce 10.0 g of Al in 1.00 hour? (Al: 26.98 g/mol)

Show the solution
  1. Half-reaction: Al3+ + 3e− → Al, so 3 mol e− make 1 mol Al.
  2. Grams → mol: 10.0 g Al × (1 mol Al / 26.98 g) = 0.3706 mol Al
  3. Mole ratio: 0.3706 mol Al × (3 mol e− / 1 mol Al) = 1.112 mol e−
  4. mol e− → charge: 1.112 mol e− × (96,485 C / 1 mol e−) = 1.073 × 105 C
  5. Convert time: 1.00 h × (3600 s / 1 h) = 3600 s
  6. Solve for current: I = q / t = (1.073 × 105 C) / (3600 s) = 29.80 C/s
  7. Answer: 29.8 A. Real aluminum plants use hundreds of thousands of amps, because they make tons of aluminum, not 10 grams.

Example 4: Finding the Ion Charge

A current of 0.800 A flows for 45.0 min through a solution of an iron salt, and 0.625 g of Fe is deposited. What is the charge on the iron ion? (Fe: 55.85 g/mol)

Show the solution
  1. Convert time: 45.0 min × (60 s / 1 min) = 2700 s
  2. Find charge: q = I × t = (0.800 C/s)(2700 s) = 2160 C
  3. Charge → mol e−: 2160 C × (1 mol e− / 96,485 C) = 0.02239 mol e−
  4. Grams → mol Fe: 0.625 g Fe × (1 mol Fe / 55.85 g) = 0.01119 mol Fe
  5. Compare: 0.02239 mol e− / 0.01119 mol Fe = 2.00 mol e− per mol Fe
  6. Answer: The charge is 2+ (Fe2+), so the half-reaction is Fe2+ + 2e− → Fe.

Sample exam justification: The charge passed corresponds to 0.02239 mol of electrons, and 0.01119 mol of iron was deposited. That is 2 mol of electrons per mole of iron, so each iron ion gained 2 electrons and the ion is iron(II), Fe2+.

↑ Back to top


Practice

Watch Electrolysis in the Electrochemistry Cell Builder

Switch the Cell Builder to electrolytic mode, raise the applied voltage above the size of E°cell, and run it. Metal ions gain electrons at the cathode and build up on the electrode as neutral atoms, the same process that plates a spoon with silver. The animation shows direction, not rate, so use Faraday’s law to find the amounts.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 9 and see an explanation right after each one. Choose Topic 9.11 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Electrolysis: electricity drives a thermodynamically unfavored reaction.
  • I = q / t, and 1 A = 1 C/s.
  • 1 mol e− = 96,485 C.
  • Ion charge = mol e− per mol metal.
  • Road map: current and time → charge → mol e− → mol metal → grams (and backward).

Back to the essential question: multiply current by time to get charge, divide by the Faraday constant to get moles of electrons, use the half-reaction to get moles of metal, and multiply by molar mass to get grams. Run it backward to find time or current. That’s the last topic in Unit 9, so next, review the whole unit and practice AP-style free-response questions that tie thermodynamics and electrochemistry together.

↑ Back to top


AP Alignment

This lesson covers Topic 9.11, Electrolysis and Faraday’s Law, in Unit 9 (Thermodynamics and Electrochemistry) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 9.11.A: Calculate the amount of charge flow based on changes in the amounts of reactants and products in an electrochemical cell.

Essential knowledge: 9.11.A.1

Suggested skill: 5.B Mathematical Routines. Identify an appropriate theory, definition, or mathematical relationship to solve a problem.

↑ Back to top