Chemistry · Atomic Structure

Average Atomic Mass

Essential Question

Why isn’t atomic mass a whole number?

Every square on the periodic table shows an atomic mass with decimals, like 35.45 for chlorine, even though protons and neutrons are whole particles. By the end of this lesson, you should be able to explain why and calculate an atomic mass yourself.

Video not loading? Watch it on YouTube.

Isotopes

  • Isotopes: atoms of the same element with different numbers of neutrons
  • Same protons, different mass numbers
  • Hyphen notation: the element name or symbol, a hyphen, then the mass number: chlorine-35 or Cl-35
  • Nuclide symbol: the mass number at the top left of the element symbol and the atomic number at the bottom left: 3517Cl
Two cards. Chlorine-35, written as Cl-35 and as a nuclide symbol with 35 at the top left and 17 at the bottom left: 17 protons, 18 neutrons, 17 electrons. Chlorine-37, written as Cl-37 and as a nuclide symbol with 37 at the top left and 17 at the bottom left: 17 protons, 20 neutrons, 17 electrons.

Both atoms have 17 protons, so both are chlorine. As neutral atoms, both also have 17 electrons. Only the neutrons differ: chlorine-35 has 18 (17 + 18 = 35), and chlorine-37 has 20 (17 + 20 = 37). In a nuclide symbol, the top number minus the bottom number gives the neutrons: 37 − 17 = 20. Different numbers of neutrons mean different masses, and that’s the key to this lesson.

Nuclear stability. Many isotopes have a stable nucleus, which does not change over time. Other isotopes are unstable. An unstable nucleus breaks apart over time and gives off radiation, so the isotope is radioactive. A nucleus is stable only when its protons and neutrons are in the right balance. Small atoms are stable with about equal numbers of protons and neutrons, and larger atoms need more neutrons than protons. Carbon-12 (6 protons, 6 neutrons) and carbon-13 (6 protons, 7 neutrons) are stable, but carbon-14 (6 protons, 8 neutrons) is radioactive. Adding or removing neutrons can make a nucleus unstable. Adding or removing protons changes the element itself.

The Atomic Mass Unit

  • 1 amu = 1/12 the mass of a carbon-12 atom
  • Protons and neutrons are each about 1 amu.
A bar divided into 12 equal cells labeled one carbon-12 atom equals exactly 12 amu. The first cell is highlighted and labeled 1 amu.

Atoms are too light to measure in grams conveniently, so we use atomic mass units (amu). One carbon-12 atom is defined as exactly 12 amu. Because protons and neutrons are each about 1 amu, an isotope’s mass in amu is very close to its mass number. Chlorine-35 has a mass of about 35 amu.

Percent Abundance

  • Percent abundance: how common each isotope is in nature
  • All abundances add up to 100%.
A sample of 20 chlorine atoms: 15 light green chlorine-35 atoms (75%) and 5 dark green chlorine-37 atoms (25%).

In this sample of 20 chlorine atoms, 15 are chlorine-35 (75%) and 5 are chlorine-37 (25%). Real chlorine is very close to this: about 76% chlorine-35 and 24% chlorine-37. Every atom is one isotope or another, so the abundances always add up to 100%.

What Is Average Atomic Mass?

  • The weighted average mass of all of an element’s naturally occurring isotopes
  • This is the atomic mass on the periodic table.
A number line with chlorine-35 and chlorine-37 marked. A red arrow marks the average, 35.45 amu, much closer to chlorine-35.

Chlorine’s average atomic mass, 35.45 amu, is not halfway between 35 and 37. It’s much closer to chlorine-35, because chlorine-35 is the more common isotope and pulls the average toward itself. No single chlorine atom actually has a mass of 35.45 amu. It’s the average of all the chlorine atoms in a sample, and that’s why atomic masses have decimals.

Why Not a Simple Average?

Two cards. Simple average: (35 + 37) divided by 2 = 36 amu, ignores abundance. Weighted average: 35.45 amu, matches the periodic table.

A simple average treats both isotopes as if they were equally common, so it gives 36 amu, which doesn’t match the periodic table. A weighted average counts more common isotopes more. It works like a class grade where tests count for 80% and homework for 20%: the tests have a bigger effect on your grade, just like the more common isotope has a bigger effect on the average atomic mass.

Calculating Average Atomic Mass

Average atomic mass = (mass1 × abundance1) + (mass2 × abundance2) + …

  • Use abundance as a decimal: divide the percent by 100, so 75.78% → 0.7578.
  • One term per isotope: 3 isotopes → 3 terms.

Steps to Solve

  1. Convert each percent abundance to a decimal.
  2. Multiply each isotope’s mass by its decimal abundance.
  3. Add the products.
  4. Round the final answer with significant figures. A product keeps as many significant figures as the factor with the fewest. A sum keeps as many decimal places as the term with the fewest.
  5. Check the answer: it must fall between the lightest and heaviest isotope masses and be closest to the most abundant isotope.

Keep extra digits until the final answer. Rounding in the middle of a problem can throw off your result.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Two Isotopes

Use the data to calculate the average atomic mass of chlorine.

IsotopeMass (amu)Abundance
Cl-3534.96975.78%
Cl-3736.96624.22%
Show the solution
  1. Given: Cl-35 is 34.969 amu (75.78%), and Cl-37 is 36.966 amu (24.22%).
  2. Find: the average atomic mass of chlorine
  3. Plan: change each percent to a decimal, multiply each mass by its decimal, then add the products.
  4. Solve: 75.78% → 0.7578 and 24.22% → 0.2422. Then 34.969 amu × 0.7578 = 26.4995 amu, and 36.966 amu × 0.2422 = 8.9532 amu. Add: 26.4995 amu + 8.9532 amu = 35.4527 amu.
  5. Round: each abundance has 4 significant figures, so each product keeps 4: 26.50 amu and 8.953 amu. The sum keeps 2 decimal places, the fewest of the two terms.
  6. Answer: 35.45 amu
  7. Check: 35.45 is between 34.969 and 36.966, closer to the more common chlorine-35, and matches the periodic table.

Example 2: Three Isotopes

Use the data to calculate the average atomic mass of magnesium.

IsotopeMass (amu)Abundance
Mg-2423.98578.99%
Mg-2524.98610.00%
Mg-2625.98311.01%
Show the solution
  1. Given: Mg-24 is 23.985 amu (78.99%), Mg-25 is 24.986 amu (10.00%), and Mg-26 is 25.983 amu (11.01%).
  2. Find: the average atomic mass of magnesium
  3. Plan: the same three steps as Example 1. Three isotopes means three terms.
  4. Solve: the decimals are 0.7899, 0.1000, and 0.1101 (they add up to 1.0000). Then 23.985 × 0.7899 = 18.9458 amu, 24.986 × 0.1000 = 2.4986 amu, and 25.983 × 0.1101 = 2.8607 amu. Add: 18.9458 + 2.4986 + 2.8607 = 24.3051 amu.
  5. Round: each product keeps 4 significant figures (18.95, 2.499, and 2.861 amu), so the sum keeps 2 decimal places.
  6. Answer: 24.31 amu
  7. Check: 24.31 is between 23.985 and 25.983 and closest to magnesium-24, the most abundant isotope.

Example 3: Which Is More Common?

Copper has two isotopes, copper-63 and copper-65. Its average atomic mass is 63.55 amu. Which isotope is more abundant? Explain.

Show the solution
  1. Find the midpoint: halfway between 63 and 65 is 64.
  2. Compare: 63.55 is less than 64, so the average is closer to 63.
  3. Answer: Copper-63 is more abundant.
  4. Sentence frames: Claim: ________ is more abundant. Evidence: the average atomic mass, ________ amu, is closer to ________ than to ________. Reasoning: a weighted average is pulled toward ________, so ________.
  5. Sample answer: Claim: copper-63 is more abundant. Evidence: copper’s average atomic mass, 63.55 amu, is closer to 63 than to 65. Reasoning: a weighted average is pulled toward the more common isotope, so copper-63 must be more common than copper-65.

Example 4: Finding Abundance

Boron has two isotopes: boron-10 (10.013 amu) and boron-11 (11.009 amu). Its average atomic mass is 10.81 amu. Find the percent abundance of each isotope.

Show the solution
  1. Given: boron-10 is 10.013 amu, boron-11 is 11.009 amu, and the average atomic mass is 10.81 amu.
  2. Find: the percent abundance of each isotope
  3. Plan: let x = the decimal abundance of boron-10. The abundances add up to 1, so boron-11 = 1 − x. Write the weighted average and solve for x, the same way you solve a linear equation in Algebra 1.
  4. Solve: 10.013x + 11.009(1 − x) = 10.81. Distribute: 10.013x + 11.009 − 11.009x = 10.81. Combine: −0.996x = 10.81 − 11.009 = −0.199, so x = 0.199 ÷ 0.996 = 0.200.
  5. Answer: boron-10 = 20.0% and boron-11 = 80.0%
  6. Check: 10.013 × 0.200 + 11.009 × 0.800 = 10.81 amu, which matches. Also, 10.81 is much closer to 11 than to 10, so boron-11 should be the more common isotope. It is.

↑ Back to top


Practice

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Isotopes of an element have different numbers of neutrons, so they have different masses.
  • Write an isotope as chlorine-35 (Cl-35) or as a nuclide symbol.
  • Percent abundance tells how common each isotope is.
  • Atomic mass is a weighted average.
  • It is closest to the most common isotope.

Back to the essential question: atomic mass isn’t a whole number because it’s an average of isotopes with different masses, weighted by how common each one is. Next up, we’ll see how scientists measure isotope masses and abundances using a mass spectrometer.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-1: Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
  • HS-PS1-8: Develop models to illustrate the changes in the composition of the nucleus of the atom and the energy released during the processes of fission, fusion, and radioactive decay.

Disciplinary core ideas: PS1.A Structure and Properties of Matter; PS1.C Nuclear Processes

↑ Back to top