Chemistry · Atomic Structure

Nuclear Stability and Nuclear Energy

In this lesson

Take it with you

Essential Question

How can changes in the nucleus release energy that people use?

So far in this unit, chemistry has happened in the electrons while the nucleus stayed the same. But some nuclei are unstable and change on their own, and others can be split apart or joined together. By the end of this lesson, you should be able to explain why some nuclei are unstable, write balanced nuclear equations, and compare fission, fusion, and chemical reactions.

Video lesson coming soon. In the meantime, read through the lesson below.

Stable and Unstable Nuclei

  • Protons repel each other because they all have a positive charge.
  • The strong nuclear force pulls protons and neutrons together, but only over very short distances.
  • Neutrons add strong force without adding any repulsion.
Graph of neutrons versus protons. A dotted band of stable nuclei curves upward above the dashed N = Z line: small stable nuclei have about equal numbers of protons and neutrons, and larger ones need more neutrons. Above the band there are too many neutrons, and below it too many protons. After Z = 83, every isotope is radioactive. Carbon-12 sits on the band and carbon-14 sits just above it.

Each dot on the graph is a stable nucleus. Small stable nuclei have about the same number of neutrons and protons, so they sit near the N = Z line. Larger nuclei need extra neutrons to hold all of their protons together, so the band of stability curves upward. A nucleus outside the band is unstable, or radioactive: sooner or later it changes on its own to become more stable. Carbon-12 (6 protons, 6 neutrons) is stable. Carbon-14 (6 protons, 8 neutrons) has too many neutrons, so it is radioactive. Every element after bismuth (atomic number 83) has only radioactive isotopes.

Three Kinds of Radioactive Decay

  • Radioactive decay: an unstable nucleus gives off radiation and changes into a more stable nucleus.
  • Alpha and beta decay change the element. Gamma decay only gives off extra energy.
TypeWhat comes outSymbolChargeMass number
Alpha (α)Helium-4 nucleus (2 protons, 2 neutrons)42He2+4
Beta (β)Fast-moving electron0−1e1−0
Gamma (γ)High-energy light00γ00

Where does a beta particle come from if the nucleus has no electrons? In beta decay, a neutron changes into a proton and an electron. The proton stays in the nucleus and the electron shoots out, so the atomic number goes up by 1. Nuclei with too many neutrons (above the band of stability) often undergo beta decay, and very large nuclei often undergo alpha decay. Gamma rays usually come out along with alpha or beta decay and carry away extra energy.

Stopping Radiation

A radioactive source on the left gives off three arrows. The alpha arrow stops at a thin sheet of paper, the beta arrow passes through the paper and stops at a sheet of aluminum, and the gamma arrow passes through both and stops at a thick block of lead.
  • Alpha: largest and slowest; stopped by a sheet of paper or the outer layer of your skin
  • Beta: smaller and faster; stopped by a thin sheet of aluminum
  • Gamma: no mass and no charge; needs thick lead or concrete to block most of it

Radiation can damage living cells, so people who work with it follow three rules: spend as little time near the source as possible, keep a safe distance, and use shielding. Alpha particles can’t get through your skin, but an alpha source that is swallowed or breathed in is very dangerous.

Balancing Nuclear Equations

  • The top numbers (mass numbers) add up to the same total on both sides.
  • The bottom numbers (atomic numbers) add up to the same total on both sides.
  • The atomic number tells you which element it is.

23892U → 23490Th + 42He

This is the alpha decay of uranium-238. Top: 238 = 234 + 4. Bottom: 92 = 90 + 2. Both sides balance. To find a missing particle, subtract: the missing mass number is the top total minus the known top numbers, and the missing atomic number is the bottom total minus the known bottom numbers. Then look up that atomic number on the periodic table to name the element. Shortcut: alpha decay lowers the mass number by 4 and the atomic number by 2. Beta decay keeps the mass number the same and raises the atomic number by 1.

Fission

  • Fission: a large nucleus splits into two medium-sized nuclei.
  • A neutron hitting a uranium-235 nucleus starts it.
  • Each fission releases 2 or 3 neutrons and a lot of energy.
A neutron hits a uranium-235 nucleus. The nucleus splits into a barium-141 nucleus and a krypton-92 nucleus, three neutrons fly out, and energy is released.

10n + 23592U → 14156Ba + 9236Kr + 3 10n

Fission equations balance the same way. Top: 1 + 235 = 236, and 141 + 92 + 3(1) = 236. Bottom: 0 + 92 = 92, and 56 + 36 + 3(0) = 92. Uranium-235 can split in many different ways, so you will see other pairs of products too, but the totals always balance.

Chain Reactions

  • The neutrons from one fission can split more uranium-235 nuclei.
  • If each fission causes 3 more, the count goes 1, 3, 9, 27, 81, and keeps growing.
  • Control rods absorb extra neutrons to keep the reaction steady.
A chain reaction diagram. One fission sends out three neutrons that cause 3 fissions, and those send out nine neutrons that cause 9 fissions. The count keeps tripling: 27, then 81.

A chain reaction is like a row of dominoes where each domino knocks over three more. Left alone, the number of fissions grows so fast that the energy would come out almost all at once. In a nuclear power plant, control rods made of materials such as boron or cadmium soak up extra neutrons. Operators move the rods in or out so that, on average, each fission causes just one more fission. That keeps the energy release steady.

Fusion

  • Fusion: two small nuclei join to make a larger nucleus.
  • It needs temperatures of millions of degrees, so the positive nuclei move fast enough to push past their repulsion.
  • Fusion powers the sun and other stars.
A hydrogen-2 nucleus and a hydrogen-3 nucleus join to make a helium-4 nucleus and a neutron, and energy is released.

21H + 31H → 42He + 10n

Check: top 2 + 3 = 5 = 4 + 1, and bottom 1 + 1 = 2 = 2 + 0. Fusion releases even more energy per gram of fuel than fission, and its main product, helium, is not radioactive. The hard part is reaching and holding those extreme temperatures, so scientists are still working on fusion power plants.

Nuclear Energy Compared with Chemical Energy

Chemical changeNuclear change
What changesElectrons (bonds break and form)Protons and neutrons in the nucleus
Does the element change?NoOften, yes
Energy per atomA few eVMillions of eV

Energy for a single atom is measured in electron volts (eV), a very small unit of energy. Burning one carbon atom (C + O2 → CO2) releases about 4 eV. Splitting one uranium-235 nucleus releases about 200 million eV. That’s about 50 million times more energy from a single atom. Where does that energy come from? The products of a nuclear change have slightly less mass than the starting nuclei, and that missing mass turns into energy (Einstein’s E = mc2).

Uses and Risks of Nuclear Energy

  • Electricity: nuclear power plants use fission to boil water, and the steam spins turbines.
  • Sunlight: fusion in the sun’s core makes the light and heat that reach Earth.
  • Medicine: radioactive tracers help doctors see inside the body, and radiation can kill cancer cells.
  • Everyday uses: smoke detectors use a tiny alpha source, and carbon-14 helps scientists find the age of ancient objects.

Nuclear power plants give off no carbon dioxide while they run, and a small amount of fuel makes a huge amount of electricity. The tradeoff is that used fuel stays radioactive for thousands of years and must be stored safely, and accidents, though rare, can release radiation.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Alpha Decay

Radium-226, 22688Ra, undergoes alpha decay. Write the balanced nuclear equation and name the new element.

Show the solution
  1. Given: radium-226 has a mass number of 226 and an atomic number of 88. An alpha particle is 42He.
  2. Find: the new nucleus
  3. Plan: write the equation with a blank for the new nucleus, then subtract to find its numbers.
  4. Solve: mass number 226 − 4 = 222. Atomic number 88 − 2 = 86. Element 86 is radon (Rn).
  5. Answer: 22688Ra → 22286Rn + 42He; the new element is radon.
  6. Check: top 222 + 4 = 226 and bottom 86 + 2 = 88, so both sides balance.

Example 2: Beta Decay

Carbon-14, 146C, undergoes beta decay. Write the balanced nuclear equation. What does carbon-14 become?

Show the solution
  1. Given: carbon-14 has a mass number of 14 and an atomic number of 6. A beta particle is 0−1e.
  2. Find: the new nucleus
  3. Plan: in beta decay a neutron becomes a proton, so the mass number stays the same and the atomic number goes up by 1.
  4. Solve: mass number 14 − 0 = 14. Atomic number 6 − (−1) = 7. Element 7 is nitrogen (N).
  5. Answer: 146C → 147N + 0−1e; carbon-14 becomes nitrogen-14.
  6. Check: top 14 = 14 + 0 and bottom 6 = 7 + (−1), so both sides balance.

Example 3: Fission or Fusion?

Classify each reaction as fission or fusion, and show that each one is balanced.

  • (a) 10n + 23592U → 9438Sr + 14054Xe + 2 10n
  • (b) 32He + 32He → 42He + 2 11H
Show the solution
  1. Plan: fission starts with one large nucleus and ends with smaller ones. Fusion starts with small nuclei and ends with a larger one.
  2. (a): one uranium-235 nucleus splits into strontium-94 and xenon-140, so this is fission. Top: 1 + 235 = 236, and 94 + 140 + 2(1) = 236. Bottom: 0 + 92 = 92, and 38 + 54 + 2(0) = 92.
  3. (b): two helium-3 nuclei join to make helium-4, so this is fusion. Top: 3 + 3 = 6, and 4 + 2(1) = 6. Bottom: 2 + 2 = 4, and 2 + 2(1) = 4.
  4. Answer: (a) fission; (b) fusion. Both equations are balanced.

Example 4: Controlling a Chain Reaction

Explain why a nuclear power plant must control its fission chain reaction, and how control rods do it. Use the chain reaction diagram above (under Chain Reactions).

Show the solution
  1. Sentence frames: Claim: The chain reaction must be controlled because ________. Evidence: In the diagram, each fission ________. Reasoning: Control rods ________, so ________.
  2. Claim: an uncontrolled chain reaction would release energy too fast to use safely.
  3. Evidence: in the diagram, each fission releases 3 neutrons, so the number of fissions triples at every step: 1, 3, 9, 27, 81.
  4. Reasoning: control rods absorb extra neutrons. When about one neutron from each fission goes on to cause another fission, the number of fissions stays steady instead of growing.

Sample answer: A power plant must control the chain reaction because each fission releases more neutrons than it uses. In the diagram, one fission leads to 3, then 9, then 27 fissions, so the energy release would grow very fast and overheat the reactor. Control rods absorb the extra neutrons so that each fission causes about one more fission, which keeps the energy release steady.

↑ Back to top


Practice

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Protons repel each other, and the strong nuclear force holds the nucleus together. Nuclei outside the band of stability are radioactive.
  • Alpha decay lowers the mass number by 4 and the atomic number by 2. Beta decay raises the atomic number by 1.
  • In a nuclear equation, the mass numbers and the atomic numbers balance on both sides.
  • Fission splits a large nucleus. Fusion joins small nuclei.
  • Nuclear changes release millions of times more energy per atom than chemical changes.

Back to the essential question: when an unstable nucleus decays, splits in fission, or joins in fusion, a tiny amount of mass turns into a large amount of energy. People use that energy to make electricity, treat disease, and more. Next up, we’ll look at how an element’s position on the periodic table predicts its properties.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-8: Develop models to illustrate the changes in the composition of the nucleus of the atom and the energy released during the processes of fission, fusion, and radioactive decay.

Disciplinary core ideas: PS1.C Nuclear Processes

↑ Back to top