Chemistry · Kinetics

Factors Affecting Reaction Rate

Essential Question

What makes a reaction go faster?

Why do we keep food in the refrigerator, and why does a campfire start better with small sticks than with a big log? By the end of this lesson, you should be able to explain both with one big idea, collision theory, and use it to predict how temperature, concentration, surface area, pressure, the nature of the reactants, and catalysts change a reaction’s rate.

Video not loading? Watch it on YouTube.

Reaction Rate

  • Reaction rate: how fast reactants become products
  • Some reactions take years, and some take seconds.
A timeline arrow from slower to faster with three cards: rusting iron takes days to years, cooking an egg takes minutes, and fireworks take under a second.

Reactants are the substances you start with, and products are the new substances that form. Rusting, a reaction between iron, oxygen, and water, can take days or even years. Cooking an egg takes a few minutes, and the reactions inside a firework happen in a split second. Every reaction has its own speed, so the question is: what can we change to speed a reaction up or slow it down? The study of how fast reactions go, and why, is called kinetics.

Collision Theory

  • Particles must collide.
  • They must hit with enough energy.
  • They must hit in the right orientation.
Two rows of particle diagrams. Top row, effective collision: atom C hits the B end of molecule A-B, producing A and B-C, labeled reaction. Bottom row, ineffective collision: atom C hits the A end of A-B and bounces off, labeled no reaction.

Orientation means which way the particles are facing when they hit. In the top row, C hits the B end of A-B, right where the new B-C bond needs to form, so it is an effective collision: one that actually makes products. In the bottom row, C hits the A end, so even a hard hit just bounces apart. The big idea for this whole lesson: anything that causes more effective collisions every second makes a reaction go faster. A reaction that happens in a single step, like this one, is called an elementary reaction. If the step needs two particles to collide, as C and A-B do here, it is bimolecular. If one particle breaks apart or rearranges by itself, it is unimolecular. Steps that need three particles to hit at the same instant are rare.

Activation Energy

  • Activation energy (Ea): the minimum energy needed to react
  • Like a hill the particles must climb over
Energy diagram of potential energy versus reaction progress. The curve starts at the reactants level, rises over a hill, and drops to a lower products level. A red double arrow from the reactants level to the top of the hill is labeled Ea.

This energy diagram, called an energy profile, shows potential energy, the energy stored in bonds, as the reaction moves from reactants to products. The reactants can’t slide straight down to the products. They first have to climb a hill, and the height of that hill is the activation energy. The route the particles follow from reactants, over the hill, to products is the reaction pathway. If a collision has less energy than Ea, the particles bounce apart, like a bike that rolls back because you didn’t push hard enough. Low Ea usually means a fast reaction, and high Ea usually means a slow one.

Temperature

  • Faster particles, more collisions
  • More collisions have enough energy to reach Ea.
Two boxes of the same red and blue particles. At low temperature the particles have short motion arrows, and after an arrow labeled heat, at high temperature the same particles have long motion arrows.

Temperature is a measure of how fast particles are moving. Raising it does two things: faster particles run into each other more often, and, even more important, they hit harder, so a bigger share of collisions make it over the activation energy hill. That is why cooking on high heat is faster and why refrigerators slow down the reactions that spoil food.

Concentration

  • More particles in the same space
  • More collisions every second
Two beakers with the same volume of solution. The low concentration beaker holds 6 reactant particles, and the high concentration beaker holds 14. A key shows red as reactant A and blue as reactant B.

Concentration is how much of a substance is packed into a certain amount of space. For solutions, we usually measure it in molarity. Both beakers hold the same volume, but the right one has 14 particles instead of 6, so the particles bump into each other much more often. Think of a hallway: nearly empty, you rarely bump into anyone, but packed between classes, you bump into people constantly.

Surface Area

  • Smaller pieces expose more surface.
  • More surface, more collisions
A large cube made of a 2 by 2 by 2 grid, labeled surface area 24 square units, with an arrow labeled cut into 8 pointing to eight small cubes, labeled surface area 48 square units.

Surface area is the total area of the outside of a solid. It matters when a reactant is a solid, because only the particles on the surface can be hit. A cube 2 units on each edge has 6 faces × 4 = 24 square units of surface. Cut it into 8 cubes 1 unit on each edge and you get 8 × 6 × 1 = 48 square units: the same amount of stuff with twice the surface. That is why powders react faster than chunks and small sticks catch fire faster than a big log.

Pressure (Gases)

  • Same gas in a smaller volume
  • Reacting particles meet more often.
Two cylinders with pistons, each holding the same 10 red and blue gas particles. An arrow labeled squeeze points from the low pressure cylinder to the high pressure cylinder, where the piston is pushed down and the particles are crowded together.

Pressure only matters when the reactants are gases. Pushing the piston down squeezes the same 10 particles into a smaller volume, which raises the pressure, so red and blue particles run into each other much more often. This is really the concentration idea again: higher pressure packs more gas particles into each liter, which means a faster reaction.

Nature of Reactants

  • Some substances are more reactive than others.
  • Ions in solution react quickly.
Two beakers of water. In the left one, a piece of sodium (Na) floats with bubbles below it, labeled sodium fizzes in seconds. In the right one, an iron (Fe) nail lies on the bottom, labeled iron rusts over weeks.

Sodium gives up its electron very easily, so its activation energy is low and it fizzes out hydrogen gas in seconds. An iron nail in the same water takes days or weeks to show rust. Ions dissolved in water react fast too: Ag+ + Cl− → AgCl forms a white solid instantly, because the ions are already separated and just need to meet. Unlike the other factors, you can’t adjust this one. It depends on what you are working with.

Catalysts

  • Lowers Ea by providing a new pathway
  • Not used up
  • Enzymes: the body’s catalysts
Energy diagram comparing a solid blue curve with a tall hill, labeled no catalyst, to a dashed red curve with a shorter hill, labeled with catalyst. Both start and end at the same energy, and the red Ea arrow is shorter than the blue Ea arrow.

A catalyst is a substance that speeds up a reaction without being used up. It gives the reaction a different route, a new mechanism or series of steps, with a lower hill, like a tunnel through a mountain instead of hiking over the top, while the reactants and products stay at the same energy. With a lower Ea, many more collisions have enough energy to react, and the catalyst comes out unchanged so it can be used again and again. An enzyme is a biological catalyst, usually a protein, like the enzymes in your saliva that start breaking down starch while you chew.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Which Is Faster?

Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g). Which setup reacts faster? Explain using collision theory.

Setup ASetup B
Zinc1.0 g lump1.0 g powder
HCl1.0 M1.0 M
Temp.25 °C25 °C
Show the solution
  1. Find what is different: same mass of zinc, same 1.0 M HCl, same 25 °C. Only the zinc’s form changes (lump vs. powder), so the factor is surface area.
  2. Reason it out: powder = more surface area → more Zn atoms exposed to HCl.
  3. Connect to collision theory: more exposed zinc → more collisions with hydrogen ions per second → more effective collisions per second → faster rate.
  4. Answer: Setup B (the powder) reacts faster, because its greater surface area allows more collisions per second. You would see it fizz much more quickly.

Example 2: The Refrigerator

Milk spoils in about a day on the counter (25 °C) but lasts about a week in the refrigerator (4 °C). Which factor explains this? Use collision theory to explain.

Show the solution
  1. Identify the factor: the milk is the same, and only the storage temperature changes (25 °C vs. 4 °C). Factor: temperature. Spoiling is caused by chemical reactions, many of them run by bacteria.
  2. Think about the particles: lower T → particles move slower → fewer collisions.
  3. Think about energy: slower particles hit more gently → fewer collisions have enough energy to get over Ea.
  4. Answer: Temperature: cold = fewer effective collisions = slower spoiling. The cold fridge means fewer collisions, and fewer with enough energy, so the milk lasts days longer.

Example 3: Adding a Catalyst

2H2O2(aq) → 2H2O(l) + O2(g) is slow. A pinch of MnO2 makes it fizz quickly, and the MnO2 is unchanged at the end. Explain why.

Show the solution
  1. Identify what MnO2 is: it speeds up the reaction and is not used up, which is the definition of a catalyst.
  2. Explain how: the catalyst provides a new pathway with a lower activation energy. The reactants and products stay the same, and only the hill gets shorter.
  3. Connect to collision theory: lower Ea → a much bigger share of collisions have enough energy → more effective collisions per second → faster rate, seen as fast fizzing from the O2 gas.
  4. Answer: MnO2 is a catalyst: it lowers Ea → faster rate, and it is not used up. Fun fact: your cells have an enzyme called catalase that does this exact same job.

↑ Back to top


Practice

Practice with the Kinetics and Collision Theory Sandbox

Watch particles collide, change the temperature, the concentration and the activation energy, add a catalyst, and see why only some collisions lead to a reaction.

Lab worksheet: PDF | Answer key: PDF

Practice with the Iodine Clock Lab

Mix two clear solutions and time the sudden switch to dark blue, change the potassium iodate concentration and the temperature, then use your data to hit a 20-second clock.

Lab worksheet: PDF | Answer key: PDF

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Reactions need effective collisions.
  • More collisions, faster reaction.
  • Higher temperature: more collisions reach Ea.
  • Catalysts lower Ea and are not used up.

Back to the essential question: anything that gives the particles more effective collisions every second makes a reaction go faster: more collisions (higher concentration, more surface area, higher gas pressure), harder collisions (higher temperature), or a lower hill to climb (a catalyst). Next up is Calculating Reaction Rate, where we put actual numbers on how fast a reaction goes.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-5: Apply scientific principles and evidence to provide an explanation about the effects of changing the temperature or concentration of the reacting particles on the rate at which a reaction occurs.

Disciplinary core ideas: PS1.B Chemical Reactions

↑ Back to top