In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Equilibrium Constant Lab (activity)
Essential Question
How can we find concentrations at equilibrium?
You already know how to write an equilibrium constant expression, but you need the right concentrations to plug into it. By the end of this lesson, you should be able to set up a RICE table, use x and the coefficients to describe the change, and solve for x to find K or the equilibrium concentrations.
Video not loading? Watch it on YouTube.
What Is a RICE Table?
- A table that organizes the concentrations in an equilibrium problem
- Reaction: the balanced equation
- Initial: the starting values
- Change: the amount that reacts
- Equilibrium: the final values

Each letter of RICE is one row of the table. The balanced equation goes across the top, one substance per column, with the plus signs and the equilibrium arrow in their own narrow columns. The Change row is usually unknown at first, so we call it x. Think of it like a bank account: what you started with, plus the change, gives what you have at the end, and those final values are the ones that go into K.
Use Molarity
- Every entry in the table is in molarity (M).
- Given moles? Convert to molarity first.

Molarity, capital M, means moles of solute per liter, and K is built from molar concentrations. If a problem gives you moles and the volume of the flask, never put the moles in the table. Divide moles by liters first: 0.50 mol ÷ 2.0 L = 0.25 M. Only after converting does the number go into the I row.
The Change Row Uses Coefficients
- Reactants lose: use −
- Products gain: use +

In N2 + 3H2 ⇌ 2NH3, N2 has an invisible coefficient of 1, H2 has 3, and NH3 has 2. Those coefficients give the ratio in which things react. When the reaction moves forward, reactants get used up, so their changes are −x and −3x, and the product is made, so its change is +2x. Quick check: the x terms always match the coefficients.
The Equilibrium Row
E = I + C
- Add down each column.

Substance A starts at 0.50 M and is a reactant that gets used up, so its change is −x. Adding down the column gives 0.50 + (−x) = 0.50 − x, the equilibrium concentration of A. You can’t simplify it further until you find x, and that’s fine. Every column works the same way.
The Steps
- Fill in the I row.
- Write the C row with x.
- Find the E row: E = I + C.
- Solve for x, then plug into K.

Fill the Initial row with starting concentrations in molarity, and write zero for anything not there at the start. Write the Change row using x and the coefficients, minus for reactants and plus for products. Add down each column for the Equilibrium row, then solve for x and plug the equilibrium values into K. Sometimes you’ll solve for K, and sometimes you’ll know K and solve for the concentrations, but the table is set up the same either way.
Finding x from One Known Value
- Know one equilibrium (E) value?
- Set its E entry equal to that value and solve for x.

Often the problem tells you one equilibrium concentration, and that one number unlocks the whole table. Product B started at 0 and gained 2x, so its E entry is 2x. If [B] at equilibrium is 0.0400 M, then 2x = 0.0400 M, and dividing by 2 gives x = 0.0200 M. Now you can fill in every other number in the E row.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Find K
N2O4(g) ⇌ 2NO2(g). A flask starts with 0.100 M N2O4 and no NO2. At equilibrium, [NO2] = 0.0400 M. Calculate K.
| R | N2O4 | ⇌ | 2NO2 |
|---|---|---|---|
| I | |||
| C | |||
| E |
Show the solution
- Initial: N2O4 = 0.100, NO2 = 0. Both are already in molarity, so no conversion is needed.
- Change: NO2 starts at zero, so the reaction moves forward. N2O4 = −x, NO2 = +2x (coefficient of 2).
- Equilibrium: N2O4 = 0.100 − x, NO2 = 2x
- Solve for x: 2x = 0.0400 M, so x = 0.0200 M
- Plug in x: [N2O4] = 0.100 − 0.0200 = 0.0800 M
- K expression: K = [NO2]2 / [N2O4]. NO2 is squared because of its coefficient.
- Substitute: K = (0.0400)2 / (0.0800) = 0.00160 / 0.0800 = 0.0200 (three sig figs, no units)
- Answer: K = 0.0200
Example 2: Two Reactants
CO(g) + H2O(g) ⇌ CO2(g) + H2(g). Initially [CO] = [H2O] = 0.500 M and no products. At equilibrium [CO2] = 0.300 M. Calculate K.
| R | CO | + | H2O | ⇌ | CO2 | + | H2 |
|---|---|---|---|---|---|---|---|
| I | |||||||
| C | |||||||
| E |
Show the solution
- Initial: CO = 0.500, H2O = 0.500, CO2 = 0, H2 = 0
- Change: the reaction moves forward and every coefficient is 1. CO = −x, H2O = −x, CO2 = +x, H2 = +x
- Equilibrium: CO = 0.500 − x, H2O = 0.500 − x, CO2 = x, H2 = x
- Solve for x: [CO2] = x = 0.300 M. No dividing needed this time.
- Plug in x: [CO] = [H2O] = 0.500 − 0.300 = 0.200 M and [CO2] = [H2] = 0.300 M
- K expression: K = [CO2][H2] / ([CO][H2O]). All the exponents are 1.
- Substitute: K = (0.300)(0.300) / ((0.200)(0.200)) = 0.0900 / 0.0400 = 2.25
- Answer: K = 2.25. K is bigger than 1, so products are favored a little at equilibrium.
Example 3: Start with Moles
0.600 mol of PCl5 is placed in a 2.00 L flask. PCl5(g) ⇌ PCl3(g) + Cl2(g). At equilibrium, there is 0.200 mol of Cl2. Calculate K.
| R | PCl5 | ⇌ | PCl3 | + | Cl2 |
|---|---|---|---|---|---|
| I | |||||
| C | |||||
| E |
Show the solution
- Convert to molarity: [PCl5] = 0.600 mol ÷ 2.00 L = 0.300 M and equilibrium [Cl2] = 0.200 mol ÷ 2.00 L = 0.100 M
- Initial: PCl5 = 0.300, PCl3 = 0, Cl2 = 0
- Change: PCl5 breaks apart, all coefficients are 1. PCl5 = −x, PCl3 = +x, Cl2 = +x
- Equilibrium: PCl5 = 0.300 − x, PCl3 = x, Cl2 = x
- Solve for x: [Cl2] = x = 0.100 M
- Plug in x: [PCl5] = 0.300 − 0.100 = 0.200 M and [PCl3] = [Cl2] = 0.100 M
- K expression and substitute: K = [PCl3][Cl2] / [PCl5] = (0.100)(0.100) / (0.200) = 0.0100 / 0.200 = 0.0500
- Answer: K = 0.0500. Keep the zeros for three sig figs. K is less than 1, so reactants are favored.
- The trap: using the 0.200 mol of Cl2 as x. Moles never go in the table, so x is the molarity, 0.100 M.
Example 4: Find Equilibrium Concentrations
H2(g) + I2(g) ⇌ 2HI(g), K = 49.0. A flask starts with 0.200 M H2 and 0.200 M I2. Find all equilibrium concentrations. (Hint: take the square root of both sides.)
| R | H2 | + | I2 | ⇌ | 2HI |
|---|---|---|---|---|---|
| I | |||||
| C | |||||
| E |
Show the solution
- Initial: H2 = 0.200, I2 = 0.200, HI = 0
- Change: the reaction moves forward. H2 = −x, I2 = −x, HI = +2x (coefficient of 2)
- Equilibrium: H2 = 0.200 − x, I2 = 0.200 − x, HI = 2x. No equilibrium value is given, so use K to find x.
- K expression: K = [HI]2 / ([H2][I2]) = 49.0
- Substitute the E row: (2x)2 / (0.200 − x)2 = 49.0
- Square root both sides: 2x / (0.200 − x) = 7.00
- Solve for x: 2x = 1.40 − 7.00x, so 9.00x = 1.40, and x = 0.15556 M
- Plug in x: [H2] = [I2] = 0.200 − 0.15556 = 0.04444 ≈ 0.0444 M and [HI] = 2(0.15556) = 0.31111 ≈ 0.311 M
- Check: (0.311)2 / (0.0444)2 ≈ 49, which matches K.
- Answer: [H2] = 0.0444 M, [I2] = 0.0444 M, [HI] = 0.311 M
- The trap: rounding x too early. Keep the extra digits in your calculator and round only at the very end so rounding errors don’t pile up.
Practice
Run the Equilibrium Constant Lab
The lab opens in RICE table mode with this lesson’s N2O4 ⇌ 2NO2 problem. Fill in each row with numbers or x, and the lab checks each row as you go. No login needed.
Lesson Slides
Big Ideas
- A RICE table organizes the problem.
- The C row follows the coefficients.
- E = I + C.
- Plug the E values into K.
Back to the essential question: to find concentrations at equilibrium, set up a RICE table, use x and the coefficients to describe the change, and then use one known value or K to solve for x. Next up, we’ll look at Le Châtelier’s Principle, which tells us how an equilibrium shifts when we disturb it.
NGSS Alignment
This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:
- HS-PS1-6: Refine the design of a chemical system by specifying a change in conditions that would produce increased amounts of products at equilibrium.
- HS-PS1-7: Use mathematical representations to support the claim that atoms, and therefore mass, are conserved during a chemical reaction.
Disciplinary core ideas: PS1.B Chemical Reactions