Chemistry · Thermochemistry

Calorimetry

Essential Question

How do we measure the heat of a reaction?

In the last lesson we used q = mcΔT to find how much heat it takes to change the temperature of a substance. Calorimetry is the science of measuring heat, and it uses that same equation to measure the heat of a chemical reaction. By the end of this lesson, you should be able to tell the system from the surroundings, explain how a coffee-cup calorimeter works, decide whether a reaction is exothermic or endothermic from a temperature change, calculate qrxn and ΔH in kJ/mol, and identify a metal from its specific heat.

Video not loading? Watch it on YouTube.

System vs. Surroundings

  • System: the reaction (the chemicals)
  • Surroundings: everything else, like the water
A beaker of water with a dashed circle around four reacting particles labeled System (the reaction). Red arrows point outward from the circle into the water, which is labeled Surroundings (the water).

The system is the part we are studying, and in calorimetry the system is the reaction itself: the chemicals that are reacting. The surroundings are everything else, and in this unit that is usually the water the reaction happens in. Heat moves across the boundary between the two, like the red arrows showing the reaction giving heat to the water. We cannot put a thermometer inside a molecule, but we can put one in the water. That is the big trick of calorimetry.

Heat Lost = Heat Gained

  • Energy is conserved: never made or destroyed
A red box labeled Reaction (system), loses 500 J, q rxn = −500 J, with a heat arrow pointing to a blue box labeled Water (surroundings), gains 500 J, q soln = +500 J. Below, a yellow box shows q rxn = −q soln.

Energy is never created or destroyed. It can only move from one place to another or change form. This is the law of conservation of energy, the first big rule of thermodynamics, the study of energy and how it moves. Energy can move as heat or as work, which is energy moved by a force, like a gas pushing a piston. Almost no work is done in a coffee-cup calorimeter, so the energy moves as heat. In this unit, a system’s energy changes in three main ways: heating or cooling, phase changes, and chemical reactions, and the rule holds for all three, exothermic or endothermic. So if a reaction loses 500 J of heat, the water gains exactly 500 J: heat lost equals heat gained. Heat leaving something is negative and heat going in is positive, so the two q values have the same size but opposite signs. We write this as qrxn = −qsoln (or qsystem = −qsurroundings), and you will use it in every calorimetry problem.

The Coffee-Cup Calorimeter

  • Two foam cups: insulation that traps heat
  • Lid and stirrer: keep heat in and mix the solution
  • Thermometer: reads the starting and final temperatures
A coffee-cup calorimeter: two nested foam cups holding a solution, covered by a lid. A thermometer and a stirrer pass through the lid into the solution. Labels: Thermometer, Stirrer, Lid, Solution (reaction happens here), and Two foam cups (insulation).

A calorimeter is anything that measures heat, and a coffee-cup calorimeter is a simple one made from everyday materials. It is made of two foam cups, one nested inside the other. Foam is a great insulator, so very little heat leaks in or out, and all the heat from the reaction goes into the solution, where the water soaks it up. The lid keeps heat from escaping out the top, and the stirrer mixes everything so the temperature is the same everywhere. The thermometer gives us the starting and final temperatures, and that change, ΔT, is the key to everything.

What ΔT Tells You

  • Temperature rises: exothermic, qrxn is negative (−)
  • Temperature drops: endothermic, qrxn is positive (+)
Two panels. Left, red: a thermometer with a rising red column and an up arrow, labeled Temperature rises, Exothermic, q rxn is negative. Right, blue: a thermometer with a low blue column and a down arrow, labeled Temperature drops, Endothermic, q rxn is positive.

Remember that the thermometer sits in the water, the surroundings, not in the reaction. If the temperature rises, the water gained heat, and that heat came from the reaction. The reaction released heat, so it is exothermic and qrxn is negative. If the temperature drops, the reaction pulled heat out of the water, so it is endothermic and qrxn is positive. This feels backwards at first, so be careful: the water and the reaction always have opposite signs.

Treat the Solution Like Water

  • c = 4.18 J/g·°C, the same as water
  • Density = 1.00 g/mL, so 1 mL → 1 g
  • Use the total mass of the solution
Two beakers, each labeled 50.0 mL, are combined (plus sign and arrow) into one larger beaker labeled 100. mL → 100. g.

Most reactions in a calorimeter happen in a water solution, so we make a few assumptions to keep the math simple. A dilute solution is mostly water, so we use the specific heat of water, 4.18 J/g·°C. We also say the solution has the density of water, 1.00 g/mL, so the number of milliliters equals the number of grams. Last, use the total mass of everything in the cup: mixing 50.0 mL with 50.0 mL gives 100. g of solution, and if you dissolve a solid in water, add the mass of the solid to the mass of the water.

Calorimetry Steps

  • 1. qsoln = mcΔT, where ΔT = Tfinal − Tinitial
  • 2. qrxn = −qsoln (flip the sign)
  • 3. ΔH = qrxn ÷ mol (only if asked; use kJ/mol)
Three stacked boxes connected by down arrows: 1. q soln = mcΔT, with the note ΔT = T final − T initial; 2. q rxn = −q soln, with the note Flip the sign; 3. ΔH = q rxn ÷ mol, with the note Only if asked; use kJ/mol.

Every calorimetry problem follows the same three steps. First, find the heat for the solution with q = mcΔT, using the mass of the whole solution and ΔT = final temperature − initial temperature. Second, flip the sign, because heat lost equals heat gained: qrxn = −qsoln. Third, only when a problem asks for ΔH, the enthalpy change per mole, divide qrxn by the moles that reacted. Convert joules to kilojoules first so the answer comes out in kJ/mol.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: System or Surroundings?

A hand warmer packet gets hot when you open it. (a) What is the system? What are the surroundings? (b) Is q for the system positive or negative? (c) Is the process exothermic or endothermic?

Show the solution
  1. Find the system: the system is the reaction. Inside a hand warmer, iron powder reacts with oxygen from the air, so the reacting chemicals in the packet are the system.
  2. Find the surroundings: everything else, which here is your hands and the air around the packet.
  3. Decide which way heat flows: your hands (the surroundings) get warm, so they gain heat. That heat must come from the system, so heat flows from the packet to your hands.
  4. Give the sign of q: heat leaving the system means qsystem is negative (−).
  5. Exothermic or endothermic? The system releases heat to the surroundings. Exo means out.
  6. Answer: (a) System: the chemicals reacting in the packet; surroundings: your hands and the air. (b) qsystem is negative. (c) Exothermic.

Example 2: Mixing Water

100. g of water at 80.0 °C is mixed with 200. g of water at 20.0 °C in a calorimeter. Find the final temperature. Use c = 4.18 J/g·°C.

Show the solution
  1. Known: hot water: m = 100. g, Ti = 80.0 °C; cold water: m = 200. g, Ti = 20.0 °C; both end at the same Tf = ?
  2. Heat lost = heat gained: −qhot = qcold (the hot water’s q is negative, so the minus sign makes both sides positive)
  3. Plug in q = mcΔT: −(100. g)(4.18 J/g·°C)(Tf − 80.0 °C) = (200. g)(4.18 J/g·°C)(Tf − 20.0 °C)
  4. Cancel c: −100.(Tf − 80.0) = 200.(Tf − 20.0)
  5. Distribute: −100. Tf + 8000 = 200. Tf − 4000
  6. Solve: 8000 + 4000 = 200. Tf + 100. Tf, so 12000 = 300. Tf and Tf = 12000 ÷ 300. = 40.0 °C
  7. Check: 40.0 °C is between 20 and 80, closer to 20 because there was twice as much cold water. The hot water dropped 40 degrees and the cold water rose 20 degrees: twice the mass, half the change.
  8. Answer: Tf = 40.0 °C (three sig figs)

Example 3: Dissolving a Salt

10.0 g of NH4Cl is dissolved in 50.0 g of water at 23.0 °C in a coffee-cup calorimeter. The final temperature is 12.0 °C. Find qrxn. Is dissolving endothermic or exothermic? Use c = 4.18 J/g·°C.

Show the solution
  1. Known: m = 10.0 g + 50.0 g = 60.0 g (total mass of the solution), c = 4.18 J/g·°C, Ti = 23.0 °C, Tf = 12.0 °C
  2. Find ΔT: ΔT = Tf − Ti = 12.0 °C − 23.0 °C = −11.0 °C (keep the negative sign)
  3. Find qsoln: qsoln = (60.0 g)(4.18 J/g·°C)(−11.0 °C) = −2758.8 J, which rounds to −2760 J (grams and °C cancel)
  4. Flip the sign: qrxn = −qsoln = −(−2760 J) = +2760 J = +2.76 kJ
  5. Answer: qrxn = +2.76 kJ, endothermic (three sig figs; qrxn > 0, so dissolving NH4Cl pulls heat out of the water, which is why a cold pack feels cold)

Example 4: Neutralization

50.0 mL of 1.0 M HCl and 50.0 mL of 1.0 M NaOH, both at 21.0 °C, are mixed in a calorimeter. The temperature rises to 27.7 °C. Find ΔH in kJ per mole of water formed (0.050 mol H2O forms). Use d = 1.00 g/mL and c = 4.18 J/g·°C.

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)

Show the solution
  1. Known: V = 50.0 mL + 50.0 mL = 100. mL, so m = 100. g; Ti = 21.0 °C, Tf = 27.7 °C; n = 0.050 mol H2O
  2. Find ΔT: ΔT = 27.7 °C − 21.0 °C = 6.7 °C (two sig figs, since we subtracted to the tenths place)
  3. Find qsoln: qsoln = (100. g)(4.18 J/g·°C)(6.7 °C) = 2800.6 J (keep extra digits until the end)
  4. Flip the sign and convert to kJ: qrxn = −2800.6 J ÷ 1000 = −2.8006 kJ
  5. Formula and plug in: ΔH = qrxn ÷ mol = −2.8006 kJ ÷ 0.050 mol = −56.012 kJ/mol
  6. Answer: ΔH = −56 kJ/mol (two sig figs, from ΔT and the molarity; the negative sign means neutralization is exothermic, which matches the temperature going up)

Example 5: Identifying a Metal

A 100.0 g metal sample is heated to 99.0 °C and dropped into a calorimeter holding 50.0 g of water at 21.0 °C. The final temperature of the metal and the water is 33.1 °C. Find the specific heat of the metal and identify it. (cwater = 4.18 J/g·°C)
Metal c values (J/g·°C): aluminum 0.897, iron 0.449, copper 0.385

Show the solution
  1. Known: metal: m = 100.0 g, Ti = 99.0 °C; water: m = 50.0 g, Ti = 21.0 °C; both end at Tf = 33.1 °C
  2. Heat gained by the water: ΔT = 33.1 °C − 21.0 °C = 12.1 °C, so qwater = (50.0 g)(4.18 J/g·°C)(12.1 °C) = 2528.9 J
  3. Heat lost = heat gained: qmetal = −qwater = −2528.9 J (the metal cooled, so its q is negative)
  4. The metal’s ΔT: ΔT = 33.1 °C − 99.0 °C = −65.9 °C
  5. Formula and plug in: c = q ÷ (mΔT) = −2528.9 J ÷ [(100.0 g)(−65.9 °C)] = 0.3837 J/g·°C (the two negatives cancel)
  6. Compare: 0.384 J/g·°C is closest to copper’s 0.385
  7. Answer: c = 0.384 J/g·°C, so the metal is probably copper (three sig figs; the trap: using the water’s ΔT for the metal. Each substance has its own ΔT, but both share the same final temperature)

↑ Back to top


Practice

Run a calorimetry experiment

Drop a hot metal into water or mix HCl with NaOH, read the temperature change, and use q = mcΔT and heat lost = heat gained to find the specific heat or ΔH. No login needed.

Lab worksheet: PDF | Answer key: PDF

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Heat lost = heat gained: qrxn = −qsoln
  • Find qsoln with q = mcΔT, then flip the sign
  • T up: exothermic. T down: endothermic.
  • ΔH = qrxn ÷ mol, in kJ/mol
  • Hot metal in water: qmetal = −qwater, then c = q ÷ (mΔT)

Back to the essential question: We run the reaction in water inside a calorimeter, use q = mcΔT to find the heat the water gains or loses, and flip the sign to get the heat of the reaction, because qrxn = −qsoln. Next up: Entropy, Enthalpy & Gibbs Energy.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS3-4: Plan and conduct an investigation to provide evidence that the transfer of thermal energy when two components of different temperature are combined within a closed system results in a more uniform energy distribution among the components in the system (second law of thermodynamics).
  • HS-PS3-1: Create a computational model to calculate the change in the energy of one component in a system when the change in energy of the other component(s) and energy flows in and out of the system are known.

Disciplinary core ideas: PS3.B Conservation of Energy and Energy Transfer; PS3.D Energy in Chemical Processes

↑ Back to top