In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Reaction Energy Lab (activity)
Essential Question
How can we find ΔH without a lab?
So far in this unit, we found heat by measuring temperature changes, like in calorimetry. But some reactions are too dangerous, too slow, or too hot to run safely, so chemists calculate ΔH from a table of numbers instead. By the end of this lesson, you should be able to define the standard heat of formation, explain why elements in their standard states have a value of zero, and use products minus reactants to calculate ΔH°rxn.
Video not loading? Watch it on YouTube.
What Is ΔH°f?
- ΔH°f: energy change to form 1 mol of a compound
- Made from its elements in their standard states

The symbol ΔH°f is read “delta H naught f,” or standard heat of formation (also called the standard enthalpy of formation). It is the energy change when exactly one mole of a compound forms from its elements, with each element in its standard state. For example, solid carbon and oxygen gas combine to make exactly 1 mol of CO2 gas, and ΔH°f for CO2 is −393.5 kJ/mol. The negative sign means energy is released when CO2 forms, so forming CO2 is exothermic.
Standard Conditions
- ° means standard: 25 °C and 1 atm
- Standard state: an element’s form at those conditions

The little circle in ΔH° means standard conditions: 25 °C and 1 atm of pressure, which is about room temperature and normal air pressure. A ΔH measured at those conditions is the standard enthalpy change, ΔH°. An element’s standard state is simply the form it takes under those conditions. Oxygen, hydrogen, and nitrogen are gases that come in pairs, so we write O2, H2, and N2. Carbon’s standard form is solid graphite (like pencil lead) and iron is a solid, while only two elements are liquids at room temperature: mercury and bromine, which is also diatomic (Br2).
Elements Have ΔH°f = 0
- Already in standard state: nothing to form

An element in its standard state has a heat of formation of zero. Heat of formation is the energy to form a substance from its elements, and if you already have the element in its standard state, there is nothing to form. Be careful, though, because it must be the exact standard form. Ozone (O3) and single oxygen atoms (O) are made of oxygen but are not its standard form, O2, and water is a compound, so none of these are zero. When you see O2, H2, N2, or a solid metal in a reaction, you can write zero right away.
Reading a ΔH°f Table
- Units: kJ/mol
- State matters!

Scientists have already measured heats of formation for thousands of compounds and listed them in tables like this one. The units are kJ/mol, so each value is the energy for one mole. Most values are negative, meaning forming most compounds releases energy, but a few are positive, like NO at +90.3 kJ/mol. Look at the two highlighted rows: liquid water is −285.8 kJ/mol, but water vapor is −241.8 kJ/mol. Always check the state symbol in the equation before you pick a number from the table.
The Formula
- Products minus reactants
- n = coefficient in the balanced equation

This formula says that ΔH for a reaction equals the sum of n times ΔH°f for the products, minus the sum of n times ΔH°f for the reactants. The Greek letter Σ (sigma) means “add them all up,” and n is the coefficient from the balanced equation, the big number in front of each formula. If the pattern looks familiar, it should: you used products minus reactants to find ΔS° in the last lesson, and this is the same idea with heats of formation.
Why Products Minus Reactants?
- Undo reactants: − Σ reactants
- Form products: + Σ products

Think of the reaction as a trip with two legs, with the elements (ΔH°f = 0) as the starting line. In leg one, the blue arrow, we imagine taking the reactants apart into their elements. That is the formation reaction run backward, so we flip its sign, which gives the minus reactants part. In leg two, the red arrow, we build the products from those same elements, which is just the heat of formation of the products. Adding the two legs gives the dashed arrow, ΔH°rxn, and because the energy change is the same no matter which path we imagine, this idea will be the key to the next lesson.
Step by Step
- Balance the equation
- Multiply each ΔH°f by n
- Products − reactants

First, balance the equation, because the coefficients are part of the math. Second, look up ΔH°f for every substance (check the state symbols, and give elements in their standard state a zero), then multiply each value by its coefficient. For example, 2 mol Fe2O3(s) × (−824.2 kJ/mol) = −1648.4 kJ, because the moles cancel. Third, add up the products, add up the reactants, and subtract. Always put negative numbers in parentheses, since subtracting a negative is where most mistakes happen.
Negative or Positive?
- ΔH°rxn negative: exothermic
- ΔH°rxn positive: endothermic

Once you have an answer, its sign tells a story, just like the potential energy diagrams from earlier in this unit. If ΔH°rxn is negative, the products have less potential energy than the reactants, and the extra energy was released as heat, so the reaction is exothermic. If ΔH°rxn is positive, the products have more potential energy, so energy had to be absorbed from the surroundings, and the reaction is endothermic. Always write a plus sign on positive answers so nobody wonders.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Burning Methane
Methane, CH4, is natural gas. Use the data below to calculate ΔH°rxn for this reaction.
CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)
| Substance | CH4(g) | O2(g) | CO2(g) | H2O(l) |
|---|---|---|---|---|
| ΔH°f (kJ/mol) | −74.8 | 0 | −393.5 | −285.8 |
Show the solution
- Check: the equation is balanced (C: 1 = 1, H: 4 = 4, O: 4 = 4). O2 is an element, so its ΔH°f is 0, and the water is liquid, so use −285.8 kJ/mol.
- Products: Σ products = (1 mol)(−393.5 kJ/mol) + (2 mol)(−285.8 kJ/mol) = −393.5 kJ + (−571.6 kJ) = −965.1 kJ (moles cancel)
- Reactants: Σ reactants = (1 mol)(−74.8 kJ/mol) + (2 mol)(0 kJ/mol) = −74.8 kJ
- Products minus reactants: ΔH°rxn = (−965.1 kJ) − (−74.8 kJ) = −965.1 kJ + 74.8 kJ
- Answer: ΔH°rxn = −890.3 kJ (tenths place, the fewest decimal places in the data). It is negative, so burning methane is exothermic.
Example 2: Burning Propane
Propane, C3H8, is the fuel in a gas grill tank. Use the data below to calculate ΔH°rxn for this reaction.
C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(g)
| Substance | C3H8(g) | O2(g) | CO2(g) | H2O(g) |
|---|---|---|---|---|
| ΔH°f (kJ/mol) | −103.8 | 0 | −393.5 | −241.8 |
Show the solution
- Check: the equation is balanced (C: 3 = 3, H: 8 = 8, O: 10 = 6 + 4). The water is a gas, so use −241.8 kJ/mol, not −285.8 kJ/mol. O2 is an element, so its ΔH°f is 0.
- Products: Σ products = (3 mol)(−393.5 kJ/mol) + (4 mol)(−241.8 kJ/mol) = −1180.5 kJ + (−967.2 kJ) = −2147.7 kJ (moles cancel)
- Reactants: Σ reactants = (1 mol)(−103.8 kJ/mol) + (5 mol)(0 kJ/mol) = −103.8 kJ
- Products minus reactants: ΔH°rxn = (−2147.7 kJ) − (−103.8 kJ) = −2147.7 kJ + 103.8 kJ
- Answer: ΔH°rxn = −2043.9 kJ (tenths place). It is negative, so burning propane is exothermic.
Example 3: Making Lime
Heating limestone, CaCO3, breaks it down into lime, CaO, and carbon dioxide. Use the data below to calculate ΔH°rxn. Is the reaction exothermic or endothermic?
CaCO3(s) → CaO(s) + CO2(g)
| Substance | CaCO3(s) | CaO(s) | CO2(g) |
|---|---|---|---|
| ΔH°f (kJ/mol) | −1206.9 | −635.1 | −393.5 |
Show the solution
- Check: the equation is balanced (Ca: 1 = 1, C: 1 = 1, O: 3 = 1 + 2) and every coefficient is 1. There are no elements, so nothing is zero.
- Products: Σ products = (1 mol)(−635.1 kJ/mol) + (1 mol)(−393.5 kJ/mol) = −1028.6 kJ (moles cancel)
- Reactants: Σ reactants = (1 mol)(−1206.9 kJ/mol) = −1206.9 kJ
- Products minus reactants: ΔH°rxn = (−1028.6 kJ) − (−1206.9 kJ) = −1028.6 kJ + 1206.9 kJ
- Answer: ΔH°rxn = +178.3 kJ, endothermic. A positive value means the reaction absorbs energy, which is why limestone must be heated in a very hot oven called a kiln.
Example 4: Smog Formation
Car engines make NO, which reacts with oxygen in the air to form brown NO2 gas in smog. Use the data below to calculate ΔH°rxn for this reaction.
2NO(g) + O2(g) → 2NO2(g)
| Substance | NO(g) | O2(g) | NO2(g) |
|---|---|---|---|
| ΔH°f (kJ/mol) | +90.3 | 0 | +33.2 |
Show the solution
- Check: the equation is balanced (N: 2 = 2, O: 2 + 2 = 4). O2 is an element in its standard state, so its ΔH°f is 0.
- Products: Σ products = (2 mol)(+33.2 kJ/mol) = +66.4 kJ (moles cancel)
- Reactants: Σ reactants = (2 mol)(+90.3 kJ/mol) + (1 mol)(0 kJ/mol) = +180.6 kJ
- Products minus reactants: ΔH°rxn = (+66.4 kJ) − (+180.6 kJ)
- Answer: ΔH°rxn = −114.2 kJ (tenths place), exothermic. Both nitrogen compounds have positive values, but the sign of the answer comes from the subtraction, not from the signs in the table.
Practice
- Heat of Formation Calculations Practice Worksheet (PDF)
- Heat of Formation Calculations Practice Answer Key (PDF)
Run the Reaction Energy Lab
The lab opens in Heat of Formation with CH4 combustion. Multiply by the coefficients and subtract reactants from products. No login needed.
Lesson Slides
Big Ideas
- ΔH°f: energy to form 1 mol from its elements
- Elements in standard state: ΔH°f = 0
- ΔH°rxn = Σ products − Σ reactants
- Negative = exothermic, positive = endothermic
Back to the essential question: We can find ΔH without a lab by looking up standard heats of formation and using products minus reactants, multiplying each value by its coefficient. Next up: Hess’s Law.
NGSS Alignment
This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:
- HS-PS1-4: Develop a model to illustrate that the release or absorption of energy from a chemical reaction system depends upon the changes in total bond energy.
Disciplinary core ideas: PS1.B Chemical Reactions