In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Calorimetry & Enthalpy Lab (activity)
Essential Question
How do we calculate heat?
In the last lesson, potential energy diagrams showed whether a reaction releases or absorbs energy. Now we put numbers on that energy using one equation and a property called specific heat. By the end of this lesson, you should be able to explain the difference between heat and temperature, use specific heat, and solve q = mcΔT for heat, mass, specific heat, or temperature.
Video not loading? Watch it on YouTube.
Heat vs. Temperature
- Heat (q): energy transferred from hot to cold
- Temperature: average kinetic energy of particles

People often use heat and temperature as if they mean the same thing, but in chemistry they are different. Heat, written with the letter q and measured in joules, is energy that moves from a hotter object to a colder one. Temperature measures the average kinetic energy of the particles, which tells us how fast they are moving on average. The total energy of motion of all the particles in a sample is its thermal energy, so a big sample holds more thermal energy than a small one at the same temperature. The cup and the pot are both at 80 °C, so their particles move at the same average speed, but the pot has far more water and can give off much more heat as it cools. Same temperature, different amounts of heat, so mass will show up in our equation.
Specific Heat Capacity (c)
- c: energy to raise 1 g by 1 °C
- Units: J/g·°C
- Water’s c is high
- High c: heats up slowly. Low c: heats up fast.
| Substance | c (J/g·°C) |
|---|---|
| Water | 4.18 |
| Aluminum | 0.897 |
| Iron | 0.449 |
| Copper | 0.385 |
On a sunny day at the beach, the metal on a car gets burning hot while the ocean stays cool, because different substances heat up at different rates. Specific heat (c) is the energy it takes to raise the temperature of 1 gram of a substance by 1 °C, which is why its units are J/g·°C: joules of energy, for each gram, for each degree. Water’s specific heat is 4.18, about ten times bigger than copper’s 0.385, so water heats up slowly and cools down slowly while metals heat up fast. You will use 4.18 for water a lot, so memorize it.
The Heat Equation
- q = heat (J)
- m = mass (g)
- c = specific heat (J/g·°C)
- ΔT = Tfinal − Tinitial (°C)

The amount of heat depends on three things: how much stuff you have, what it is made of, and how much its temperature changes. Put together, that gives the heat equation q = mcΔT, which some students remember as “q equals em-cat.” The Greek letter Δ means “change in,” and a change is always final minus initial, even when the temperature goes down. Notice how the units work out: grams cancel grams, degrees cancel degrees, and we are left with joules, exactly what heat should be measured in.
The Sign of q
- +q: heat absorbed, endothermic, temperature goes up
- −q: heat released, exothermic, temperature goes down

The sign of q tells us which way the heat is flowing. When a substance absorbs heat, like water warming on a stove, q is positive, the process is endothermic, and its temperature goes up. When a substance releases heat, like a cup of hot cocoa cooling on the counter, q is negative, the process is exothermic, and its temperature goes down. You do not have to guess the sign: if you always use final minus initial for ΔT, the math gives you the right sign automatically.
Joules and Kilojoules
- 1 kJ = 1000 J
- J → kJ: ÷ 1000
- kJ → J: × 1000
- q = mcΔT gives an answer in joules

Heat values get big fast, so we often use kilojoules, where the prefix kilo means one thousand. To go from joules to kilojoules, divide by 1000 by moving the decimal three places to the left, so 4500 J is 4.5 kJ. To go from kilojoules to joules, multiply by 1000 by moving the decimal three places to the right, so 1.25 kJ is 1250 J. Because specific heat values are in J/g·°C, q = mcΔT always gives joules, so convert any heat given in kilojoules to joules before you plug it in.
Rearranging q = mcΔT
- Divide both sides by the letters you do not want
- Then: Tfinal = Tinitial + ΔT

When a problem gives you the heat and asks for something else, rearrange the equation. To solve for mass, divide both sides by cΔT, which leaves m = q ÷ cΔT; the same trick gives c = q ÷ mΔT and ΔT = q ÷ mc. Whatever you want, keep it, and whatever you do not want, divide it away. If a problem asks for a final temperature, solve for ΔT first and then add it to the starting temperature. If the substance released heat, ΔT is negative, so the final temperature comes out lower.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Heating Water
How much heat is needed to heat 250. g of water from 22.0 °C to 85.0 °C? (cwater = 4.18 J/g·°C)
Show the solution
- Known: m = 250. g, c = 4.18 J/g·°C, Ti = 22.0 °C, Tf = 85.0 °C, q = ? (the water is heated, so expect q to be positive)
- Find ΔT: ΔT = Tf − Ti = 85.0 °C − 22.0 °C = 63.0 °C
- Formula: q = mcΔT
- Plug in: q = (250. g)(4.18 J/g·°C)(63.0 °C) = 65,835 J (grams and °C cancel, leaving joules)
- Round: each value has three sig figs, so 65,835 J rounds to 6.58 × 104 J
- Answer: q = 6.58 × 104 J = 65.8 kJ (positive, because the water absorbed heat)
Example 2: Finding Specific Heat
A 30.0 g metal sample absorbs 845 J of heat and warms from 21.0 °C to 83.5 °C. What is its specific heat?
| Metal | c (J/g·°C) |
|---|---|
| Aluminum | 0.897 |
| Iron | 0.449 |
| Copper | 0.385 |
Show the solution
- Known: m = 30.0 g, q = +845 J, Ti = 21.0 °C, Tf = 83.5 °C, c = ? (the metal absorbs heat, so q is positive)
- Find ΔT: ΔT = 83.5 °C − 21.0 °C = 62.5 °C
- Formula: c = q ÷ (mΔT)
- Plug in: c = 845 J ÷ [(30.0 g)(62.5 °C)] = 845 J ÷ 1875 g·°C = 0.4507 J/g·°C
- Round: all three given values have three sig figs, so c = 0.451 J/g·°C
- Compare: 0.451 is very close to iron’s 0.449, so the metal is probably iron
- Answer: c = 0.451 J/g·°C (probably iron)
Example 3: Finding Final Temperature
500. g of water at 90.0 °C releases 25.1 kJ of heat. What is its final temperature? (cwater = 4.18 J/g·°C)
Show the solution
- Known: m = 500. g, c = 4.18 J/g·°C, Ti = 90.0 °C, q = −25.1 kJ, Tf = ? (the water releases heat, so q is negative)
- Convert kJ to J: q = −25.1 kJ × 1000 = −25,100 J
- Formula: ΔT = q ÷ (mc)
- Plug in: ΔT = −25,100 J ÷ [(500. g)(4.18 J/g·°C)] = −25,100 J ÷ 2090 J/°C = −12.0 °C (joules and grams cancel, leaving °C)
- Final temperature: Tf = Ti + ΔT = 90.0 °C + (−12.0 °C) = 78.0 °C
- Answer: Tf = 78.0 °C (lower than 90.0 °C, which makes sense because the water released heat)
Example 4: Finding Mass
What mass of water can be heated from 20.0 °C to 50.0 °C by 7.52 kJ of heat? (cwater = 4.18 J/g·°C)
Show the solution
- Known: Ti = 20.0 °C, Tf = 50.0 °C, q = +7.52 kJ, c = 4.18 J/g·°C, m = ? (the water absorbs heat, so q is positive)
- Convert and find ΔT: q = 7.52 kJ × 1000 = 7520 J; ΔT = 50.0 °C − 20.0 °C = 30.0 °C
- Formula: m = q ÷ (cΔT)
- Plug in: m = 7520 J ÷ [(4.18 J/g·°C)(30.0 °C)] = 7520 J ÷ 125.4 J/g = 59.97 g (°C and joules cancel, leaving grams)
- Round: three sig figs, so 59.97 g rounds to 60.0 g (the .0 shows three sig figs)
- Answer: m = 60.0 g of water
Practice
Practice q = mcΔT in a calorimeter
Drop a hot copper, aluminum, or iron sample into water, read the temperature change, and use q = mcΔT to find the heat gained by the water and the specific heat of the metal. No login needed.
Lesson Slides
Big Ideas
- Heat (q) moves energy; temperature is average KE
- q = mcΔT, with ΔT = Tfinal − Tinitial
- +q: absorbed, T up. −q: released, T down
- Use joules: 1 kJ = 1000 J
Back to the essential question: We calculate heat with q = mcΔT, multiplying the mass by the specific heat and the change in temperature (final minus initial), and the sign of q tells us whether heat was absorbed or released. Next up: Calorimetry.
NGSS Alignment
This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:
- HS-PS3-1: Create a computational model to calculate the change in the energy of one component in a system when the change in energy of the other component(s) and energy flows in and out of the system are known.
- HS-PS3-4: Plan and conduct an investigation to provide evidence that the transfer of thermal energy when two components of different temperature are combined within a closed system results in a more uniform energy distribution among the components in the system (second law of thermodynamics).
Disciplinary core ideas: PS3.A Definitions of Energy; PS3.B Conservation of Energy and Energy Transfer