In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Kinetics and Collision Theory Sandbox (activity)
- AP Chemistry Unit 5 Practice (activity)
Essential Question
How does changing concentration change the rate?
In Topic 5.1 you saw that more concentrated reactants usually react faster. In this topic you will find out exactly how much faster, using an equation called a rate law.
Video not loading? Watch it on YouTube.
The Rate Law
- A rate law shows how the rate depends on reactant concentrations.
- k is the rate constant: each reaction has its own k, and it stays the same at a given temperature.
- The exponents m and n are the orders.
- Orders come from experimental data, not from the coefficients in the balanced equation.
rate = k[A]m[B]n
The orders tell you how sensitive the rate is to each reactant. This is a common place to lose points: never copy the coefficients of an overall reaction into the rate law.
What Order Means
The order tells you what happens to the rate when you change a concentration. The rule: the rate changes by (the factor you change the concentration by) raised to the order.
| Order in A | If [A] doubles, rate changes by | Why |
|---|---|---|
| 0 | × 1 (no change) | 20 = 1 |
| 1 | × 2 | 21 = 2 |
| 2 | × 4 | 22 = 4 |
For example, tripling [A] in a reaction that is second order in A makes the rate 32 = 9 times faster.
Overall Order
- Each reactant has its own order.
- The overall order is the sum of all the orders.
- No exponent written means the exponent is 1.
![Rate = k[NO]^2[H2]. Cards show order 2 in NO plus order 1 in H2 equals overall order 3.](https://i0.wp.com/zornscience.org/wp-content/uploads/2026/10/5-2-introduction-to-rate-law-04.png?resize=1200%2C371&ssl=1)
In rate = k[NO]2[H2], the reaction is second order in NO and first order in H2, so it is 2 + 1 = 3, third order overall. The overall order decides the units of k.
Measuring Concentration
You cannot count particles directly, so you measure something that changes along with concentration, over and over as the reaction runs:
- Color: absorbance from a spectrophotometer (Beer’s law, A = εbc).
- Gas pressure: when the moles of gas change (P ∝ n).
- Conductivity: when ions are made or used up.
Method of Initial Rates
Run the same reaction several times with different starting concentrations, and measure the rate right at the beginning of each trial.
![Three steps with arrows: 1, pick two trials where only [A] changes; 2, find how many times [A] and the rate changed; 3, solve (factor) to the m equals rate change.](https://i0.wp.com/zornscience.org/wp-content/uploads/2026/10/5-2-introduction-to-rate-law-06.png?resize=1200%2C300&ssl=1)
Example: if [A] doubles and the rate goes up 4 times, then 2m = 4, so m = 2. Then repeat for the next reactant.
The Rate Constant, k
- k does not change when you change concentrations.
- k is larger at higher temperature, so the reaction is faster.
- The units of k depend on the overall order, because rate is always in M/s.
| Overall order | Units of k |
|---|---|
| 0 | M/s |
| 1 | s−1 |
| 2 | M−1 s−1 |
| 3 | M−2 s−1 |
You can memorize the table or solve for the units each time. For a second-order reaction: M/s = k(M2), so k has units of M−1 s−1.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Finding Orders
Use the data below for the reaction A + B → C. Find the order in A, the order in B, and the rate law.
| Trial | [A] (M) | [B] (M) | Initial rate (M/s) |
|---|---|---|---|
| 1 | 0.10 | 0.10 | 2.0 × 10−3 |
| 2 | 0.20 | 0.10 | 8.0 × 10−3 |
| 3 | 0.10 | 0.20 | 4.0 × 10−3 |
Show the solution
- Pick trials for A: In trials 1 and 2, [B] stays 0.10 M and [A] doubles from 0.10 M to 0.20 M (× 2).
- Compare the rates: (8.0 × 10−3) ÷ (2.0 × 10−3) = 4, so the rate went up 4 times.
- Solve for m: 2m = 4, so m = 2. Second order in A.
- Repeat for B: In trials 1 and 3, [A] stays the same and [B] doubles. The rate goes from 2.0 to 4.0 × 10−3 M/s (× 2). 2n = 2, so n = 1. First order in B.
- Write the rate law: rate = k[A]2[B], third order overall. The coefficients of A and B are both 1, but the order in A is 2, which is why orders must come from data.
Example 2: Calculating k
For rate = k[A]2[B], trial 1 has [A] = 0.10 M, [B] = 0.10 M, and rate = 2.0 × 10−3 M/s. Calculate k with units.
Show the solution
- Rearrange: k = rate / ([A]2[B]).
- Plug in: k = (2.0 × 10−3 M/s) / ((0.10 M)2(0.10 M)). Remember to square [A].
- Work out the bottom: (0.10)2(0.10) = 1.0 × 10−3 M3.
- Divide the numbers: (2.0 × 10−3) ÷ (1.0 × 10−3) = 2.0.
- Divide the units: (M/s) ÷ M3 = M−2 s−1, which matches the table for third order.
- Answer: k = 2.0 M−2 s−1
Example 3: Predicting a Change in Rate
The rate law is rate = k[X][Y]2. What happens to the rate if [X] is doubled and [Y] is tripled at the same time?
Show the solution
- Effect of X: First order, so doubling X multiplies the rate by 21 = 2.
- Effect of Y: Second order, so tripling Y multiplies the rate by 32 = 9.
- Combine: When two changes happen at once, multiply the factors: 2 × 9 = 18.
- Answer: The rate increases by a factor of 18. k does not change, because the temperature did not change.
Practice
- 5.2 Introduction to Rate Law Practice Worksheet (PDF)
- 5.2 Introduction to Rate Law Practice Answer Key (PDF)
Practice with the Kinetics and Collision Theory Sandbox
Watch particles collide, change the temperature, the concentration and the activation energy, add a catalyst, and see why only some collisions lead to a reaction.
Practice with instant feedback
Answer original AP-style questions for Unit 5 and see an explanation right after each one. Choose Topic 5.2 or mix topics. No login needed.
Lesson Slides
Big Ideas
- A rate law has the form rate = k[A]m[B]n.
- Orders come from experimental data, not from coefficients.
- Changing a concentration changes the rate by the factor raised to the order.
- The units of k depend on the overall order.
Back to the essential question: The order tells you. Zero order: no change. First order: the rate changes by the same factor. Second order: the rate changes by the factor squared. Next up, Topic 5.3 Concentration Changes Over Time, where you will use graphs to find the order.
AP Alignment
This lesson covers Topic 5.2, Introduction to Rate Law, in Unit 5 (Kinetics) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 5.2.A: Represent experimental data with a consistent rate law expression.
Essential knowledge: 5.2.A.1, 5.2.A.2, 5.2.A.3, 5.2.A.4, 5.2.A.5
Suggested skill: 5.C Mathematical Routines. Explain the relationship between variables within an equation when one variable changes.