AP Chemistry · Unit 6: Thermochemistry

6.1 Endothermic and Exothermic Processes

Essential Question

How can we tell if a process releases or absorbs energy?

Every change you have ever seen, like ice melting, a candle burning, or sugar dissolving, comes with an energy change. By the end of this lesson, you should be able to use a temperature change to decide which way the energy is flowing.

Video not loading? Watch it on YouTube.

System and Surroundings

  • The system is the chemicals we are studying.
  • The surroundings are everything else: the water, the beaker, the air, even your hand.
  • Energy moves between the system and the surroundings. It is never created or destroyed, it just crosses the boundary.
A circle labeled System holding green particles, inside a box labeled Surroundings, with a two-headed red arrow labeled energy between them. Caption: system plus surroundings equals universe.

Exothermic Processes

  • The system releases energy (think “exo” = exit).
  • The surroundings get warmer, so the thermometer reading goes up.
  • The container feels hot. Examples: a campfire, a hand warmer, burning natural gas.
A pink circle labeled System with four red arrows pointing outward, labeled heat, next to a thermometer reading high. Caption: energy flows out of the system.

Endothermic Processes

  • The system absorbs energy (think “endo” = enter).
  • The surroundings get cooler, so the thermometer reading goes down.
  • The container feels cold. Examples: ice melting, a cold pack, cooking an egg.
A light blue circle labeled System with four blue arrows pointing inward, labeled heat, next to a thermometer reading low. Caption: energy flows into the system.

Common mistake: cold does not flow into your hand. Energy flows out of your hand and into the system, and that is what feels cold.

Temperature Is the Clue

The thermometer sits in the surroundings, usually the water the process happens in.

  • Temperature goes up: the surroundings gained energy, so the system released it. Exothermic.
  • Temperature goes down: the surroundings lost energy, so the system absorbed it. Endothermic.

This trips up a lot of students. A temperature increase does not mean the system gained energy. It means the system lost energy to the surroundings.

Three Ways Energy Changes

  • Heating and cooling: the temperature of a substance changes (Topics 6.3 and 6.4).
  • Phase changes: melting, boiling, freezing, and condensing (Topic 6.5).
  • Chemical reactions: bonds break and new bonds form (Topics 6.6 to 6.9).

Each of these can be endothermic or exothermic, depending on the direction.

Phase Changes and Energy

  • Melting and boiling absorb energy (endothermic). Pulling particles apart means overcoming the attractions between them.
  • Freezing and condensing release energy (exothermic). When particles come together, attractions form and energy is released.
Particle boxes for solid, liquid, and gas. Red arrows on top for melting and boiling are labeled endothermic, absorbs energy. Blue arrows below for freezing and condensing are labeled exothermic, releases energy.

Freezing is exothermic, even though ice is cold. Exothermic describes the direction energy flows, not whether something feels hot.

Dissolving Can Go Either Way

  1. Break old attractions between solute particles and between solvent molecules. This absorbs energy.
  2. Form new attractions between the solute and the solvent. This releases energy.
  • More energy released than absorbed: dissolving is exothermic.
  • More energy absorbed than released: dissolving is endothermic.

Hot Packs and Cold Packs

Instant hot packs and cold packs both work by dissolving a solid in water.

Two cards. Hot pack: CaCl2 dissolves, exothermic, thermometer high, pack gets hot. Cold pack: NH4NO3 dissolves, endothermic, thermometer low, pack gets cold.
  • Hot pack (CaCl2): the new ion-water attractions release more energy than it took to separate the ions. Exothermic, so the pack warms up.
  • Cold pack (NH4NO3): breaking the old attractions takes more energy than the new attractions release. Endothermic, so the pack pulls energy from its surroundings and feels cold.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Dissolving KOH

A student dissolves solid KOH in water. The temperature of the water rises from 21.0°C to 34.5°C. Is dissolving KOH endothermic or exothermic? Justify your answer.

Show the solution
  1. Identify the system and surroundings: the system is the KOH as it dissolves. The water (and the thermometer in it) is the surroundings.
  2. Read the evidence: the water warmed up, from 21.0°C to 34.5°C.
  3. Decide the direction of energy flow: the surroundings gained energy, so the system released energy.
  4. Answer: Dissolving KOH is exothermic. Forming attractions between the ions and water released more energy than it took to separate the ions and the water molecules.

Example 2: Water on a Cold Glass

On a hot day, water droplets form on the outside of a glass of ice water. Is this process endothermic or exothermic? Which way does energy flow?

Show the solution
  1. Name the process: water vapor in the air touches the cold glass and turns into liquid. H2O(g) → H2O(l) is condensing.
  2. Think about the particles: as water molecules go from gas to liquid, they get close together and attractions form. Forming attractions releases energy.
  3. Answer: Condensing is exothermic. Energy flows from the water vapor (the system) into the glass and the ice water (the surroundings).

Example 3: A Reaction That Freezes

Solid Ba(OH)2 and solid NH4Cl are mixed in a flask. The flask becomes so cold that frost forms on the outside. Classify the reaction and describe the energy transfer between system and surroundings.

Show the solution
  1. Identify the system and surroundings: the system is the reaction inside the flask. The flask and the air around it are the surroundings.
  2. Read the evidence: the flask and the air near it got cold enough for frost to form. The surroundings lost energy.
  3. Answer: The reaction is endothermic. Energy is transferred as heat from the flask and the air into the reacting chemicals.

Bonus: the frost forming on the outside is water vapor turning into a solid, which releases energy. The reaction is endothermic, while the frost forming is exothermic. They are different systems.

↑ Back to top


Practice

Run the Reaction Energy Lab

The lab opens in System and surroundings with KOH dissolving in water. Predict exothermic or endothermic, start the process, and use the thermometer in the surroundings to check your prediction. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 6 and see an explanation right after each one. Choose Topic 6.1 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Exothermic: the system releases energy and the surroundings warm up.
  • Endothermic: the system absorbs energy and the surroundings cool down.
  • The thermometer reads the surroundings, not the system.
  • Dissolving can go either way: compare the attractions broken and formed.

Back to the essential question: watch the temperature of the surroundings. Warmer surroundings mean the system released energy (exothermic). Cooler surroundings mean the system absorbed energy (endothermic). Next up, Topic 6.2 Energy Diagrams, where you will draw these energy changes.

↑ Back to top


AP Alignment

This lesson covers Topic 6.1, Endothermic and Exothermic Processes, in Unit 6 (Thermochemistry) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 6.1.A: Explain the relationship between experimental observations and energy changes associated with a chemical or physical transformation.

Essential knowledge: 6.1.A.1, 6.1.A.2, 6.1.A.3, 6.1.A.4

Suggested skill: 6.D Argumentation. Provide reasoning to justify a claim using chemical principles or laws, or using mathematical justification.

↑ Back to top