AP Chemistry · Unit 6: Thermochemistry

6.7 Bond Enthalpies

Essential Question

Does breaking a bond release energy or absorb it?

Take a guess before you read on. A lot of students, and plenty of adults, get this one wrong. By the end of this lesson, you will know the answer and be able to use bond energies to estimate ΔH for a reaction.

Video not loading? Watch it on YouTube.

Breaking Bonds Absorbs Energy

  • Bonded atoms attract each other. Both nuclei are pulled toward the shared electrons between them.
  • To pull the atoms apart, you have to work against that attraction, and that takes energy.
  • Breaking a bond is always endothermic (+).
Top: two bonded atoms plus energy become two separate atoms, labeled breaking. Bottom: two separate atoms become a bonded pair and release energy, labeled forming.

Forming Bonds Releases Energy

  • When separated atoms come together and form a bond, they drop to a lower potential energy arrangement.
  • The extra energy is released, usually as heat.
  • Forming a bond is always exothermic (−).

The energy released when a bond forms equals the energy needed to break that same bond, with the opposite sign. Breaking 1 mol of H-H bonds takes 436 kJ, and forming 1 mol of H-H bonds releases 436 kJ.

Common mistake: energy is not “stored in bonds” and released when they break. Breaking any bond absorbs energy. When a reaction releases energy, it is because the new bonds that form are stronger than the bonds that broke. On the AP exam, saying “breaking bonds releases energy” will cost you the point.

Bond Enthalpy

  • Bond enthalpy (bond energy) is the energy needed to break 1 mol of a particular bond in the gas phase.
  • Bond enthalpies are always positive, because breaking bonds always takes energy.
  • They are averages over many different molecules, so a ΔH calculated from them is an estimate.
  • A bigger number means a stronger bond. You do not need to memorize these. A table is given on the AP exam.
BondBond enthalpy (kJ/mol)
H-H436
Cl-Cl242
H-Cl431
C-H413
O-H463
N-H391
O=O495
C=O (in CO2)799
N≡N941

More Bonds, Stronger Bonds

  • A single bond shares 1 pair of electrons, a double bond shares 2 pairs, and a triple bond shares 3 pairs.
  • More shared electrons between the nuclei means a stronger attraction, so the bond takes more energy to break.
  • Triple > double > single in strength. Stronger bonds are also shorter.
Bar graph of bond enthalpy in kJ/mol: C-C 348, C=C 614, C≡C 839.

A double bond is not twice as strong as a single bond (614 is less than 2 × 348). Always use the value for the actual bond.

ΔH = Bonds Broken − Bonds Formed

ΔH = Σ(bonds broken) − Σ(bonds formed)

  • Bonds broken are the bonds in the reactants. Breaking them takes energy in (+).
  • Bonds formed are the bonds in the products. Forming them releases energy out (−).
  • Formed releases more than broken absorbs: ΔH is negative, exothermic.
  • Broken absorbs more than formed releases: ΔH is positive, endothermic.

Watch the order: in Topic 6.8 you will use products minus reactants. Bond enthalpy is the opposite: reactants minus products, broken minus formed.

Count Every Bond

  1. Draw the Lewis structure of each molecule. CH4 has 4 C-H bonds, which you cannot see from the formula alone.
  2. Use the right bond. O2 has a double bond, so use O=O, not O-O. Lone pairs are not bonds and never count.
  3. Multiply by the coefficient. 2O2 has 2 × 1 = 2 O=O bonds. Bonds per molecule × coefficient, for every reactant and product.
Lewis structure of CH4 with four C-H bonds, and two O=O molecules. Labels: CH4 has 4 C-H; 2O2 has 2 × 1 O=O.

The Big Picture

A bond enthalpy calculation pretends the reaction happens in two steps.

  1. Break every bond in the reactants. This takes the system all the way up to separated atoms and absorbs energy (+).
  2. Form every bond in the products. This releases energy (−) as the atoms come back down.
Energy diagram: an up arrow from reactants to separated atoms labeled bonds broken (+), a longer down arrow from separated atoms to products labeled bonds formed (−), and a net ΔH less than 0 arrow from the reactant level down to products.

ΔH is the difference between the two steps. Real reactions do not break every bond first, but enthalpy only depends on the starting and ending points, so this imaginary path gives the same ΔH. That idea comes back in Hess’s law.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: H2 + Cl2

Use bond enthalpies to estimate ΔH for H2(g) + Cl2(g) → 2HCl(g).

Show the solution
  1. Draw the structures: H-H + Cl-Cl → 2 H-Cl.
  2. List the bonds: broken = 1 H-H + 1 Cl-Cl. Formed = 2 H-Cl (the coefficient is 2).
  3. Bonds broken: 436 + 242 = 678 kJ
  4. Bonds formed: 2(431) = 862 kJ
  5. Broken minus formed: ΔH = 678 − 862 = −184 kJ/molrxn
  6. Answer: ΔH ≈ −184 kJ/molrxn, exothermic. Forming two strong H-Cl bonds releases more energy than breaking the H-H and Cl-Cl bonds absorbs.

Example 2: Burning Methane

Estimate ΔH for CH4(g) + 2O2(g) → CO2(g) + 2H2O(g).

Show the solution
  1. Draw the structures: CH4 has 4 C-H. Each O2 has 1 O=O. CO2 is O=C=O, so 2 C=O. Each H2O is H-O-H, so 2 O-H.
  2. Count with coefficients: broken = 4 C-H + 2 O=O. Formed = 2 C=O + 4 O-H (2 waters × 2 O-H each).
  3. Bonds broken: 4(413) + 2(495) = 1652 + 990 = 2642 kJ
  4. Bonds formed: 2(799) + 4(463) = 1598 + 1852 = 3450 kJ
  5. Broken minus formed: ΔH = 2642 − 3450 = −808 kJ/molrxn
  6. Answer: ΔH ≈ −808 kJ/molrxn, exothermic. The measured value is about −802 kJ/molrxn. The estimate is close but not exact because bond enthalpies are averages.

Example 3: Making Ammonia

Estimate ΔH for N2(g) + 3H2(g) → 2NH3(g), the Haber process.

Show the solution
  1. Draw the structures: N≡N, H-H, and NH3 (N with 3 H, so 3 N-H bonds).
  2. Count with coefficients: broken = 1 N≡N + 3 H-H. Formed = 2 × 3 = 6 N-H.
  3. Bonds broken: 941 + 3(436) = 941 + 1308 = 2249 kJ
  4. Bonds formed: 6(391) = 2346 kJ
  5. Broken minus formed: ΔH = 2249 − 2346 = −97 kJ/molrxn
  6. Answer: ΔH ≈ −97 kJ/molrxn, slightly exothermic. The measured value is about −92 kJ/molrxn. The most common mistake is counting only 3 N-H bonds instead of 6.

↑ Back to top


Practice

Run the Reaction Energy Lab

The lab opens in Bond Enthalpies with H2 + Cl2 → 2HCl. Tally the bonds broken and formed, then find ΔH. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 6 and see an explanation right after each one. Choose Topic 6.7 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Breaking bonds always absorbs energy. Forming bonds always releases energy.
  • ΔH = Σ(bonds broken) − Σ(bonds formed).
  • Count bonds with Lewis structures, then multiply by the coefficients.
  • Answers are estimates, because bond enthalpies are averages.

Back to the essential question: breaking a bond always absorbs energy. Energy is released only when new bonds form, and a reaction is exothermic when the bonds formed release more energy than the bonds broken absorb. Next up, Topic 6.8 Enthalpy of Formation, a second way to calculate ΔH.

↑ Back to top


AP Alignment

This lesson covers Topic 6.7, Bond Enthalpies, in Unit 6 (Thermochemistry) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 6.7.A: Calculate the enthalpy change of a reaction based on the average bond energies of bonds broken and formed in the reaction.

Essential knowledge: 6.7.A.1, 6.7.A.2

Suggested skill: 5.F Mathematical Routines. Calculate, estimate, or predict an unknown quantity from known quantities by selecting and following a logical computational pathway and attending to precision (e.g., performing dimensional analysis and attending to significant figures).

↑ Back to top