AP Chemistry · Unit 6: Thermochemistry

6.5 Energy of Phase Changes

Essential Question

Why does sweat cool you off?

Phase changes take in or give off energy even when the temperature does not change. In this topic you will learn how much energy that is and why.

Video not loading? Watch it on YouTube.

Phase Changes Need Energy

  • Melting and boiling absorb energy (endothermic). The energy of the system goes up.
  • Freezing and condensing release energy (exothermic). The energy of the system goes down.
Boxes for gas, liquid, and solid stacked vertically. Red up arrows labeled melting and boiling absorb energy. Blue down arrows labeled condensing and freezing release energy.

It’s About Attractions

  • Pulling particles apart means overcoming the attractions between them. That absorbs energy.
  • When particles come together, attractions form. That releases energy.
  • These are attractions between molecules (intermolecular forces). The covalent bonds inside each water molecule do not break when water melts or boils.
Top: two attracted particles are pulled apart with plus energy, labeled pulling apart absorbs energy. Bottom: two separate particles come together with minus energy, labeled coming together releases energy.

Heating Curve

A heating curve shows what happens to the temperature of a sample (here, water) as heat is added at a constant rate.

Heating curve for water, temperature versus heat added: A solid warms, B melting (flat at 0°C), C liquid warms (the least steep slope), D boiling (a long flat at 100°C, about seven times longer than B), E gas warms.
  • Sloped parts (A, C, E): the temperature rises. One phase is warming up.
  • Flat parts (B, D): the temperature stays constant during melting (0°C) and boiling (100°C).
  • Liquid water has a higher specific heat than ice or steam, so segment C is the least steep.
  • Boiling (D) takes almost seven times more energy than melting (B), so it is much longer.

Flat Means Phase Change

  • During a phase change, the temperature stays constant.
  • The added energy goes into overcoming attractions, not into speeding particles up.
  • Average kinetic energy stays the same. The potential energy of the system increases.

Molar Enthalpies

Value for waterMeaning
ΔHfus = 6.01 kJ/molenthalpy of fusion: energy to melt 1 mol (solid → liquid)
ΔHvap = 40.7 kJ/molenthalpy of vaporization: energy to vaporize 1 mol (liquid → gas)

These values are per mole of substance.

Opposite Changes, Opposite Signs

Solid, liquid, and gas boxes in a row. Melting +6.01 and vaporizing +40.7 point right; freezing −6.01 and condensing −40.7 point left. Values in kJ/mol for water.
  • ΔHfreeze = −ΔHfus (−6.01 kJ/mol for water).
  • ΔHcond = −ΔHvap (−40.7 kJ/mol for water).
  • Same size, opposite sign. The energy absorbed going one way equals the energy released coming back.

q = nΔH

q = nΔH

SymbolMeaningUnits
qheatkJ
nmoles of substancemol
ΔHmolar enthalpy of the phase changekJ/mol

On a heating curve: sloped parts use q = mcΔT. Flat parts use q = nΔH.

Why Is Boiling Harder?

Two boxes. Melting: particles stay close together, 6.01 kJ/mol. Boiling: particles far apart, 40.7 kJ/mol.
  • Melting only loosens the attractions. The particles stay close together.
  • Boiling overcomes them completely. The particles end up far apart.
  • So ΔHvap is much larger than ΔHfus.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Melting Ice

How much heat is needed to melt 36.0 g of ice at 0°C? ΔHfus = 6.01 kJ/mol.

Show the solution
  1. Convert grams to moles: n = 36.0 g ÷ 18.02 g/mol = 1.998 mol H2O.
  2. Equation: q = nΔHfus.
  3. Substitute: q = (1.998 mol)(6.01 kJ/mol) = 12.01 kJ. Moles cancel, leaving kJ.
  4. Round: 3 significant figures, limited by 36.0 g and 6.01 kJ/mol.
  5. Answer: q = +12.0 kJ. Positive because melting absorbs energy. The temperature stays at 0°C the whole time.

Example 2: Condensing Steam

How much heat is released when 25.0 g of steam condenses to liquid water at 100°C? ΔHvap = 40.7 kJ/mol.

Show the solution
  1. Convert grams to moles: n = 25.0 g ÷ 18.02 g/mol = 1.387 mol H2O.
  2. Find the right ΔH: condensing is the reverse of vaporizing, so ΔHcond = −40.7 kJ/mol.
  3. Substitute: q = (1.387 mol)(−40.7 kJ/mol) = −56.46 kJ.
  4. Answer: q = −56.5 kJ, so 56.5 kJ of heat is released.

This is why steam burns are worse than boiling water burns: steam releases this extra energy onto your skin when it condenses, before it even starts to cool.

Example 3: Explaining the Curve

Heat is added to a sample of water at a constant rate. Why does the temperature stay constant during segment D (boiling)? Where does the energy go?

Heating curve with segments labeled A through E. B and D are flat segments, and D is much longer than B.
Show the solution
  1. Identify the segment: D is the flat part at the boiling point, where liquid turns into gas.
  2. Where the energy goes: the energy is used to overcome the intermolecular attractions between water molecules as they separate.
  3. Connect to temperature: the average kinetic energy of the molecules does not change, so the temperature stays constant.
  4. Answer: The added energy overcomes intermolecular attractions instead of speeding up the molecules. Average kinetic energy (and temperature) stays the same while the potential energy of the system increases.

↑ Back to top


Practice

Run the Reaction Energy Lab

The lab opens in Heating curve with water from −20 °C to 120 °C. Calculate q for each segment and see why the temperature stays constant during melting and boiling. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 6 and see an explanation right after each one. Choose Topic 6.5 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Melting and boiling absorb energy. Freezing and condensing release energy.
  • The temperature stays constant during a phase change.
  • For a phase change, q = nΔH.
  • Reverse the change and you flip the sign of ΔH.

Back to the essential question: sweat cools you off because evaporation is endothermic. As water evaporates from your skin, it absorbs energy from your skin to overcome the attractions between water molecules, so your skin loses energy and feels cooler. Next up, Topic 6.6 Introduction to Enthalpy of Reaction, where the energy comes from chemical reactions.

↑ Back to top


AP Alignment

This lesson covers Topic 6.5, Energy of Phase Changes, in Unit 6 (Thermochemistry) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 6.5.A: Explain changes in the heat q absorbed or released by a system undergoing a phase transition based on the amount of the substance in moles and the molar enthalpy of the phase transition.

Essential knowledge: 6.5.A.1, 6.5.A.2

Suggested skill: 1.B Models and Representations. Describe the components of and quantitative information from models and representations that illustrate both particulate-level and macroscopic-level properties.

↑ Back to top