In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- AP Chemistry Unit 2 Practice (activity)
Essential Question
How does the structure of a metal explain its properties?
Metals are shiny, they conduct electricity, and you can bend them without breaking them. By the end of this lesson, you should be able to explain those properties using a particle-level model of metals and alloys.
Video not loading? Watch it on YouTube.
Metallic Bonding
- Metal cations are packed in a regular, repeating array.
- Valence electrons are delocalized: they are not stuck to any one atom.
- This “sea of electrons” surrounds the cations and moves freely through the whole metal.

Metals have low ionization energies, so metal atoms give up their valence electrons easily. The metallic bond is the Coulombic attraction between the positive cations and the negative sea of electrons. Unlike a covalent bond, it is not between specific pairs of atoms. It is spread through the whole solid.
Strength of Metallic Bonding
- More valence electrons → stronger bonding
- Smaller cations → stronger bonding
- Stronger bonding → higher melting point

Sodium (group 1) adds one electron per atom to the sea and forms Na+. Magnesium (group 2) adds two electrons per atom and forms Mg2+, which is also smaller. By Coulomb’s law, a greater charge and a smaller distance both make the attraction stronger. That’s why magnesium melts at 650 °C, while sodium melts at only 98 °C.
Exam tip: to compare melting points of metals, look at the number of valence electrons (the cation’s charge) and the size of the cation.
Electrical Conductivity
- Delocalized electrons are free to move.
- A voltage pushes the electrons through the metal toward the positive terminal. Moving charge is an electric current.
- The same mobile electrons carry energy quickly, so metals are also good conductors of heat.

Rule to remember: to conduct electricity, a substance needs charged particles that are free to move. In a metal, those particles are the electrons.
Malleable and Ductile
- Malleable: can be hammered into thin sheets (aluminum foil)
- Ductile: can be pulled into wires (copper wire)
- Layers of cations can slide past each other, and the electron sea keeps them bonded.

After the top layer slides, its cations are still surrounded by the sea of electrons, because the electrons move right along with them. Metallic bonding is nondirectional, so the metal bends instead of breaking.
Why Ionic Solids Shatter
- In an ionic solid like NaCl, positive and negative ions alternate.
- Shift a layer by one ion, and like charges line up and repel.
- The crystal cracks instead of bending, so ionic solids are brittle.

Exam tip: metals bend because the electron sea keeps everything attracted. Ionic solids shatter because shifting the layers lines up like charges.
What Is an Alloy?
An alloy is a mixture of a metal with one or more other elements. The other element can be another metal or a nonmetal like carbon. Alloys keep their metallic character (they still conduct electricity), but some of their properties change.
- Interstitial alloys: atoms of very different sizes (example: steel)
- Substitutional alloys: atoms of similar sizes (example: brass)
Interstitial Alloys
- Form between atoms with very different radii.
- The smaller atoms fill the holes (interstices) between the larger atoms.
- Example: steel, where carbon atoms occupy holes in the iron lattice.

Iron has a radius of about 126 pm, and carbon is only about 77 pm. That big size difference lets carbon squeeze into the gaps. No iron atoms are removed. The carbon atoms are added in between.
Properties of Interstitial Alloys
- Small atoms lock the layers in place.
- Harder and stronger than the pure metal
- Less malleable and less ductile
- Denser than the pure metal

The small atoms sit between the layers and act like wedges, so the layers can’t slide easily. That’s why bridges and skyscrapers are built from steel instead of pure iron. Because the small atoms fill empty space, they add mass without really changing the volume, so the density goes up.
Substitutional Alloys
- Form between atoms of comparable radius.
- One type of atom replaces (substitutes for) the other in the lattice.
- Example: brass, where zinc atoms replace some copper atoms.

Copper has a radius of about 128 pm and zinc about 134 pm. They’re close enough that a zinc atom fits right into a copper atom’s spot. There are no extra atoms in the holes, so the lattice looks almost the same as pure copper.
Properties of Substitutional Alloys
- The slight size mismatch disrupts the layers a little.
- Harder than the pure metal
- Still malleable and ductile
- Density is between the densities of the two metals.

Because the atoms are similar in size, the layers can still slide. The small bumps from the slightly different atoms add some resistance, which is why brass is harder than pure copper.
Interstitial vs. Substitutional
| Interstitial | Substitutional | |
|---|---|---|
| Atom sizes | Very different | Similar |
| Where the added atoms go | In the holes between larger atoms | In lattice positions, replacing host atoms |
| Malleability | Much less malleable and ductile | Still malleable and ductile |
| Density | Greater than the pure metal | Between the two metals |
| Example | Steel (C in Fe) | Brass (Zn in Cu) |
Exam tip: when identifying an alloy from a particle diagram, look at the sizes and positions of the atoms. Small atoms in the gaps means interstitial. Similar atoms in the lattice positions means substitutional.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Melting Points
Calcium melts at 842 °C, but potassium melts at only 64 °C. Explain this difference using metallic bonding.
Show the solution
- Count the electrons: K is in group 1, so it adds 1 valence electron to the sea and forms K+. Ca is in group 2, so it adds 2 valence electrons and forms Ca2+.
- Compare sizes: both are in period 4, but calcium has one more proton and has lost two electrons, so Ca2+ is smaller than K+.
- Apply Coulomb’s law: a greater charge and a smaller distance both make the attraction between the cations and the electron sea stronger.
- Answer: Ca has stronger metallic bonding, so more energy is needed to separate its particles, giving it a higher melting point.
Sample exam justification: Calcium ions have a 2+ charge and are smaller than potassium ions, which have a 1+ charge. The stronger Coulombic attraction between Ca2+ ions and the delocalized electrons requires more energy to overcome, so calcium has the higher melting point.
Example 2: Identifying an Alloy
Sterling silver is made of copper atoms mixed into silver. Is sterling silver an interstitial or substitutional alloy? Justify your answer.

Show the solution
- Compare radii: Ag = 144 pm and Cu = 128 pm.
- Find the difference: 144 pm − 128 pm = 16 pm
- Percent difference: (16 pm ÷ 144 pm) × 100 ≈ 11%. Copper is only about 11% smaller than silver, so the atoms are similar in size.
- Decide where Cu goes: a copper atom is far too big to fit into the holes between silver atoms, but it is close enough in size to take a silver atom’s place.
- Answer: Substitutional. Cu and Ag have similar atomic radii, so Cu atoms replace Ag atoms in the lattice.
Exam tip: your justification must mention the atom sizes. Just writing “substitutional” won’t earn the point.
Example 3: Particle Diagrams
Which diagram best represents an interstitial alloy? Justify your choice.

Show the solution
- Diagram A: two kinds of atoms, the same size, both in regular lattice positions. That’s a substitutional alloy.
- Diagram B: large atoms make up the lattice, and much smaller atoms sit in the holes between them. That matches an interstitial alloy.
- Diagram C: only one kind of atom, so it’s a pure metal, not an alloy.
- Answer: B, because the smaller atoms occupy the spaces between the larger atoms in the lattice.
Example 4: Conductivity
Solid copper conducts electricity, but solid sodium chloride does not. Explain using particle-level structure.

Show the solution
- Requirement: conduction needs charged particles that are free to move.
- Copper: metallic bonding means its valence electrons are delocalized and can move freely through the solid.
- Sodium chloride: it has charged particles (Na+ and Cl−), but in the solid they are locked in fixed lattice positions, and there are no delocalized electrons.
- Answer: Cu has mobile delocalized electrons. Solid NaCl has ions fixed in place and no free electrons, so no charge can flow.
Bonus: if you melt sodium chloride, the ions can move, and it will conduct.
Practice
- 2.4 Structure of Metals and Alloys Practice Worksheet (PDF)
- 2.4 Structure of Metals and Alloys Practice Answer Key (PDF)
Practice with instant feedback
Answer original AP-style questions for Unit 2 and see an explanation right after each one. Choose Topic 2.4 or mix topics. No login needed.
Lesson Slides
Big Ideas
- Metals are cations in a sea of delocalized electrons.
- The electron sea explains conductivity and malleability.
- Interstitial alloys: small atoms fill the holes.
- Substitutional alloys: atoms of similar size swap places.
Back to the essential question: the mobile sea of electrons and the arrangement of the atoms explain how metals and alloys behave, from conducting electricity to bending without breaking. Next up, Topic 2.5 shows how to represent covalent molecules with Lewis diagrams.
AP Alignment
This lesson covers Topic 2.4, Structure of Metals and Alloys, in Unit 2 (Compound Structure and Properties) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 2.4.A: Represent a metallic solid and/or alloy using a model to show essential characteristics of the structure and interactions present in the substance.
Essential knowledge: 2.4.A.1, 2.4.A.2, 2.4.A.3
Suggested skill: 4.C Model Analysis. Explain the connection between particulate-level and macroscopic properties of a substance using models and representations.