AP Chemistry · Unit 2: Compound Structure and Properties

2.7 VSEPR and Hybridization

Essential Question

How do electrons determine the shape of a molecule?

A Lewis structure is flat, on paper, but real molecules are three-dimensional. By the end of this lesson, you should be able to use a Lewis structure to predict a molecule’s shape, its bond angles, whether it’s polar, and how its bonds form.

Video not loading? Watch it on YouTube.

What Is VSEPR?

VSEPR stands for Valence Shell Electron Pair Repulsion.

  • Electrons are negative, so groups of electrons around a central atom repel each other (Coulomb’s law).
  • The groups spread out as far apart as possible to minimize repulsion.
Three electron groups around a central atom. Left: the groups are crowded together with red arrows showing repulsion, labeled more repulsion. Right: the groups spread out 120 degrees apart, labeled less repulsion, more stable.

Crowded electron groups mean a lot of repulsion, which is high in energy. The arrangement with the least repulsion is the most stable, and that’s the shape the molecule actually takes. Every shape in this topic comes from this one idea.

Counting Electron Domains

An electron domain is a region around the central atom where electrons are found.

  • Each bond = 1 domain, whether it’s single, double, or triple.
  • Each lone pair on the central atom = 1 domain.
  • Count only around the central atom.
Lewis structures of HCN and NH3 with numbered electron domains. HCN: a single bond and a triple bond around carbon, labeled 2 domains. NH3: three N-H bonds and one lone pair around nitrogen, labeled 4 domains.

In HCN, carbon has a single bond to H and a triple bond to N, so it has 2 domains, not 4. All of the electrons in a multiple bond sit in the same region between the same two atoms. In NH3, nitrogen has three bonds plus one lone pair, so it has 4 domains. The lone pair on nitrogen in HCN doesn’t count, because nitrogen isn’t the central atom there.

Electron vs. Molecular Geometry

  • Electron geometry: where all of the domains point, bonds and lone pairs.
  • Molecular geometry: where the atoms are. This is the molecule’s actual shape, and it’s what the AP exam usually means by “shape.”
Two ball-and-stick models of NH3. Left: the lone pair is drawn as a yellow lobe, labeled electron geometry, tetrahedral. Right: the lone pair is a faint dashed outline, labeled molecular geometry, trigonal pyramidal.

Ammonia’s 4 domains spread out into a tetrahedral electron geometry. The lone pair still pushes on the bonds, but it isn’t an atom, so it’s left out of the shape’s name. The nitrogen sits on top of a triangle of hydrogens, so the molecular geometry is trigonal pyramidal. When the central atom has no lone pairs, the two geometries are the same.

Two and Three Electron Domains

  • 2 domains: linear, 180° (example: CO2)
  • 3 domains, 0 lone pairs: trigonal planar, 120° (example: BF3)
  • 3 domains, 1 lone pair: bent, a little less than 120° (example: SO2)
Ball-and-stick shapes. 2 domains: linear, 180 degrees, 0 lone pairs. 3 domains: trigonal planar, 120 degrees, 0 lone pairs, and bent, less than 120 degrees, 1 lone pair.

A bent molecule with 3 domains still has a trigonal planar electron geometry. Only the atoms are named, so the shape is bent, and the lone pair squeezes the bond angle below 120°.

Four Electron Domains

If four domains lay flat in a square, they would only be 90° apart. In 3D they can do better: they point to the corners of a tetrahedron, 109.5° apart.

  • 0 lone pairs: tetrahedral, 109.5° (example: CH4)
  • 1 lone pair: trigonal pyramidal, less than 109.5° (example: NH3)
  • 2 lone pairs: bent, less than 109.5° (example: H2O)
Shapes with 4 domains and tetrahedral electron geometry: tetrahedral, 109.5 degrees, 0 lone pairs; trigonal pyramidal, less than 109.5 degrees, 1 lone pair; bent, less than 109.5 degrees, 2 lone pairs.

Reading 3D drawings: a plain line is in the plane of the page, a solid wedge comes out toward you, and a dashed wedge goes back, away from you.

Exam tip: H2O and SO2 are both bent, but they have different numbers of domains. Always count the domains first, then name the shape.

Lone Pairs Take Up More Space

  • A bonding pair is shared by 2 nuclei, so it’s held in a narrow region between the atoms.
  • A lone pair is held by only 1 nucleus, so it spreads out and takes up more space.
  • Lone pairs repel more strongly and push the bonds closer together.
A lone pair drawn as a large yellow lobe on one nucleus, labeled lone pair: 1 nucleus. A bonding pair drawn as a narrow lobe between two nuclei, labeled bonding pair: 2 nuclei.
Three boxes: CH4, 109.5 degrees, 0 lone pairs; NH3, 107 degrees, 1 lone pair; H2O, 104.5 degrees, 2 lone pairs.

More lone pairs means a smaller bond angle: 109.5° for CH4, about 107° for NH3, and about 104.5° for H2O. On the AP exam, you usually just need to say the angle is less than 109.5° and explain it with lone pair repulsion.

Five Electron Domains

  • Electron geometry: trigonal bipyramidal.
  • The two axial positions point straight up and down. The three equatorial positions form a triangle around the middle.
  • Axial to equatorial is 90°, and equatorial to equatorial is 120°.
  • Lone pairs go in the equatorial positions, where there’s more room.
Shapes with 5 domains: trigonal bipyramidal (90 and 120 degrees, 0 lone pairs), seesaw (1 lone pair), T-shaped (2 lone pairs), and linear (180 degrees, 3 lone pairs). Lone pairs sit in the equatorial positions.

Examples: PCl5 is trigonal bipyramidal, TeCl4 is seesaw, ClF3 is T-shaped, and XeF2 is linear. Central atoms with more than four domains are usually in period 3 or below. You’re responsible for these shapes, but not for the orbitals behind them.

Six Electron Domains

  • 0 lone pairs: octahedral, all 90° (example: SF6)
  • 1 lone pair: square pyramidal, slightly less than 90° (example: BrF5)
  • 2 lone pairs: square planar, 90° (example: XeF4)
Shapes with 6 domains: octahedral (90 degrees, 0 lone pairs), square pyramidal (less than 90 degrees, 1 lone pair), and square planar (90 degrees, 2 lone pairs on opposite sides).

A second lone pair goes directly opposite the first one, 180° away, so the two lone pairs are as far apart as possible. That leaves four atoms in a flat square.

Molecular Polarity

  • A bond dipole arrow points toward the more electronegative atom, with a plus sign at the positive end.
  • Polar bonds + asymmetric shape → polar molecule.
  • Symmetric shape with identical outer atoms → bond dipoles cancel → nonpolar molecule.
CO2 drawn as a linear molecule with two bond dipole arrows pointing in opposite directions, labeled nonpolar, dipoles cancel. H2O drawn as a bent molecule with two bond dipoles pointing toward oxygen and a red net dipole arrow, labeled polar, dipoles add up.

CO2 has two polar C=O bonds, but it’s linear, so the two dipoles are equal and opposite and cancel. Water’s lone pairs make it bent, so both bond dipoles point partly toward the oxygen. They add up to a net dipole (the red arrow), so water is polar.

Exam tip: a quick shortcut is that lone pairs on the central atom or different outer atoms usually make a molecule polar. On the AP exam, always justify your answer with the shape and the bond dipoles, not just the shortcut.

Hybridization

  • The s and p orbitals on the central atom mix to form new, identical hybrid orbitals.
  • Hybrid orbitals point in exactly the directions VSEPR predicts.
  • Number of domains = number of hybrid orbitals.
Three cards with matching shapes: sp, 2 domains, 180 degrees, linear; sp2, 3 domains, 120 degrees, trigonal planar; sp3, 4 domains, 109.5 degrees, tetrahedral.

The name tells you which orbitals mixed: sp is 1 s + 1 p (2 orbitals), sp2 is 1 s + 2 p (3 orbitals), and sp3 is 1 s + 3 p (4 orbitals). Lone pairs count as domains, so the nitrogen in NH3 is sp3. For central atoms with 5 or 6 domains, the AP exam only asks about the shape, not the hybridization.

Sigma and Pi Bonds

  • σ (sigma) bond: orbitals overlap head-on, along the line between the two nuclei.
  • π (pi) bond: two p orbitals overlap side by side, above and below the line between the nuclei.
  • σ overlap is greater, so a σ bond is stronger than a π bond.
Top: two p orbitals overlapping head-on along the axis between two nuclei, labeled sigma. Bottom: two p orbitals side by side overlapping above and below the axis, labeled pi.

Counting σ and π Bonds

  • Single bond = 1σ
  • Double bond = 1σ + 1π
  • Triple bond = 1σ + 2π
Three cards: C-C single bond, 1 sigma; C=C double bond, 1 sigma plus 1 pi; C triple bond C, 1 sigma plus 2 pi.

Every bond between two atoms has exactly one σ bond, and any extra lines are π bonds. To count them in a molecule, count every connection between two atoms as one σ, then count each extra line in a double or triple bond as one π.

Bond Order, Length, and Energy

Bond order is the number of shared electron pairs between two atoms: 1 for a single bond, 2 for a double bond, and 3 for a triple bond.

Carbon-carbon single, double, and triple bonds drawn to scale. Bond order 1: 154 pm, 347 kJ/mol. Bond order 2: 134 pm, 614 kJ/mol. Bond order 3: 120 pm, 839 kJ/mol.
  • Higher bond order → shorter, stronger bond.
  • Larger atoms → longer bonds. For example, H–F < H–Cl < H–Br in bond length.

The carbon-carbon bonds above are drawn to scale. More shared electrons between the nuclei pull the atoms closer together and make the bond harder to break. A triple bond is not three times as strong as a single bond (839 kJ/mol, not 3 × 347 = 1041 kJ/mol), because only one of its bonds is σ. The two π bonds are weaker.

Pi Bonds Block Rotation

  • Atoms joined by only a σ bond can rotate freely around it.
  • Twisting a double bond breaks the π overlap, so a double bond is locked in place.
  • Locked double bonds → cis and trans isomers (geometric isomers).
Two structures of 1,2-dichloroethene. Cis: both Cl atoms on the same side of the C=C double bond. Trans: the Cl atoms on opposite sides. Caption: same formula, different compounds.

Both molecules are C2H2Cl2 with the same connections. In the cis isomer, the chlorines are on the same side of the double bond. In the trans isomer, they’re on opposite sides. Since the double bond can’t rotate, one can’t turn into the other, so they’re different compounds with different properties.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Shape of Formaldehyde

Formaldehyde, CH2O, has carbon as its central atom. Determine the electron geometry, molecular geometry, and bond angle around carbon.

Show the solution
  1. Count valence electrons: C = 4, H = 2 × 1 = 2, O = 6. Total = 12.
  2. Draw the Lewis structure: put C in the center with single bonds to each H and a double bond to O, then give O two lone pairs. With only single bonds, carbon would have just 6 electrons, so C and O share a double bond. Check: 4 + 4 + 4 = 12 electrons, and carbon has no lone pairs.
  3. Count domains on C: 2 single bonds + 1 double bond = 3 domains, 0 lone pairs. The double bond counts as one domain.
  4. Electron geometry: 3 domains spread into a flat triangle, so it’s trigonal planar.
  5. Molecular geometry: no lone pairs on C, so it’s the same as the electron geometry, trigonal planar.
  6. Answer: trigonal planar electron geometry, trigonal planar molecular geometry, bond angle ≈ 120°

Example 2: Sulfur Tetrafluoride

Determine the molecular geometry of SF4. Is SF4 polar or nonpolar? Justify your answer.

Show the solution
  1. Count valence electrons: S = 6, F = 4 × 7 = 28. Total = 34.
  2. Draw the skeleton: S in the center with single bonds to 4 F atoms (8 electrons). Add 3 lone pairs to each F to complete its octet (24 electrons). That’s 32 used.
  3. Place the leftovers: 34 − 32 = 2 electrons left, so they go on S as one lone pair. Sulfur is in period 3, so it can hold more than 8 electrons.
  4. Count domains on S: 4 bonds + 1 lone pair = 5 domains → trigonal bipyramidal electron geometry.
  5. Place the lone pair: it goes in an equatorial position, where there’s more room, so the molecular geometry is seesaw.
  6. Check polarity: each S–F bond is polar because F is much more electronegative than S. The lone pair makes the shape asymmetric, so the bond dipoles don’t cancel.
  7. Answer: seesaw, polar

Sample exam justification: SF4 has 5 electron domains on sulfur, including one lone pair, which gives a seesaw shape. The S–F bonds are polar, and because the seesaw shape is asymmetric, the bond dipoles do not cancel. SF4 is polar.

Example 3: Comparing Polarity

BF3 is nonpolar, but NF3 is polar. Explain this difference using electron domains and molecular geometry.

Show the solution
  1. Count valence electrons: BF3 = 3 + 3(7) = 24. NF3 = 5 + 3(7) = 26.
  2. Draw both Lewis structures: in BF3, boron makes three single bonds and has no lone pairs (boron is stable with 6 electrons). In NF3, nitrogen makes three single bonds and has 2 extra electrons, so it gets one lone pair.
  3. Count domains: BF3 has 3 domains and 0 lone pairs → trigonal planar. NF3 has 4 domains and 1 lone pair → trigonal pyramidal.
  4. BF3: the three equal B–F bond dipoles point to the corners of a flat triangle, 120° apart. They cancel, so BF3 is nonpolar.
  5. NF3: the lone pair pushes the three N–F bonds down into a pyramid. The bond dipoles all point partly in the same direction, so they don’t cancel, and NF3 is polar.
  6. Answer: the lone pair on nitrogen makes NF3 asymmetric

Sample exam justification: Both molecules have polar bonds. BF3 has no lone pairs on boron, so it is trigonal planar and its three bond dipoles cancel. NF3 has a lone pair on nitrogen, which makes it trigonal pyramidal, so its bond dipoles do not cancel and the molecule has a net dipole.

Example 4: Hybridization and Bonds

The Lewis structure of acetonitrile, CH3CN, is shown. Identify the hybridization of carbon 1 and carbon 2, then count the σ and π bonds.

Lewis structure of acetonitrile: a carbon labeled 1 bonded to three H atoms and to a carbon labeled 2, which has a triple bond to N. N has one lone pair.
Show the solution
  1. Carbon 1 domains: 3 C–H bonds + 1 C–C bond, 0 lone pairs = 4 domains.
  2. Carbon 1 hybridization: 4 domains → sp3 (tetrahedral).
  3. Carbon 2: 1 single bond + 1 triple bond, 0 lone pairs = 2 domains → sp (linear, 180°). The triple bond counts as one domain.
  4. Count σ bonds: every connection between two atoms has one σ. 3 (C–H) + 1 (C–C) + 1 (C≡N) = 5σ.
  5. Count π bonds: only the triple bond has extra lines. A triple bond is 1σ + 2π, so there are 2π.
  6. Answer: carbon 1 = sp3, carbon 2 = sp, 5 σ bonds and 2 π bonds

Example 5: Ranking Bond Lengths

Rank the carbon-oxygen bonds in CO, CO2, and CH3OH from shortest to longest. Justify your ranking.

Show the solution
  1. CO: 4 + 6 = 10 valence electrons. The only way to give both atoms an octet is a triple bond with one lone pair on each atom. Bond order = 3.
  2. CO2: 4 + 2(6) = 16 valence electrons, drawn as O=C=O. Each C=O bond order = 2.
  3. CH3OH: carbon has three H atoms and a single bond to O, and O has one H and two lone pairs. C–O bond order = 1.
  4. Apply the trend: higher bond order → shorter bond.
  5. Answer: CO < CO2 < CH3OH (shortest to longest). The measured lengths agree: about 113 pm, 116 pm, and 143 pm.

Sample exam justification: CO has a triple bond, CO2 has double bonds, and CH3OH has a single C–O bond. More shared electron pairs between carbon and oxygen means more electron density between the nuclei, which pulls the nuclei closer together and gives a shorter bond.

↑ Back to top


Practice

Practice Lewis structures and shapes

Count valence electrons, build each Lewis structure, then predict its shape, bond angle and polarity.

Practice with instant feedback

Answer original AP-style questions for Unit 2 and see an explanation right after each one. Choose Topic 2.7 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Electron domains spread out to reduce repulsion.
  • Lone pairs change the shape and shrink bond angles.
  • Domains → sp, sp2, sp3.
  • More bonds → shorter, stronger bonds.

Back to the essential question: the electron domains around a central atom, both bonds and lone pairs, spread out to minimize repulsion. That sets the electron geometry, and the positions of the atoms give the molecule its shape. From one Lewis structure, you can now predict a molecule’s shape, bond angles, polarity, and hybridization. Next up, Unit 3 begins with Topic 3.1, which uses molecular shape and polarity to explain the forces between molecules.

↑ Back to top


AP Alignment

This lesson covers Topic 2.7, VSEPR and Hybridization, in Unit 2 (Compound Structure and Properties) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 2.7.A: Based on the relationship between Lewis diagrams, VSEPR theory, bond orders, and bond polarities: i. Explain structural properties of molecules. ii. Explain electron properties of molecules.

Essential knowledge: 2.7.A.1, 2.7.A.2, 2.7.A.3, 2.7.A.4

Suggested skill: 6.C Argumentation. Support a claim with evidence from representations or models at the particulate level, such as the structure of atoms and/or molecules.

↑ Back to top