In this lesson
- Video lesson (coming soon)
- Lesson notes
- Worked examples
- Big ideas
- AP alignment
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- pH & Buffer Lab (activity)
- AP Chemistry Unit 8 Practice (activity)
Essential Question
How do we find the pH of a strong acid?
By the end of this lesson, you should be able to recognize the six strong acids and the strong bases, and calculate the pH and pOH of their solutions from concentration (and work backward from pH). This builds directly on pH, pOH, and Kw from Topic 8.1.
Video lesson coming soon. In the meantime, read through the lesson below.
Strong Acids Ionize Completely
- Every HCl gives its H+ to water
- No HCl molecules remain in solution
HCl + H2O → H3O+ + Cl−

A strong acid is an acid that ionizes completely in water. In hydrochloric acid, every HCl molecule gives its H+ to a water molecule, making H3O+ and Cl−. Notice the single arrow: the reaction goes essentially all the way to the right, so it is not treated as an equilibrium. The particle view shows H3O+ and Cl− ions in a 1:1 ratio, with no HCl molecules left at all. On the AP exam, if you are asked to draw a strong acid solution, do not draw any intact acid molecules; that is a very common way to lose a point.
The Six Strong Acids
- Memorize these six
- Assume all other acids are weak

There are only six strong acids to know for AP Chemistry: hydrochloric, hydrobromic, hydroiodic, nitric, perchloric, and sulfuric. You will be expected to recognize them on sight, so make flash cards if that helps. HCl, HBr, and HI are all hydrogen halides, but HF is missing: hydrofluoric acid is a weak acid even though it is in the same family, and that is a classic AP trick. If an acid is not one of these six, assume it is weak; acetic acid, HF, and carbonic acid are all weak. One more note: for sulfuric acid, only the first H+ comes off completely.
Hydronium = Acid Concentration
- One HNO3 → one H3O+
- So [H3O+] = [acid]

[H3O+] = [HA]0 so pH = −log[HA]0
Because a strong acid ionizes completely, the math is simple. Each HNO3 molecule makes exactly one H3O+ ion, so starting with 0.010 M nitric acid gives 0.010 M H3O+ and 0.010 M nitrate. After the reaction, the HNO3 concentration is essentially zero because it all turned into ions. Water is in large excess, so there is no need to track it. For any of the six strong acids, the H3O+ concentration equals the starting acid concentration; take the negative log to get the pH. No ICE table needed.
Strong Bases
- Group 1 and Group 2 hydroxides
- Dissociate completely into ions
- Examples: NaOH, KOH, Ca(OH)2, Ba(OH)2
NaOH(s) → Na+(aq) + OH−(aq)

The strong bases to know are the hydroxides of Group 1 and Group 2 metals, such as sodium hydroxide, potassium hydroxide, calcium hydroxide, and barium hydroxide. These are ionic compounds, so when they dissolve, they dissociate completely into their ions. Sodium hydroxide splits into Na+ and OH−, and the OH− is the part that makes the solution basic. The beaker shows only sodium ions and hydroxide ions, 1:1, with no intact NaOH units. So for a Group 1 hydroxide, the OH− concentration equals the concentration of the base.
Group 2: Two Hydroxides Each
- Each Ba(OH)2 releases two OH− ions
- [OH−] = 2 × [Ba(OH)2]

Group 2 hydroxides need one extra step. When one formula unit of Ba(OH)2 dissociates, it releases one Ba2+ ion and two hydroxide ions. So the hydroxide concentration is double the concentration of the base: a 0.010 M Ba(OH)2 solution has 0.020 M OH−. This doubling is the number one mistake on strong base problems. Before you take any log, ask: is this a Group 1 or a Group 2 hydroxide? Check the subscript after the parentheses.
Path from Concentration to pH
- Strong acid: [acid] = [H3O+], then −log gives pH
- Strong base: [base] × 1 or × 2 gives [OH−], then −log gives pOH, then 14.00 − pOH gives pH
- Group 1 hydroxide: ×1; Group 2 hydroxide: ×2
![Two flow charts. Strong acid: [acid] goes to [H3O+] (same), then to pH (-log). Strong base: [base] goes to [OH-] (times 1 or times 2), then to pOH (-log), then to pH (14.00 minus).](https://i0.wp.com/zornscience.org/wp-content/uploads/2026/10/apchem-8-2-concentration-to-ph-path.png?resize=1200%2C358&ssl=1)
This roadmap works for every problem in this topic. For a strong acid, follow the top row: the H3O+ concentration is the same as the acid concentration, then take the negative log to get pH. That is just two steps. For a strong base, follow the bottom row: find the OH− concentration (multiply by 1 for a Group 1 hydroxide or by 2 for a Group 2 hydroxide), take the negative log to get pOH, then subtract from 14.00 to get the pH at 25 °C. Another route for bases is to divide Kw by [OH−] to get [H3O+], then take the negative log; both paths give the same answer. A common mistake is stopping at pOH when the question asks for pH, so always check what is being asked.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: pH of Nitric Acid
Calculate the pH of a 0.0040 M HNO3 solution.
Show the solution
- Known: HNO3 is one of the six strong acids, so it ionizes 100%: HNO3 + H2O → H3O+ + NO3−
- Equation: [H3O+] = [HNO3] = 0.0040 M = 4.0 × 10−3 M
- Plug in: pH = −log(4.0 × 10−3)
- Calculate: pH = 2.398
- Check: Two sig figs in the concentration means two decimal places in the pH. A pH between 2 and 3 makes sense, since 4.0 × 10−3 M is between 10−2 M and 10−3 M.
- Answer: pH = 2.40
Common trap: Do not drop the final zero in 2.40; it shows your precision.
Example 2: pH of NaOH
Calculate the pH of a 0.025 M NaOH solution at 25 °C.
Show the solution
- Known: NaOH is a Group 1 hydroxide: NaOH → Na+ + OH−, so [OH−] = 0.025 M
- Equation: pOH = −log[OH−], then pH = 14.00 − pOH
- Plug in: pOH = −log(0.025) = 1.602 → 1.60 (2 sig figs, so 2 decimal places)
- Calculate: pH = 14.00 − 1.60 = 12.40
- Check: The pH is well above 7, which makes sense for a strong base.
- Answer: pH = 12.40
Common trap: Stopping at 1.60. A pH of 1.60 would mean a strong acid, so if you get a low pH for a base, go back and check.
Example 3: pH of Barium Hydroxide
Calculate the pH of a 0.0015 M Ba(OH)2 solution at 25 °C.
Show the solution
- Known: Ba(OH)2 is a Group 2 hydroxide: Ba(OH)2 → Ba2+ + 2 OH−
- Equation: [OH−] = 2 × [Ba(OH)2]
- Plug in: [OH−] = 2 × 0.0015 M = 0.0030 M (the 2 is exact, so still 2 sig figs)
- Calculate: pOH = −log(0.0030) = 2.523 → 2.52
- Calculate: pH = 14.00 − 2.52 = 11.48
- Answer: pH = 11.48
Common trap: Forgetting to double gives a pOH of 2.82 and a pH of 11.18, which is wrong. Always check for a Group 2 metal.
Example 4: HCl from pH
A solution of HCl has a pH of 2.70. What is the molar concentration of HCl in the solution?
Show the solution
- Known: pH = 2.70; HCl is a strong acid
- Equation: [H3O+] = 10−pH
- Plug in: [H3O+] = 10−2.70
- Calculate: [H3O+] = 1.995 × 10−3 M
- Check: The pH 2.70 has two decimal places, so the concentration gets two sig figs: 2.0 × 10−3 M. HCl ionized completely, so [HCl] = [H3O+].
- Answer: [HCl] = 2.0 × 10−3 M
Common trap: Typing −2.70 without the ten to the power. Use the 10x key on your calculator.
Practice
- 8.2 pH and pOH of Strong Acids and Bases Practice Worksheet (PDF)
- 8.2 pH and pOH of Strong Acids and Bases Practice Answer Key (PDF)
Run the pH & Buffer Lab
The lab opens in Explorer mode with Ba(OH)2. Check that [OH−] is double the base concentration, find pOH and pH, then compare a strong acid with a weak one. No login needed.
Practice with instant feedback
Answer original AP-style questions for Unit 8 and see an explanation right after each one. Choose Topic 8.2 or mix topics. No login needed.
Lesson Slides
Big Ideas
- Strong acids (HCl, HBr, HI, HNO3, HClO4, H2SO4): [H3O+] = [acid]
- Group 1 hydroxides: [OH−] = [base]
- Group 2 hydroxides: [OH−] = 2 × [base]
- For a strong base, find pOH first, then pH = 14.00 − pOH at 25 °C
Exam tip: Before you take any log, write the dissociation equation. It tells you whether the substance is strong, and the coefficient on OH− tells you whether to multiply by 1 or by 2.
Back to the essential question: Because a strong acid ionizes completely, [H3O+] equals the acid concentration, so the pH is just the negative log of that concentration. For a strong base, find [OH−], take the negative log to get pOH, and subtract from 14.00. Next up, Topic 8.3 shows what happens with weak acids and bases, which only ionize a little.
AP Alignment
This lesson covers Topic 8.2, pH and pOH of Strong Acids and Bases, in Unit 8 (Acids and Bases) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 8.2.A: Calculate pH and pOH based on concentrations of all species in a solution of a strong acid or a strong base.
Essential knowledge: 8.2.A.1, 8.2.A.2
Suggested skill: 5.B Mathematical Routines. Identify an appropriate theory, definition, or mathematical relationship to solve a problem.