In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Virtual Titration Simulator (activity)
- AP Chemistry Unit 8 Practice (activity)
Essential Question
How can a titration tell us what’s in a solution?
By the end of this lesson, you should be able to read a titration curve to find an unknown concentration, decide whether an acid is strong or weak, find its pKa, and count its acidic protons. This builds on Topic 4.6 and the acid-base reactions in Topic 8.4.
Video not loading? Watch it on YouTube.
Titration Setup
- Titrant: the solution of known concentration, in the buret.
- Analyte: the unknown solution, in the flask.
- Add titrant until the analyte has completely reacted.

A titration is a carefully controlled acid-base reaction. The buret holds the titrant, the solution whose concentration is known exactly. The flask holds the analyte, the solution being figured out. The buret lets you add titrant a little at a time and read exactly how many milliliters have been added. Here the titrant is NaOH, a strong base, and the analyte is HCl; base is added until it has reacted with all of the acid, and a pH meter or an indicator shows when that happens. On the AP exam, watch the wording: the titrant is what you add, and the analyte is what you are analyzing.
The Titration Curve
- A titration curve plots pH against the volume of titrant added.
- A strong acid starts near pH 1.
- There is a steep pH jump near the end.

A titration curve is a graph of pH on the y-axis against the volume of titrant added on the x-axis. This one shows 25.0 mL of 0.100 M HCl titrated with 0.100 M NaOH. At the start there is no base yet, just 0.100 M strong acid, which ionizes completely, so [H3O+] = 0.100 M and the pH is 1.00. As base is added, the pH barely moves at first because plenty of acid is still there to soak up the hydroxide. Then, right around 25 mL, the pH shoots up from about 4 to about 10 with just a couple of drops of base: that is the moment the acid runs out. After the jump, extra hydroxide piles up and the curve levels off near pH 12.5.
The Equivalence Point
- All of the analyte has reacted.
- It is at the center of the steep jump.

mol titrant = mol analyte (for a 1:1 reaction)
The equivalence point is the moment the titrant has reacted with all of the analyte: not too little, not too much. On the curve, it is the center of the steep jump, here at 25.0 mL of base. At the equivalence point, moles of titrant added equal moles of analyte, as long as they react 1:1. Moles of base = M × L = (0.100 M)(0.0250 L) = 0.00250 mol OH−, so the flask held 0.00250 mol of acid. This works for strong and weak acids alike, which is why titrations are so useful for finding an unknown concentration. For strong acid plus strong base, the solution at equivalence is just NaCl in water, so the pH is 7.00 at 25 °C. Careful: the equivalence point is about moles, not about pH 7, and it is not always neutral.
Weak Acid Titration Curve
- It starts at a higher pH than a strong acid.
- It has a flat buffer region.
- The pH at the equivalence point is above 7.

Now titrate a weak acid, 0.100 M acetic acid, with the same 0.100 M NaOH. The gray dashed curve is the strong acid for comparison. The red curve starts higher, at pH 2.87 instead of 1.00, because a weak acid only partly ionizes, so there is less H3O+ at the start. Next the curve flattens out: as soon as some base is added, acetate ions form, so the flask holds both CH3COOH and CH3COO−. That is a buffer, and buffers resist changes in pH. The equivalence point is still at 25.0 mL because there were the same moles of acid, but its pH is 8.72, above 7, and the jump is shorter. AP tip: a higher starting pH, a buffer region, and a basic equivalence point are the three signs of a weak acid.
Half-Equivalence Point
- It is halfway to the equivalence point.
- There, [HA] = [A−].
- So pH = pKa.

Ka = [H3O+][A−]/[HA] → when [HA] = [A−], Ka = [H3O+] → pH = pKa
The half-equivalence point is exactly halfway to the equivalence point. The equivalence point here is at 25.0 mL, so the half-equivalence point is at 12.5 mL. At that volume, enough base has been added to react with exactly half of the acetic acid: half is still HA and the other half has become A−, so their concentrations are equal. In the Ka expression, [HA] and [A−] cancel, leaving Ka = [H3O+], and taking the negative log of both sides gives pH = pKa. So you can read the pKa right off the graph: go to the half-equivalence volume, go up to the curve, and read the pH. For acetic acid, that is 4.74. This is a favorite AP exam question: halfway there, pH equals pKa.
pH at Equivalence
- The species left at the equivalence point set the pH.
| Titration | pH at equivalence | Why |
|---|---|---|
| Strong acid + strong base | pH = 7 | Na+ and Cl− do not react with water. |
| Weak acid + strong base | pH > 7 | A− is a weak base and makes OH−: A− + H2O ⇌ HA + OH− |
| Weak base + strong acid | pH < 7 | BH+ is a weak acid and makes H3O+: NH4+ + H2O ⇌ NH3 + H3O+ |
At the equivalence point the acid and base have used each other up, so the pH depends on what is left in the flask. The rule: look at the major species at equivalence and ask whether any of them react with water. Strong acid plus strong base leaves ions like Na+ and Cl−, which do not react with water, so the pH is 7. Weak acid plus strong base leaves the conjugate base A−, a weak base that pulls H+ off water and makes a little OH−, so the pH is above 7, like the 8.72 for acetic acid. Weak base plus strong acid is the mirror image: titrating ammonia with HCl leaves NH4+, which gives H+ to water, so the pH is below 7. On the AP exam, always justify the equivalence pH by naming the species and the reaction it does with water.
Polyprotic Acids
- A diprotic acid has two H+ to give: H2A → HA− → A2−.
- There are two jumps, one for each H+.
- Veq2 = 2 × Veq1

Some acids have more than one acidic proton. A diprotic acid, H2A, gives away its two H+ ions one at a time: first H2A becomes HA−, then HA− becomes A2−. Because the protons come off one at a time, the curve has two jumps and two equivalence points. Each proton takes the same number of moles of base, so the second equivalence volume is exactly twice the first, and counting the jumps tells you how many acidic protons the acid has. At the start the solution is mostly H2A, at the first equivalence point it is mostly HA−, and at the second it is mostly A2−. Halfway to each equivalence point the two neighboring species are equal, so the pH there equals pKa1 or pKa2. On the AP exam you need to name which species are present in large amounts at any point on the curve.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Finding Concentration
A 25.00 mL sample of acetic acid, CH3COOH, is titrated with 0.1000 M NaOH. The equivalence point is reached after 18.62 mL of NaOH is added. What is the concentration of the acetic acid?
Show the solution
- Equation: CH3COOH + OH− → CH3COO− + H2O (1:1). The reaction with a strong base goes to completion, so at equivalence, mol base = mol acid.
- Known: 18.62 mL = 0.01862 L of 0.1000 M NaOH; 25.00 mL = 0.02500 L of acid.
- Calculate: mol OH− = (0.1000 mol/L)(0.01862 L) = 1.862 × 10−3 mol.
- Calculate: mol CH3COOH = mol OH− = 1.862 × 10−3 mol.
- Plug in: M = 1.862 × 10−3 mol ÷ 0.02500 L = 0.07448 mol/L.
- Check: Every measurement has four significant figures, so the answer has four. Divide by the volume of the acid sample, not the base.
- Answer: [CH3COOH] = 0.07448 M
Common trap: dividing by the total volume, 43.62 mL. The question asks for the concentration of the original acid sample, so divide by 25.00 mL.
Example 2: Ka from a Curve
A weak acid, HA, is titrated with NaOH. Use the titration curve to determine the Ka of HA.

Show the solution
- Known: At the half-equivalence point, [HA] = [A−], so pH = pKa.
- Known: The pH at the half-equivalence point is 4.20, so pKa = 4.20.
- Equation: Ka = 10−pKa
- Plug in: Ka = 10−4.20
- Calculate: 10−4.20 = 6.3 × 10−5
- Check: The pKa has two decimal places, so Ka gets two significant figures.
- Answer: Ka = 6.3 × 10−5
Common trap: reading the pH at the equivalence point (25 mL) instead of halfway there. The equivalence point pH is above 7 and has nothing to do with pKa directly.
Example 3: Diprotic Species
The curve shows a diprotic acid, H2A, titrated with NaOH. Identify the major species at point X. Justify your answer.

Show the solution
- Known: The equivalence points are at the centers of the two jumps: first at 25 mL, second at 50 mL (twice the first, as expected for a diprotic acid).
- Known: From 0 to 25 mL, OH− turns H2A into HA−. From 25 to 50 mL, OH− turns HA− into A2−.
- Calculate: X = 37.5 mL, exactly halfway from 25 to 50 mL, so X is the second half-equivalence point.
- Claim: The major species at X are HA− and A2− in equal amounts, along with Na+ and water.
- Evidence: Point X is halfway between the first and second equivalence points.
- Reasoning: By the first equivalence point, all of the H2A has been converted to HA−, and by point X, half of the HA− has reacted with OH− to form A2−. Therefore HA− and A2− are present in equal concentrations, and the pH at X equals pKa2.
- Answer: HA− and A2− in equal amounts (pH = pKa2)
Common trap: answering H2A. By the first equivalence point, almost all of the H2A is gone.
Example 4: Weak or Strong?
25.0 mL of 0.10 M HX is titrated with 0.10 M NaOH. Is HX a strong acid or a weak acid? Justify using two features of the curve.

Show the solution
- Calculate: If HX were strong, it would ionize completely: [H3O+] = 0.10 M and pH = −log(0.10) = 1.00.
- Evidence: The curve actually starts at pH 2.38, which is greater than 1.00, so there is much less H3O+ than a strong acid would give. HX is only partly ionized.
- Evidence: The pH at the equivalence point is 8.22, which is greater than 7, so the conjugate base X− is a weak base.
- Claim: HX is a weak acid.
- Reasoning: A 0.10 M strong acid would have an initial pH of 1.00, but this curve starts at pH 2.38, so HX is only partially ionized. Also, the pH at the equivalence point is above 7 because X− is a weak base that reacts with water to produce OH−. (The flat buffer region before the equivalence point is a third sign.)
- Answer: HX is a weak acid.
Common trap: calling it strong just because the curve has a big jump. Weak acids have a jump too, just a shorter one.
Practice
- 8.5 Acid-Base Titrations Practice Worksheet (PDF)
- 8.5 Acid-Base Titrations Practice Answer Key (PDF)
Titrate a Weak Acid
Titrate acetic acid with NaOH, then read the equivalence volume, the half-equivalence point, and the pKa from your own curve, or switch to a strong acid, a weak base, or a different indicator to compare curve shapes. No login needed.
Practice with instant feedback
Answer original AP-style questions for Unit 8 and see an explanation right after each one. Choose Topic 8.5 or mix topics. No login needed.
Lesson Slides
Big Ideas
- At the equivalence point, mol acid = mol base, which gives an unknown concentration.
- At the half-equivalence point, [HA] = [A−], so pH = pKa.
- For a weak acid titrated with a strong base, the equivalence pH is above 7.
- Polyprotic acids show one jump for each acidic proton.
Exam tip: To find pKa from a curve, first locate the equivalence volume, then read the pH at half of that volume, never at the equivalence point itself.
Back to the essential question: The volume at the equivalence point tells how much acid or base was in the solution, and the shape of the curve tells whether it is weak or strong, its pKa, and how many acidic protons it has. Next up, Topic 8.6 zooms in on molecules to see how their structure decides whether an acid is strong or weak.
AP Alignment
This lesson covers Topic 8.5, Acid-Base Titrations, in Unit 8 (Acids and Bases) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 8.5.A: Explain results from the titration of a mono- or polyprotic acid or base solution, in relation to the properties of the solution and its components.
Essential knowledge: 8.5.A.1, 8.5.A.2, 8.5.A.3, 8.5.A.4, 8.5.A.5
Suggested skill: 5.D Mathematical Routines. Identify information presented graphically to solve a problem.