AP Chemistry · Unit 8: Acids and Bases

8.1 Introduction to Acids and Bases

In this lesson

Take it with you

Essential Question

What does pH tell us about a solution?

By the end of this lesson, you should be able to identify Brønsted-Lowry acids, bases, and conjugate pairs, explain how water autoionizes, and use Kw, pH, and pOH to describe any aqueous solution. This builds on the acid-base reactions you met in Topic 4.8.

Video lesson coming soon. In the meantime, read through the lesson below.

Brønsted-Lowry Acids and Bases

  • Acid: donates H+ (a proton)
  • Base: accepts H+
Particle diagram of HCl plus H2O forming H3O+ and Cl-. A red arrow labeled H+ shows the red hydrogen moving from HCl (labeled acid) to the water molecule (labeled base), where it ends up on the hydronium ion.

In the Brønsted-Lowry model, an acid is a substance that donates an H+ ion, and a base is a substance that accepts an H+ ion. An H+ ion is a hydrogen atom that lost its electron, so it is really just a single proton. That is why acids are called proton donors and bases are called proton acceptors. In the diagram, HCl gives its H+ to a water molecule, so HCl is the acid and water is the base. Follow the red hydrogen: it ends up on the water, making H3O+, the hydronium ion, and what is left of HCl is the chloride ion, Cl−. On the AP exam, H+ and H3O+ are both accepted, but H3O+ is preferred.

Conjugate Acid-Base Pairs

  • Conjugates differ by exactly one H+
  • Pair 1: NH3 and NH4+
  • Pair 2: H2O and OH−
The equation NH3 + H2O in equilibrium with NH4+ + OH-. A blue bracket links NH3 (base) and NH4+ (conjugate acid) as Pair 1, and a red bracket links H2O (acid) and OH- (conjugate base) as Pair 2.

When ammonia reacts with water, water hands an H+ to ammonia. So in this reaction water is the acid and ammonia is the base. Notice that water was a base in the HCl reaction and an acid here: water can do both. When NH3 gains an H+, it becomes NH4+, so NH3 and NH4+ are a conjugate acid-base pair. When water loses an H+, it becomes OH−, so H2O and OH− are the second pair. AP exam trick: to find a conjugate base, take one H+ off the acid and lower the charge by one; to find a conjugate acid, add one H+ to the base and raise the charge by one.

Water Autoionization

  • Water reacts with itself
  • One H2O gives H+ to another
  • Only about 2 in every billion H2O molecules ionize
Particle diagram of two water molecules in equilibrium with H3O+ and OH-. The first water, labeled acid, gives its red hydrogen to the second water, labeled base, forming a hydronium ion and a hydroxide ion.

2 H2O(l) ⇌ H3O+(aq) + OH−(aq)

Since water can act as an acid and as a base, it can react with itself. One water molecule donates an H+, and another water molecule accepts it. This is called autoionization, and the products are one hydronium ion and one hydroxide ion. Every time one H3O+ forms, one OH− forms too, so in pure water the concentrations of H3O+ and OH− are always equal. That is what makes pure water neutral. The equilibrium lies very far to the left, with only about 2 out of every billion water molecules ionized at any moment, but those few ions are the key to the whole pH scale.

The Water Constant

Kw = [H3O+][OH−] = 1.0 × 10−14 at 25 °C

  • Pure water: [H3O+] and [OH−] are both 1.0 × 10−7 M
  • Tiny Kw: water barely ionizes

Because autoionization is an equilibrium, it has an equilibrium constant called Kw, the water constant. Kw equals the concentration of H3O+ times the concentration of OH−. Water is a pure liquid, so it does not appear in the expression. At 25 °C, Kw is 1.0 × 10−14, a very small number that tells us water barely ionizes; memorize this value, because you will use it in almost every problem in this unit. In pure water the two concentrations are equal, so x · x = 1.0 × 10−14 and x = 1.0 × 10−7 M. Big idea: Kw holds in any aqueous solution, not just pure water, so if one concentration goes up, the other must go down.

pH and pOH

pH = −log[H3O+]     pOH = −log[OH−]

  • “p” means “take the −log of”
  • More H3O+ means a lower pH
  • [H3O+] = 1.0 × 10−3 M → pH = 3.00
  • [OH−] = 1.0 × 10−5 M → pOH = 5.00

Concentrations like 1.0 × 10−7 M are awkward to work with, so chemists use a shortcut. pH is the negative log of the H3O+ concentration, and pOH is the negative log of the OH− concentration. When the concentration is a clean power of ten, the pH is just the exponent with the sign flipped: 1.0 × 10−3 M gives a pH of 3.00. Sig fig rule for logs: the number of decimal places in the pH equals the number of sig figs in the concentration, so 1.0 (two sig figs) gives 3.00 (two decimal places). Because of the minus sign, more H3O+ means a lower pH.

The pH Scale

  • Each pH unit = 10× change in [H3O+]
  • Lower pH = more acidic
  • pH 3 has 10 × 10 = 100× more H3O+ than pH 5
A pH scale from 0 to 14 colored from red at 0 through green at 7 to purple at 14. A red bracket marks 0 to 6 as Acidic: pH < 7, 7 is marked Neutral, and a purple bracket marks 8 to 14 as Basic: pH > 7.

At 25 °C, solutions with a pH below 7 are acidic, exactly 7 is neutral, and above 7 is basic. Lower pH means more H3O+, so the strongest acids sit at the red end of the scale. Because pH is a log scale, each step of one pH unit is a factor of ten in H3O+ concentration. Going from pH 3 to pH 4, the H3O+ concentration drops to one tenth; going from pH 3 to pH 5 is two steps, so it is 10 × 10, a factor of 100. Students lose points on this all the time: count the pH units, then multiply that many factors of ten together.

pH + pOH = 14 (at 25 °C)

  • Know one value, find the other three
Four-corner diagram. Top row: [H3O+] and [OH-] joined by an arrow labeled multiply: 1.0 x 10^-14. Bottom row: pH and pOH joined by an arrow labeled add: 14.00. Vertical arrows labeled -log connect each concentration to its p value.

pH + pOH = 14.00

This four-corner diagram connects everything in this lesson. The top row is concentrations and the bottom row is p values. Going down, take the negative log. Going up, undo the log: [H3O+] = 10−pH, and the same idea works on the right side for OH− and pOH. Going across the top, the two concentrations multiply to give Kw, 1.0 × 10−14 at 25 °C. Taking the negative log of that whole equation gives the bottom row, pH + pOH = 14.00. Remember that the 14 comes from Kw at 25 °C, so it only works at that temperature.

Water Constant and Temperature

  • Higher T → larger Kw
  • Neutral: [H3O+] = [OH−]
  • Neutral pH is 7 only at 25 °C
TKwNeutral pH
0 °C1.14 × 10−157.47
25 °C1.0 × 10−147.00
50 °C5.5 × 10−146.63

Kw is an equilibrium constant, and equilibrium constants change with temperature. Autoionization is endothermic, so as water gets warmer, more of it ionizes and Kw gets bigger. At 0 °C the neutral pH is 7.47, at 25 °C it is 7.00, and at 50 °C it drops to 6.63. All three are neutral! Neutral means [H3O+] = [OH−], and in pure water those are always equal no matter the temperature; the pH just is not 7 anymore. On the AP exam, if you see a neutral pH that is not 7, check the temperature.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: pH and pOH

The [H3O+] in a solution is 2.5 × 10−4 M at 25 °C. Calculate the pH and the pOH of the solution.

Show the solution
  1. Known: [H3O+] = 2.5 × 10−4 M, T = 25 °C
  2. Equation: pH = −log[H3O+]
  3. Plug in: pH = −log(2.5 × 10−4)
  4. Calculate: pH = 3.602 → 3.60 (2 sig figs in 2.5, so 2 decimal places)
  5. Calculate: pOH = 14.00 − pH = 14.00 − 3.60 = 10.40
  6. Check: The pH is below 7, and 2.5 × 10−4 M is far more H3O+ than the 1.0 × 10−7 M in pure water, so an acidic pH makes sense.
  7. Answer: pH = 3.60, pOH = 10.40

Example 2: Hydroxide from pH

A cleaning solution has a pH of 9.25 at 25 °C. Calculate the [OH−] in the solution.

Show the solution
  1. Known: pH = 9.25, T = 25 °C
  2. Equation: pOH = 14.00 − pH, then [OH−] = 10−pOH
  3. Plug in: pOH = 14.00 − 9.25 = 4.75
  4. Calculate: [OH−] = 10−4.75 = 1.778 × 10−5 M
  5. Check: The pOH 4.75 has two decimal places, so the concentration gets two sig figs.
  6. Answer: [OH−] = 1.8 × 10−5 M

Common trap: 10−9.25 = 5.6 × 10−10 M is the [H3O+], not the [OH−]. Always check which ion the question asks for.

Example 3: Pure Water at 50 °C

At 50 °C, Kw = 5.5 × 10−14. Calculate the pH of pure water at 50 °C. Is the water acidic, basic, or neutral?

Show the solution
  1. Known: Pure water, so [H3O+] = [OH−] = x; Kw = 5.5 × 10−14 at 50 °C
  2. Equation: Kw = [H3O+][OH−] = x2
  3. Plug in: x2 = 5.5 × 10−14
  4. Calculate: x = √(5.5 × 10−14) = 2.345 × 10−7 M
  5. Calculate: pH = −log(2.345 × 10−7) = 6.630 → 6.63 (2 sig figs in Kw, so 2 decimal places)
  6. Claim: The water is neutral.
  7. Evidence: In pure water, H3O+ and OH− are produced in a 1:1 ratio, so [H3O+] = [OH−].
  8. Reasoning: A pH of 7 marks neutral only at 25 °C. Kw is larger at 50 °C, so the neutral pH is lower.
  9. Answer: pH = 6.63; the water is neutral

Common trap: It is tempting to call the water acidic because 6.63 is less than 7. Neutral is defined by equal concentrations, not by pH 7.

↑ Back to top


Practice

Run the pH & Buffer Lab

The lab opens in Explorer mode with HCl. Read [H3O+], [OH−], pH, and pOH, then switch to a weak acid and compare how much each one ionizes. No login needed.

Lab worksheet: PDF | Answer key: PDF

Practice with instant feedback

Answer original AP-style questions for Unit 8 and see an explanation right after each one. Choose Topic 8.1 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Kw = [H3O+][OH−] = 1.0 × 10−14 at 25 °C
  • pH = −log[H3O+]; lower pH means more acidic, and each pH unit is a factor of ten
  • Neutral means [H3O+] = [OH−], which is pH 7 only at 25 °C
  • Conjugate acid-base pairs differ by exactly one H+

Exam tip: Match your sig figs to the log rule: the number of decimal places in a pH or pOH equals the number of sig figs in the concentration, and the same rule works in reverse when you convert a pH back to a concentration.

Back to the essential question: pH tells us the concentration of H3O+ on an easy log scale. From pH, we can tell whether a solution is acidic, basic, or neutral, and we can find pOH, [H3O+], and [OH−] too. Next up, Topic 8.2 shows how to calculate the pH of strong acids and strong bases.

↑ Back to top


AP Alignment

This lesson covers Topic 8.1, Introduction to Acids and Bases, in Unit 8 (Acids and Bases) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 8.1.A: Calculate the values of pH and pOH, based on Kw and the concentration of all species present in a neutral solution of water.

Essential knowledge: 8.1.A.1, 8.1.A.2, 8.1.A.3, 8.1.A.4

Suggested skill: 5.B Mathematical Routines. Identify an appropriate theory, definition, or mathematical relationship to solve a problem.

↑ Back to top