In this lesson
- Video lesson (coming soon)
- Lesson notes
- Worked examples
- Big ideas
- AP alignment
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- pH & Buffer Lab (activity)
- AP Chemistry Unit 8 Practice (activity)
Essential Question
How do we find the pH of a weak acid?
By the end of this lesson, you should be able to write Ka and Kb expressions, use an ICE table and the small x shortcut to find the pH of a weak acid or weak base, calculate percent ionization, and relate Ka and Kb for a conjugate pair. For a refresher on ICE tables, see Topic 7.7.
Video lesson coming soon. In the meantime, read through the lesson below.
Weak Acids Partly Ionize
- Strong acid: all molecules ionize
- Weak acid: only a few molecules ionize
- Most HA stays whole

Compare two acid solutions side by side. In the strong acid, HCl, every molecule gave its H+ to water, so the beaker holds only H3O+ and Cl− ions. In the weak acid, HA, almost all of the particles are still whole HA molecules. Only a small fraction of weak acid molecules ionize to make H3O+ and A−; the drawing actually exaggerates it, and in a real weak acid solution it is often closer to 1 out of every 100 molecules. So for a weak acid, [H3O+] is much smaller than the starting acid concentration, which is why you cannot just take the negative log of the acid concentration like you did for strong acids.
The Ka Expression
HA + H2O ⇌ H3O+ + A−
Ka = [H3O+][A−] / [HA]
- H2O is left out (pure liquid)
- Small Ka: mostly HA at equilibrium
In water, a weak acid HA gives an H+ to a water molecule, making H3O+ and A−, the conjugate base of the acid. The equilibrium arrow shows that this reaction goes both ways and reaches equilibrium with most of the HA still there. Because it is an equilibrium, it has an equilibrium constant called Ka, the acid ionization constant: products on top, the reactant HA on the bottom. Water is a pure liquid, so it stays out of the expression. Ka values for weak acids are much less than 1, and a small Ka means the equilibrium lies to the left, so most of the acid stays as HA molecules.
Ka and pKa
pKa = −log Ka
- Larger Ka → stronger acid
- Smaller pKa → stronger acid
| Acid | Ka | pKa |
|---|---|---|
| HF | 6.8 × 10−4 | 3.17 |
| CH3COOH | 1.8 × 10−5 | 4.74 |
| HOCl | 3.0 × 10−8 | 7.52 |
Ka values are tiny numbers with powers of ten, so chemists often use pKa instead. pKa is the negative log of Ka, the same idea as pH being the negative log of [H3O+]. In the table, HF has the largest Ka, 6.8 × 10−4, so it ionizes the most and is the strongest of these three acids; its pKa, 3.17, is the smallest. Going down the table, Ka gets smaller, pKa gets bigger, and the acids get weaker. This flip trips up a lot of students on the AP exam: a larger Ka means a stronger acid, but a smaller pKa means a stronger acid, because the negative sign in the log makes them move in opposite directions.
Weak Bases and Kb
NH3 + H2O ⇌ NH4+ + OH−
Kb = [NH4+][OH−] / [NH3]
- Weak bases form OH−
- Most NH3 stays un-ionized
- pKb = −log Kb
Weak bases work the same way in the other direction. Ammonia takes an H+ from a water molecule, making ammonium, NH4+, and hydroxide, OH−; the OH− is what makes the solution basic. The equilibrium constant is Kb, the base ionization constant, again with products on top, the base on the bottom, and water left out. Only a small fraction of the NH3 reacts, so most of it stays as NH3 molecules, and pKb is the negative log of Kb. Big AP tip: in a weak base problem, your x is the OH− concentration, so you get pOH first and then subtract from 14.00 to get pH.
Setting Up an ICE Table
- One column per species in the K expression
- HA loses x, the ions each gain x
- Plug the E row into Ka
![ICE table with columns HA, H3O+, and A-. Initial row: [HA]0, 0, 0. Change row: -x, +x, +x. Equilibrium row: [HA]0 - x, x, x.](https://i0.wp.com/zornscience.org/wp-content/uploads/2026/10/apchem-8-3-weak-acid-ice-table.png?resize=1060%2C584&ssl=1)
An ICE table finds the concentrations at equilibrium: I is initial, C is change, and E is equilibrium, with one column for each species in the Ka expression (water is left out). At the start, the acid is at its starting concentration, [HA]0, and the ions from the acid start at zero; pure water has a tiny bit of H3O+, but it is so small next to the acid that it is ignored. Some of the acid ionizes, an unknown amount called x. The acid goes down by x, and because the ratio is 1:1:1, H3O+ and A− each go up by x. Add the rows to get the E row, plug it into Ka, and solve for x. The payoff: x equals [H3O+].
The Small x Shortcut
Ka = x2 / ([HA]0 − x) ≈ x2 / [HA]0
- x is tiny next to [HA]0
- So drop the −x on the bottom
- Then check: is x under 5% of [HA]0?
- 5% check: x ÷ [HA]0 × 100% must be less than 5%
Plugging the E row into Ka gives x2 / ([HA]0 − x), which would need the quadratic formula. But weak acids barely ionize, so x is very small compared to the starting concentration, and subtracting it barely changes the denominator. Dropping the −x makes the math easy: x2 = Ka × [HA]0, so x = √(Ka × [HA]0). After you solve, check the shortcut: divide x by the starting concentration and multiply by 100%. If the result is under 5%, the shortcut is fine; if it is over 5%, go back and solve with the quadratic. Showing this quick check on the AP exam is a great habit.
Percent Ionization
% ionization = [H3O+]eq / [HA]0 × 100%
- Fraction of HA that ionizes
- Small for weak acids

Percent ionization tells you what fraction of the acid molecules actually ionized. Divide the equilibrium H3O+ concentration (your x from the ICE table) by the starting acid concentration and multiply by 100%. A strong acid is 100% ionized, while a weak acid is often only about 1% ionized; that is the whole idea of a weak acid in one picture. This is the same math as the 5% check, so if you already did the check, you already have the percent ionization. On the AP exam you might be given the pH instead, so work backward to [H3O+] first, then plug it into the equation.
Conjugate Pair Constants
Ka × Kb = Kw pKa + pKb = 14.00 (at 25 °C)
- Only for a conjugate pair
- Larger Ka → smaller Kb

Every weak acid has a conjugate base with its own Kb. HF loses an H+ to become fluoride, F−, and fluoride can gain an H+ back to become HF. For any conjugate pair, Ka × Kb = Kw, which is 1.0 × 10−14 at 25 °C. Check it with HF: (6.8 × 10−4)(1.5 × 10−11) gives about 1.0 × 10−14. Taking the negative log of both sides gives pKa + pKb = 14.00 at 25 °C. Since the product is fixed, a stronger acid always has a weaker conjugate base, which is why the conjugate bases of strong acids, like chloride, are too weak to change the pH. Big AP trap: this only works for a conjugate pair, not for the Ka of one acid and the Kb of an unrelated base.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: pH of Acetic Acid
Calculate the pH of a 0.10 M solution of acetic acid, CH3COOH. (Ka = 1.8 × 10−5)
Show the solution
- Known: Acetic acid is a weak acid: CH3COOH + H2O ⇌ H3O+ + CH3COO−; [HA]0 = 0.10 M, Ka = 1.8 × 10−5
- Equation: Ka = [H3O+][CH3COO−] / [CH3COOH]. ICE table: I: 0.10, 0, 0. C: −x, +x, +x. E: 0.10 − x, x, x
- Plug in: 1.8 × 10−5 = x2 / (0.10 − x) ≈ x2 / 0.10
- Calculate: x2 = (1.8 × 10−5)(0.10) = 1.8 × 10−6, so x = 1.34 × 10−3 M = [H3O+]
- Check: (1.34 × 10−3 / 0.10) × 100% = 1.3%, less than 5%, so the shortcut is OK
- Calculate: pH = −log(1.34 × 10−3) = 2.87 (0.10 has 2 sig figs, so 2 decimal places)
- Answer: pH = 2.87
Common trap: Taking the negative log of 0.10 gives pH 1.00, which is what a strong acid would do. A weak acid has a higher pH than a strong acid at the same concentration.
Example 2: Percent Ionization
A 0.15 M solution of a weak acid, HA, has a pH of 2.90. Calculate the percent ionization of HA.
Show the solution
- Known: [HA]0 = 0.15 M, pH = 2.90
- Equation: % ionization = [H3O+]eq / [HA]0 × 100%, and [H3O+] = 10−pH (no Ka or ICE table needed)
- Calculate: [H3O+] = 10−2.90 = 1.26 × 10−3 M
- Plug in: % ionization = (1.26 × 10−3 M / 0.15 M) × 100%
- Calculate: 0.0084 × 100% = 0.84%
- Check: pH 2.90 has two decimal places, so [H3O+] has two sig figs, and 0.15 also has two. Less than 1% ionized is exactly what we expect for a weak acid.
- Answer: 0.84% ionized
Common trap: Do not divide the pH by the concentration. Always convert pH to [H3O+] first.
Example 3: pH of Ammonia
Calculate the pH of a 0.20 M solution of ammonia, NH3, at 25 °C. (Kb = 1.8 × 10−5)
Show the solution
- Known: Ammonia is a weak base: NH3 + H2O ⇌ NH4+ + OH−; [NH3]0 = 0.20 M, Kb = 1.8 × 10−5
- Equation: Kb = [NH4+][OH−] / [NH3]. ICE table: I: 0.20, 0, 0. C: −x, +x, +x. E: 0.20 − x, x, x
- Plug in: 1.8 × 10−5 = x2 / (0.20 − x) ≈ x2 / 0.20
- Calculate: x2 = (1.8 × 10−5)(0.20) = 3.6 × 10−6, so x = 1.90 × 10−3 M = [OH−]
- Check: 1.90 × 10−3 / 0.20 × 100% is about 0.95%, well under 5%
- Calculate: pOH = −log(1.90 × 10−3) = 2.72
- Calculate: pH = 14.00 − 2.72 = 11.28 (0.20 has 2 sig figs, so 2 decimal places)
- Answer: pH = 11.28
Common trap: Reporting 2.72 as the pH. Here x is [OH−], not [H3O+]; if a base gives you an acidic pH, stop and convert from pOH.
Example 4: Ka of NH4+
The Kb of NH3 is 1.8 × 10−5. Calculate Ka and pKa for its conjugate acid, NH4+.
Show the solution
- Known: NH3 and NH4+ are a conjugate pair (they differ by one H+); Kb = 1.8 × 10−5, Kw = 1.0 × 10−14 at 25 °C
- Equation: Ka × Kb = Kw, so Ka = Kw / Kb
- Plug in: Ka = (1.0 × 10−14) / (1.8 × 10−5)
- Calculate: 1.0 ÷ 1.8 = 0.556 and 10−14 ÷ 10−5 = 10−9, so Ka = 5.56 × 10−10, which rounds to 5.6 × 10−10
- Calculate: pKa = −log(5.56 × 10−10) = 9.26 (2 sig figs in Ka, so 2 decimal places)
- Check: pKb = −log(1.8 × 10−5) = 4.74, and 14.00 − 4.74 = 9.26. It matches.
- Answer: Ka = 5.6 × 10−10, pKa = 9.26
Common trap: Do not just flip the sign or take 1/Kb. You have to divide Kw by Kb. A Ka this small makes sense: ammonium is the conjugate acid of a weak base, so it is a very weak acid.
Practice
- 8.3 Weak Acid and Base Equilibria Practice Worksheet (PDF)
- 8.3 Weak Acid and Base Equilibria Practice Answer Key (PDF)
Run the pH & Buffer Lab
The lab opens in Explorer mode with acetic acid. Find its pH and percent ionization, check your small x answer against the meter, and compare it with a strong acid. No login needed.
Practice with instant feedback
Answer original AP-style questions for Unit 8 and see an explanation right after each one. Choose Topic 8.3 or mix topics. No login needed.
Lesson Slides
Big Ideas
- Weak acids and bases only partly ionize, so most molecules stay whole
- Use Ka or Kb with an ICE table: [HA]0 and Ka → ICE table → x = [H3O+] → pH
- Ka × Kb = Kw for a conjugate pair, so pKa + pKb = 14.00 at 25 °C
- For a weak base, x is [OH−]: find pOH first, then pH
Exam tip: When you use the small x shortcut, show the 5% check in your work. It takes one line, it justifies the approximation, and it gives you the percent ionization for free.
Back to the essential question: To find the pH of a weak acid, use its Ka and an ICE table to find the small amount of H3O+ it actually makes, then take the negative log. Next up, Topic 8.4 mixes acids and bases together to figure out what is left after they react.
AP Alignment
This lesson covers Topic 8.3, Weak Acid and Base Equilibria, in Unit 8 (Acids and Bases) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:
- 8.3.A: Explain the relationship among pH, pOH, and concentrations of all species in a solution of a monoprotic weak acid or weak base.
Essential knowledge: 8.3.A.1, 8.3.A.2, 8.3.A.3, 8.3.A.4, 8.3.A.5, 8.3.A.6
Suggested skill: 5.C Mathematical Routines. Explain the relationship between variables within an equation when one variable changes.