Chemistry · Quantum

Lewis Structures

Essential Question

How do we show valence electrons?

In Ions and Exceptions, you wrote electron configurations for ions and learned a few exceptions to the filling order. Now we zoom in on the outermost electrons, the ones that actually react. By the end of this lesson, you should be able to find the number of valence electrons for a main-group atom, draw its Lewis dot symbol, and draw Lewis symbols for the ions that metals and nonmetals form.

Video not loading? Watch it on YouTube.

Valence Electrons

  • Valence electrons: highest energy level
  • They are the electrons that react
Chlorine's configuration, Cl: [Ne] 3s2 3p5, with the 3s2 3p5 part in red and bracketed underneath, labeled 2 + 5 = 7 valence electrons. To the right, a Bohr model of chlorine with a 17p nucleus and rings of 2, 8, and 7 electrons. The 7 electrons on the outer ring are red and labeled n = 3 shell: 7 electrons.

Valence electrons are the electrons in the outermost energy level, the level with the highest n. They sit on the outside of the atom, so they are the ones that react. For chlorine, the [Ne] part stands for 10 inner electrons, called core electrons. The highest level is n = 3, so count every electron with a 3 in front: 2 in the 3s plus 5 in the 3p gives 7 valence electrons. You can see the same 7 electrons in red on the outer ring of the Bohr model.

Valence Electrons from the Table

  • Groups 1 and 2: same as group number
  • Groups 13 to 18: drop the 1 (15 → 5)
A table with groups 1, 2, and 13 through 18 across the top. Period 1 shows H in group 1 and He in group 18. Period 2 shows Li, Be, B, C, N, O, F, and Ne. The bottom row gives valence electrons 1, 2, 3, 4, 5, 6, 7, and 8. The He cell is highlighted with a red arrow and the note He: only 2.

You do not have to write a full configuration every time. For main-group elements, the periodic table tells you the number of valence electrons. In groups 1 and 2, it equals the group number. In groups 13 through 18, just drop the 1 in front, so group 15 has 5 and group 17 has 7. Elements in the same group have the same number of valence electrons, which is why they act alike. Helium is the one exception: it sits in group 18 but only has 2 electrons total (1s2), so it has 2 valence electrons, not 8.

The Lewis Dot Symbol

  • Symbol = nucleus + inner (core) electrons
  • Dots = valence electrons
The Lewis dot symbol for chlorine: the letters Cl with 7 dots around them, a pair on top, a pair on the right, a pair on the bottom, and a single dot on the left. A blue arrow points to the letters with the label nucleus + 10 core electrons. A red arrow points to the dots with the label 7 valence electrons.

A Lewis dot symbol, named after the chemist Gilbert Lewis, is a quick way to show only the valence electrons. The element symbol stands for the nucleus plus all the inner electrons, so for chlorine the letters Cl stand for the nucleus and the 10 core electrons. Each dot stands for one valence electron, so chlorine gets 7 dots. We skip the core electrons because they stay tucked inside and do not react.

Placing the Dots

  • One dot per side before pairing (like Hund)
  • At most 2 per side, 8 dots total
Five nitrogen symbols in a row connected by arrows, showing the dots added one at a time, with the newest dot in red. Step 1: one dot on top. Step 2: a dot on the right. Step 3: a dot on the bottom. Step 4: a dot on the left. Step 5: a second dot pairs up on top. The last symbol is labeled nitrogen: 5 electrons.

Picture four sides around the symbol: top, right, bottom, and left. Each side holds up to 2 dots, so the most any atom gets is 8. Put one dot on each side before you pair any up, just like Hund’s rule from orbital diagrams, where electrons spread out before they pair. Nitrogen has 5 valence electrons, so the first 4 go one per side and the fifth pairs up, leaving one pair and three single dots. Which side you start on does not matter much; what matters is the number of dots and not pairing them too early.

Period 2 Lewis Symbols

  • Each step across period 2 adds one dot
Lewis symbols for period 2 with group labels above and electron counts below. Li, group 1, 1 dot. Be, group 2, 2 dots. B, group 13, 3 dots. C, group 14, 4 single dots, one per side. N, group 15, 5 dots with one pair. O, group 16, 6 dots with two pairs. F, group 17, 7 dots with three pairs. Ne, group 18, 8 dots with all four sides paired.

Moving left to right across period 2, each element has one more valence electron than the one before it, so each Lewis symbol has one more dot. Lithium through carbon fill one dot per side, and starting with nitrogen the dots begin pairing up. Neon ends with 8 dots and all four sides full. Sodium, right below lithium, would look just like lithium with one dot: same group, same number of dots.

The Octet Rule

  • Atoms gain, lose, or share e− to get 8
  • H and He: full with 2 (the duet)
Three noble gas Lewis symbols. Ne with 8 dots, all four sides paired, labeled octet: 8. Ar with 8 dots, all four sides paired, labeled octet: 8. He with a single pair of dots on its right side, labeled duet: 2.

The noble gases almost never react. Neon and argon both have 8 valence electrons, and a full set of 8 is called an octet. The octet rule says atoms gain, lose, or share electrons until they have 8 valence electrons, just like a noble gas. In this lesson we focus on gaining and losing, which makes ions; sharing comes later in the bonding unit. Hydrogen and helium are the exceptions: their first energy level only holds 2 electrons, so 2 is full, which we call a duet. Helium’s 2 electrons share the 1s orbital, so we draw them as one pair.

Lewis Symbols for Cations

  • Metals lose all their valence electrons
  • No dots left, then write the + charge
A magnesium atom, Mg with one dot on top and one on the right, labeled Mg atom: 2 dots. An arrow labeled loses 2 electrons points to the ion, Mg with no dots and a 2+ charge at the upper right, labeled Mg2+ ion: 0 dots.

Metals sit on the left side of the table and have only a few valence electrons. It is much easier for a metal to lose 1, 2, or 3 electrons than to gain 5 or more, and the positive ion it forms is called a cation. Magnesium is in group 2, so it has 2 dots, and it loses both. With no dots left, write the 2+ charge at the upper right of the symbol. Check it: 12 protons minus 10 electrons gives +2, and Mg2+ now has the same electron arrangement as neon.

Lewis Symbols for Anions

  • Nonmetals gain electrons to reach 8
  • Add brackets, then write the − charge
An oxygen atom, O with 6 dots (pairs on top and right, single dots on the bottom and left), labeled O atom: 6 dots. An arrow labeled gains 2 electrons points to the oxide ion: O with 8 dots, all four sides paired, with the two new dots shown in red. The ion is enclosed in square brackets with a 2− charge at the upper right outside the bracket, labeled O2− ion: 8 dots.

Nonmetals sit on the right side of the table and already have 5, 6, or 7 valence electrons, so it is easier for them to gain a few electrons than to lose many. The negative ion they form is called an anion. Oxygen is in group 16 with 6 dots, so it gains 2 electrons to reach 8. Put square brackets around the symbol and its dots to show the charge belongs to the whole ion, then write the 2− charge at the upper right, outside the bracket. Check it: 8 protons and 10 electrons gives 2−. The pattern: metals lose dots, nonmetals gain dots, and both end up like a noble gas.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Phosphorus

How many valence electrons does a phosphorus atom have? Draw its Lewis symbol.

Show the solution
  1. Find phosphorus on the periodic table: P is in period 3, group 15.
  2. Count the valence electrons: group 15 → drop the 1 → 5 valence e−. Check: [Ne] 3s2 3p3, so 2 + 3 = 5.
  3. Draw the dots one per side, then pair: dots go top, right, bottom, left, then the fifth dot pairs up on top.
  4. Answer: 5 valence electrons; P with one pair and three single dots (it looks just like nitrogen, which is in the same group).

Example 2: A Calcium Ion

Draw the Lewis symbol for a calcium ion.

Show the solution
  1. Draw the calcium atom: Ca is in group 2 → 2 valence e−, so the atom has one dot on top and one on the right.
  2. Decide whether it gains or loses electrons: metal → loses 2 e−. 20 p and 18 e−, so charge = 20 − 18 = +2.
  3. Draw the ion: both valence electrons are gone, so write Ca with no dots and 2+ at the upper right. No brackets are needed because there are no dots to group.
  4. Answer: Ca2+ with no dots (same electron arrangement as argon).

Example 3: Bromine and Bromide

Draw the Lewis symbols for a bromine atom and a bromide ion.

Show the solution
  1. Count bromine’s valence electrons: Br is in group 17 → 7 valence e−. Check: [Ar] 4s2 3d10 4p5; only n = 4 counts (the 3d electrons are in level 3), so 2 + 5 = 7.
  2. Draw the bromine atom: Br with 7 dots: pairs on top, right, and bottom, and one single dot on the left.
  3. Gain electrons to reach 8: bromine is a nonmetal that needs only 1 more electron, so it gains 1 e− and has 8 dots, all four sides paired.
  4. Add brackets and the charge: square brackets around the 8-dot Br, with − at the upper right. Check: 35 p, 36 e− → −1.
  5. Answer: Bromine atom: Br with 7 dots. Bromide ion: [Br]− with 8 dots in brackets.

Example 4: Identify the Element

This Lewis symbol belongs to an element in period 3. Which element is it?

A mystery Lewis symbol: the letter X with 3 single dots, one on top, one on the right, and one on the bottom.
Show the solution
  1. Evidence, count the dots: 3 dots → 3 valence e−.
  2. Reasoning, match the dots to a group: 3 valence e− → group 13 (add the 1 back).
  3. Find the row: period 3 + group 13 → Al. Check: [Ne] 3s2 3p1, so 2 + 1 = 3.
  4. Answer: X = Al (aluminum). Boron also has 3 dots, but it is in period 2, so it does not fit.

↑ Back to top


Practice

Count valence electrons and draw Lewis dot symbols for atoms and ions, then identify a mystery element and fix a common mistake. Try it on your own first, then check your work with the answer key.

Explore the periodic table

See every element’s properties, and color the table by atomic radius, electronegativity or ionization energy to see the trends.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Valence e− are in the highest energy level
  • Lewis symbol: element symbol + valence dots
  • Metal cations: no dots, + charge
  • Nonmetal anions: 8 dots, brackets, − charge

Back to the essential question: We show valence electrons with a Lewis dot symbol, where the element symbol stands for the nucleus and core electrons and each dot is one valence electron, placed one per side before pairing. Metals lose all their dots and become cations with a + charge, while nonmetals gain dots up to 8 and become anions drawn in brackets with a − charge. Next up: Periodic Trends (Periods).

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-1: Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
  • HS-PS1-2: Construct and revise an explanation for the outcome of a simple chemical reaction based on the outermost electron states of atoms, trends in the periodic table, and knowledge of the patterns of chemical properties.

Disciplinary core ideas: PS1.A Structure and Properties of Matter

↑ Back to top