Chemistry · Quantum

Photoelectric Effect

Essential Question

Can light knock electrons loose?

In Emission Spectra, you saw excited atoms give off light. Now we flip it around and shine light onto atoms. By the end of this lesson, you should be able to explain the photoelectric effect, use E = hν to find the energy of a photon, decide whether light will knock electrons out of a metal, and explain why light acts like both a wave and a particle.

Video not loading? Watch it on YouTube.

The Photoelectric Effect

  • Light hits a clean metal
  • Ejected e−: photoelectrons
Three wavy violet arrows labeled light strike a gray bar labeled metal. Next to each one, a blue arrow points up and away from the metal to an electron, e minus, that has been knocked out.

When light shines on a clean metal surface, it can knock electrons right out of the metal. This is called the photoelectric effect. The name tells you what it is: photo means light, and electric has to do with electrons. Light goes in, electrons come out. The electrons that get knocked out are called photoelectrons, and the rest of this lesson is about when this happens and when it does not.

The Puzzle

Two panels side by side. Left panel, titled Bright red light: five large red waves hit a metal bar, and the caption says No electrons! Right panel, titled Dim violet light: a single small violet wave hits a metal bar and one electron flies off, with the caption Electrons fly off right away!

Scientists in the late 1800s found something strange. When they shined very bright red light on a metal, nothing happened. No electrons came out, even if they made the light brighter or waited longer. But when they shined just a little dim violet light on the same metal, electrons popped out right away. If light were only a wave, brighter light should always carry more energy and win. It doesn’t. The color of the light matters more than how bright it is.

Threshold Frequency

  • Threshold frequency (ν0): the minimum ν
  • Each metal has its own ν0
A horizontal frequency axis with low frequency (red) on the left and high frequency (violet, UV) on the right. A dashed line marks the threshold frequency, nu naught. The region to the left of it is shaded red and labeled No electrons. The region to the right is shaded green and labeled Electrons ejected.

Every metal has a threshold frequency, written ν0 and read “nu naught”. A threshold is a minimum, like a doorway you have to step over. Remember that frequency (ν) tells how many waves pass by each second, in units of s−1 (hertz). If the light’s frequency is below ν0, no electrons come out, no matter how bright the light is. If the frequency is above ν0, electrons come out immediately, even if the light is dim. That solves the puzzle: for that metal, red light is below the threshold and violet light is above it. Different metals have different thresholds, so a light that works on one metal might not work on another.

Einstein’s Idea: Photons

  • Light comes in packets: photons
  • One photon hits one electron
  • E = hν
  • E = energy of one photon (J)
  • h = 6.626 × 10−34 J·s (Planck’s constant)
  • ν = frequency (s−1)
A single wavy violet arrow labeled 1 photon hits a gray metal bar. A blue arrow leaves the metal and points to one electron, labeled 1 electron.

In 1905, Albert Einstein solved the puzzle. He said light is not just a smooth wave. It comes in tiny packets of energy called photons. The energy of one photon is E = hν, the same equation you used in Emission Spectra. Since h is a constant, a higher frequency means each photon carries more energy, so violet photons pack more energy than red photons. The key part: one photon hits one electron. An electron can’t add up energy from a bunch of weak photons, so ten thousand red photons still can’t free an electron, but one violet photon can.

Brightness vs. Frequency

Two columns. Left column, Brightness (intensity): a dim row shows two small green waves and a bright row shows five of the same green waves. Right column, Frequency (nu): a low frequency red wave with widely spaced crests, and a high frequency violet wave with tightly packed crests.
  • Brightness = number of photons: more electrons (if above ν0)
  • Frequency = energy of each photon: faster electrons (more KE)

Students mix these two up all the time. Brightness, also called intensity, is how many photons hit the metal each second. Brighter light means more photons, but each photon has the same energy as before. More photons can knock out more electrons, but only if each photon has enough energy. Below ν0, more photons just means more photons that fail. Frequency is the energy of each photon, from E = hν. Raising the frequency gives each photon more energy, so the electrons it knocks out move faster. KE stands for kinetic energy, the energy of motion. Try the PhET Photoelectric Effect simulation: slide the intensity and watch the number of electrons, then slide the wavelength and watch their speed.

Where the Extra Energy Goes

  • Extra photon energy becomes the electron’s KE
A tall yellow bar labeled h nu, the photon energy, equals a bar of the same height for the electron, split into two parts: the bottom part, h nu naught, is the energy to escape, and the top part, KE, is the energy of motion. Beside the bars is the equation KE = h nu minus h nu naught, or KE = h times the quantity nu minus nu naught.

KE = hν − hν0   or   KE = h(ν − ν0)

When a photon has more than enough energy, the extra doesn’t disappear, because energy is conserved. The photon’s energy, hν, is the energy in. Part of it, hν0, is the minimum energy needed to pull the electron free from the metal. Whatever is left over becomes the electron’s kinetic energy. You can also factor out h and write KE = h(ν − ν0); both give the same answer. If ν is less than ν0, the math would give a negative kinetic energy, which is impossible. That is just another way of saying no electron comes out.

Graph: Electron Energy vs. Frequency

  • Below ν0: no electrons
  • Above ν0: KE rises
  • Straight line
A graph of electron kinetic energy, in units of 10 to the negative 19 joules, versus light frequency, in units of 10 to the 14 per second. A thick red line lies flat at zero from 0 up to the threshold frequency, nu naught, marked with a dot at about 5.5. From there a blue straight line rises steadily, reaching about 4.3 at a frequency of 12.

This graph shows a sample metal with ν0 = 5.50 × 1014 s−1. Below the threshold frequency, the kinetic energy stays at zero because no electrons come out at all. Once the frequency passes ν0, electrons come out, and their kinetic energy rises in a straight line. Each step up in frequency adds the same amount of energy to every photon, so the line is straight. A different metal has a different ν0, so its line starts at a different spot, but it rises just as steeply. The slope is Planck’s constant for every metal.

Light: A Wave AND a Particle

Two columns. Left column, Wave behavior: a green wave labeled light wave, with an arrow marking one wavelength, lambda, from crest to crest. Right column, Particle behavior: a violet photon hits a gray metal bar and knocks out one electron.
  • Wave behavior: has a wavelength; waves can overlap
  • Particle behavior: comes in photons; knocks out electrons
  • Wave-particle duality: light acts like both

So is light a wave or a particle? The surprising answer is both. Light acts like a wave when it travels. It has a wavelength and a frequency, which is how we explained colors and c = λν in Emission Spectra. Waves can also overlap and add up or cancel out, which is called interference, and only waves do that. Light acts like a particle when it hits matter: photons deliver their energy one packet at a time, and one photon knocks out one electron. Scientists call this wave-particle duality. Duality means two sides, and light shows one side or the other depending on what we are doing with it.

Where You See It

  • Light frees electrons, making a current
Three cards. Solar panels: a tilted grid panel under a yellow sun. Automatic doors: two sliding doors with a sensor above them sending dashed red beams down. Phone cameras: the back of a phone with two camera lenses.

The photoelectric effect is not just a lab trick. When light frees electrons, those moving electrons are an electric current. Solar panels use photons from sunlight to free electrons, and that current powers homes and calculators. Many automatic doors and elevator doors use light sensors: light hitting the sensor makes a small current, and when you block the light, the current changes and the door reacts. The camera in your phone has millions of tiny light sensors that turn photons into electrons, and the phone turns those signals into a picture.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Energy of One Photon

What is the energy of one photon of light with a frequency of 7.50 × 1014 s−1?

Show the solution
  1. Known: ν = 7.50 × 1014 s−1, h = 6.626 × 10−34 J·s, E = ?
  2. Equation: E = hν
  3. Plug in: E = (6.626 × 10−34 J·s)(7.50 × 1014 s−1); s and s−1 cancel, leaving J
  4. Calculate: 6.626 × 7.50 = 49.695 and 10−34 × 1014 = 10−20, so E = 49.695 × 10−20 J = 4.9695 × 10−19 J
  5. Answer: E = 4.97 × 10−19 J (3 sig figs, from 7.50)

Example 2: Will It Eject Electrons?

Red light has a wavelength of 650. nm. A metal has a threshold frequency of 5.50 × 1014 s−1. Will the red light eject electrons from this metal?

Show the solution
  1. Known: λ = 650. nm, ν0 = 5.50 × 1014 s−1, c = 2.998 × 108 m/s, ν = ?
  2. Convert nm to m: 650. nm × (1 × 10−9 m ÷ 1 nm) = 6.50 × 10−7 m
  3. Solve for frequency: ν = c ÷ λ = (2.998 × 108 m/s) ÷ (6.50 × 10−7 m) = 4.61 × 1014 s−1
  4. Compare: 4.61 × 1014 s−1 < 5.50 × 1014 s−1, so ν < ν0
  5. Answer: No. ν = 4.61 × 1014 s−1 is below ν0, so no electrons are ejected. Making the red light brighter would not help, because brighter just means more photons that are each too weak.

Example 3: Electron Kinetic Energy

Light with a frequency of 8.00 × 1014 s−1 shines on a metal with a threshold frequency of 5.50 × 1014 s−1. What is the kinetic energy of each ejected electron?

Show the solution
  1. Known: ν = 8.00 × 1014 s−1, ν0 = 5.50 × 1014 s−1, h = 6.626 × 10−34 J·s, KE = ? (8.00 > 5.50, so electrons do come out)
  2. Equation: KE = hν − hν0 = h(ν − ν0)
  3. Subtract the frequencies: ν − ν0 = 8.00 × 1014 s−1 − 5.50 × 1014 s−1 = 2.50 × 1014 s−1
  4. Multiply by h: KE = (6.626 × 10−34 J·s)(2.50 × 1014 s−1) = 1.6565 × 10−19 J
  5. Answer: KE = 1.66 × 10−19 J (check: hν = 5.30 × 10−19 J, hν0 = 3.64 × 10−19 J, difference = 1.66 × 10−19 J)

Example 4: Doubling the Brightness

Green light already ejects electrons from a metal. A student doubles the brightness of the green light. What happens to the number of electrons? The energy of each electron?

Show the solution
  1. Claim: The number of electrons doubles. The energy of each electron stays the same.
  2. Evidence: Brightness = number of photons. Same color = same ν. E = hν.
  3. Reasoning: 1 photon → 1 electron, so 2× photons → 2× electrons. Same hν → same KE = hν − hν0.
  4. Answer: twice as many electrons; same energy for each electron. To make the electrons faster, change to a higher frequency color like blue or violet, not brighter light.

↑ Back to top


Practice

Explain brightness versus frequency, find threshold frequency, decide whether light will eject electrons, calculate electron kinetic energy, and interpret the KE graph. Try it on your own first, then check your work with the answer key.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Light is made of photons: E = hν
  • Only light above ν0 ejects electrons
  • Brighter = more electrons; higher ν = more KE
  • Light is a wave AND a particle

Back to the essential question: Yes, light can knock electrons loose, but only if each photon has enough energy. A photon frees an electron only if its frequency is at or above the metal’s threshold frequency, ν0, no matter how bright the light is, and any extra energy becomes the electron’s kinetic energy, KE = hν − hν0. That wraps up the Quantum unit. Next up: Predicting Charge.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS4-3: Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
  • HS-PS4-5: Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.

Disciplinary core ideas: PS4.B Electromagnetic Radiation

↑ Back to top