In this lesson
Take it with you
- Lesson slides (PDF)
- Practice worksheet (PDF)
- Answer key (PDF)
- Solutions Lab (activity)
Essential Question
How do we measure concentration?
Concentration tells us how much solute is packed into a solution, and chemists measure it with a number called molarity. By the end of this lesson, you should be able to calculate molarity from moles or grams, convert milliliters to liters, rearrange the molarity formula to find moles or volume, and express concentration as a percent by mass, a percent by volume, or parts per million (ppm).
Video not loading? Watch it on YouTube.
Concentrated vs. Dilute
- Dilute: a little solute
- Concentrated: a lot of solute
- Words are not precise enough

Both beakers hold the same volume of solution, but the one on the right has many more solute particles packed into that space. We call it concentrated and the other one dilute. The problem is that these words are not exact: one person’s “a lot” is another person’s “a little.” Scientists need a number that says exactly how much solute is in a given volume, and that number is molarity.
Molarity
- Read 2.0 M as “2.0 molar“
- 2.0 M means 2.0 mol in every liter

Molarity (M) is the number of moles of solute divided by the number of liters of solution. Because we divide moles by liters, the unit is moles per liter (mol/L), which we shorten to a capital M. A 2.0 M solution, read out loud as “2.0 molar,” has 2.0 moles of solute in every liter of solution. A bigger molarity means a more concentrated solution.
Rearranging the Formula
- Find M: M = mol ÷ L
- Find mol: mol = M × L
- Find L: L = mol ÷ M

Molarity connects three quantities: moles, molarity, and liters. If you know any two, you can find the third. In the triangle, the horizontal line means divide and the vertical line means multiply. Cover the quantity you want to find, and the two that are left show you the math. For example, covering mol leaves M next to L, so moles = molarity × liters.
Liters, Not Milliliters
- Molarity always uses liters

In lab we usually measure volume in milliliters, but the molarity formula needs liters. Since 1 L = 1000 mL, divide by 1000 to convert, which is the same as moving the decimal point three places to the left. Converting units never changes the number of significant figures, so 250. mL (three sig figs) becomes 0.250 L (still three). If you ever get a molarity that looks a thousand times too big, check whether you skipped this step.
Starting From Grams
- Molar mass comes from the periodic table
- NaCl: 22.99 + 35.45 = 58.44 g/mol

In lab, we cannot count moles directly. We weigh the solute on a balance, so we usually start with grams. First, divide the grams by the molar mass to get moles. Then divide the moles by the liters of solution to get molarity. To find a molar mass, add up the atomic masses from the periodic table: for sodium chloride, 22.99 + 35.45 = 58.44 g/mol.
Making a Solution in Lab
- Liters of solution, not liters of water added

To make a solution with an exact molarity, chemists use a volumetric flask, which has one line etched on its long neck. Weigh the solute, put it in the flask, and add only some water and swirl until it dissolves. Then add water slowly until the bottom of the meniscus sits right on the line, put in the stopper, and turn the flask over several times to mix. The L in molarity means the total volume of the finished solution, not the amount of water you poured in, because the solute takes up space too. A solution whose concentration is known exactly, like this one, is called a standard solution.
Percent by Mass, Percent by Volume, and ppm
- Percent by mass = (g solute ÷ g solution) × 100
- Percent by volume = (mL solute ÷ mL solution) × 100
- ppm = (g solute ÷ g solution) × 1,000,000
- Solution = solute + solvent
Molarity is the standard unit in the lab, but labels and water reports often use other units. Percent by mass compares the mass of the solute to the mass of the whole solution, so a 5.0% salt solution has 5.0 g of salt in every 100 g of solution. Percent by volume works the same way with volumes, and it is used when the solute is a liquid: 70% isopropyl alcohol has 70 mL of isopropyl alcohol in every 100 mL of solution. For very small amounts, like minerals or pollutants in water, chemists use parts per million (ppm): grams of solute per million grams of solution. In dilute water solutions, 1 ppm is about 1 mg of solute in every liter. In all three, the bottom of the fraction is the whole solution, solute plus solvent, not just the solvent.
Worked Examples
Try each problem on your own first, then open the solution to check your work.
Example 1: Molarity From Moles
What is the molarity of a solution made by dissolving 0.50 mol NaCl in enough water to make 2.0 L of solution?
Show the solution
- Known: mol = 0.50 mol NaCl, L = 2.0 L, M = ?
- Check units: the volume is already in liters, so no conversion is needed.
- Formula: M = mol ÷ L
- Plug in: M = 0.50 mol ÷ 2.0 L = 0.25 mol/L
- Answer: 0.25 M NaCl (two sig figs, from 0.50 and 2.0)
Example 2: Molarity From Grams
A student dissolves 11.7 g of NaCl in water to make 250. mL of solution. What is the molarity?
Show the solution
- Known: mass = 11.7 g NaCl, V = 250. mL, molar mass of NaCl = 58.44 g/mol, M = ?
- Convert mL to L: 250. mL ÷ 1000 = 0.250 L
- Grams to moles: 11.7 g × (1 mol ÷ 58.44 g) = 0.2002 mol NaCl (grams cancel)
- Formula and plug in: M = 0.2002 mol ÷ 0.250 L = 0.8008 mol/L
- Answer: 0.801 M NaCl (three sig figs, from 11.7 and 250.)
Example 3: Finding Moles
How many moles of HCl are in 350. mL of 0.200 M HCl?
Show the solution
- Known: M = 0.200 mol/L, V = 350. mL, mol = ?
- Convert mL to L: 350. mL ÷ 1000 = 0.350 L
- Formula: mol = M × L
- Plug in: mol = (0.200 mol/L) × 0.350 L = 0.0700 mol (liters cancel)
- Answer: 0.0700 mol HCl (three sig figs; the trailing zeros count)
Example 4: Grams Needed
How many grams of KCl are needed to make 500. mL of 0.150 M KCl?
Show the solution
- Known: M = 0.150 mol/L, V = 500. mL, grams = ?
- Convert mL to L: 500. mL ÷ 1000 = 0.500 L
- Find moles: mol = M × L = (0.150 mol/L) × 0.500 L = 0.0750 mol KCl (liters cancel)
- Molar mass: KCl = 39.10 + 35.45 = 74.55 g/mol
- Moles to grams: 0.0750 mol × (74.55 g ÷ 1 mol) = 5.591 g (moles cancel)
- Answer: 5.59 g KCl (three sig figs)
Example 5: Finding Volume
What volume of 2.00 M NaOH contains 0.500 mol of NaOH? Give your answer in mL.
Show the solution
- Known: M = 2.00 mol/L, mol = 0.500 mol NaOH, V = ? mL
- Formula: L = mol ÷ M
- Plug in: L = 0.500 mol ÷ (2.00 mol/L) = 0.250 L (moles cancel)
- Convert L to mL: 0.250 L × 1000 = 250. mL
- Answer: 250. mL of NaOH solution (three sig figs; the decimal point shows the zero is significant)
Example 6: Percent by Mass
A student dissolves 15.0 g of sugar in 135.0 g of water. (a) What is the percent by mass of sugar? (b) How many grams of sugar are in 40.0 g of this solution?
Show the solution
- Known: solute = 15.0 g sugar, solvent = 135.0 g water
- Mass of solution: 15.0 g + 135.0 g = 150.0 g (solute plus solvent, not just the water)
- Formula: percent by mass = (g solute ÷ g solution) × 100
- Plug in: (15.0 g ÷ 150.0 g) × 100 = 10.0% (grams cancel)
- Use the percent: 10.0% means 10.0 g sugar in every 100 g of solution, so 40.0 g × (10.0 g sugar / 100 g solution) = 4.00 g sugar
- Answer: (a) 10.0% sugar by mass; (b) 4.00 g sugar (three sig figs)
Example 7: Parts per Million
A 250.0 g sample of drinking water contains 0.00030 g of fluoride ions. What is the fluoride concentration in ppm?
Show the solution
- Known: solute = 0.00030 g F−, solution = 250.0 g
- Formula: ppm = (g solute ÷ g solution) × 1,000,000
- Plug in: (0.00030 g ÷ 250.0 g) × 1,000,000 = 1.2 ppm (grams cancel)
- Check: the fluoride is a tiny part of the water, so a percent would be only 0.00012%. That is why ppm is used.
- Answer: 1.2 ppm F− (two sig figs, from 0.00030)
Practice
Run the Solutions Lab
The lab opens in Make a Solution with NaCl and a 250.0 mL volumetric flask. Weigh the solute, fill to the line, and read the molarity. No login needed.
Lesson Slides
Big Ideas
- Molarity (M) = mol of solute ÷ L of solution
- Always convert mL to L first
- Molar mass links grams and moles
- Rearrange: mol = M × L and L = mol ÷ M
- Percent and ppm: solute ÷ the whole solution
Back to the essential question: We measure concentration with molarity, the number of moles of solute in each liter of solution. Next up: Dilutions.
NGSS Alignment
This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:
- HS-PS1-7: Use mathematical representations to support the claim that atoms, and therefore mass, are conserved during a chemical reaction.
Disciplinary core ideas: PS1.B Chemical Reactions