Chemistry · Solutions

Solubility Curves

Essential Question

How much solute can dissolve?

Stir sugar into iced tea and at some point it stops dissolving and settles on the bottom, so there is a limit. By the end of this lesson, you should be able to read a solubility curve, decide whether a solution is unsaturated, saturated, or supersaturated, and calculate how much solid crystallizes when a solution is cooled.

Video not loading? Watch it on YouTube.

What Is Solubility?

  • Solubility: max solute that dissolves
  • Units: g per 100 g H2O
  • Depends on temperature
Beaker of 100 grams of water at 20 degrees Celsius with dissolved salt particles, labeled maximum 36.0 grams of NaCl.

Solubility is the maximum amount of solute that can dissolve in a given amount of solvent at a given temperature. Chemists usually report it in grams of solute per 100 grams of water so different solutes can be compared fairly. For example, 100 g of water at 20 °C can dissolve at most 36.0 g of sodium chloride. If you change the temperature, the maximum changes too, and a solubility curve shows exactly how.

Unsaturated, Saturated, Supersaturated

  • Unsaturated: less than the max; an added crystal dissolves
  • Saturated: at the max; an added crystal sits on the bottom
  • Supersaturated: more than the max (unstable); crystals form fast
Three beakers with a seed crystal dropped into each: an unsaturated solution where the crystal dissolves, a saturated solution where it sits on the bottom, and a supersaturated solution where crystals form fast.

An unsaturated solution still has room for more solute. A saturated solution is full, holding exactly the maximum. A supersaturated solution holds more than the maximum, which you can make by dissolving solute in hot water and cooling it very gently. It is unstable, so dropping in one seed crystal makes the extra solute crystallize all at once. That is how hand warmers and rock candy work.

Reading a Solubility Curve

  • Find the temperature
  • Go up to the curve
  • Go left, read the grams
  • Example: NaNO3 at 10 °C: 80 g
Solubility curve graph with a dashed guide line going up from 10 degrees Celsius to the NaNO3 curve and left to 80 grams per 100 grams of water.

Temperature is on the x axis and solubility, in grams per 100 g of water, is on the y axis. Each small grid box is 10 °C wide and 10 g tall, and the y axis labels count by 30. To read a solubility, go straight up from the temperature to the correct curve, then straight left to the y axis. For sodium nitrate at 10 °C, the line lands on 80 g per 100 g H2O. Use a ruler or the edge of a paper to keep your lines straight.

Above, On, or Below the Line

  • Above the curve: supersaturated
  • On the curve: saturated
  • Below the curve: unsaturated
Solubility curve graph with the KNO3 curve highlighted and three points: A at 30 degrees Celsius and 120 grams above the curve, B at 50 degrees Celsius and 85 grams on the curve, and C at 60 degrees Celsius and 70 grams below the curve.

Every point on the graph stands for a solution: some number of grams dissolved at some temperature. Compare the point to the curve for that solute. A point on the curve holds exactly the maximum, so it is saturated. A point below the curve holds less than the maximum, so it is unsaturated. A point above the curve holds more than the maximum, so if all of it is dissolved, it is supersaturated.

Temperature and Solids

  • Solid curves slope up
  • Hotter = more dissolves
  • KNO3: steep, big change
  • NaCl: nearly flat
Solubility curve graph with the steep KNO3 curve and the nearly flat NaCl curve highlighted, showing that solid solubility rises with temperature by different amounts.

For most solid solutes, the curve slopes up, so hotter water dissolves more. How much depends on the solute. Potassium nitrate is steep, going from 13 g at 0 °C to 138 g at 70 °C. Sodium chloride is almost flat, going from only 35.7 g at 0 °C to 39.8 g at 100 °C. The steeper the curve, the more temperature matters.

Temperature and Gases

  • Gas curves slope down
  • Warm soda goes flat
Solubility curve graph with the dashed ammonia gas curve highlighted, sloping down from 88 grams at 0 degrees Celsius to 7 grams at 100 degrees Celsius.
Two beakers of soda: the cold one holds many dissolved gas bubbles, while the warm one holds fewer and gas bubbles escape upward.

Gases do the opposite of most solids. The ammonia (NH3) curve slopes down, from 88 g at 0 °C to just 7 g at 100 °C. When water warms up, dissolved gas particles gain energy and escape from the liquid. That is why a cold soda keeps its fizz, but a warm soda goes flat as its carbon dioxide escapes.

Cooling a Saturated Solution

  • Cooling: less dissolves
  • Extra solute crystallizes
Solubility curve graph with guide lines on the KNO3 curve at 50 degrees Celsius, 85 grams, and at 20 degrees Celsius, 32 grams.
A saturated KNO3 solution with 85 grams dissolved at 50 degrees Celsius is cooled to 20 degrees Celsius, leaving 32 grams dissolved and 53 grams of crystals on the bottom.

When a saturated solution of a solid is cooled, its solubility drops, and the water can no longer hold all of the solute. The extra comes out as solid crystals. The mass of crystals is the difference between the two readings. For KNO3 in 100 g of water cooled from 50 °C to 20 °C, that is 85 g − 32 g = 53 g of crystals. The solution left behind is still saturated at the new, lower temperature.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Reading Solubility

What is the maximum mass of KNO3 that can dissolve in 100 g of water at 60 °C?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Known: solute KNO3, 100 g water, 60 °C.
  2. Read the graph: go up from 60 °C to the red KNO3 curve, then left to the y axis: 106 g per 100 g H2O.
  3. Water check: the graph is already per 100 g of water, so no scaling is needed.
  4. Answer: 106 g KNO3

Example 2: Saturated or Not?

A solution has 50 g of NH4Cl dissolved in 100 g of water at 70 °C. Is it unsaturated, saturated, or supersaturated?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Known: 50 g NH4Cl dissolved in 100 g water at 70 °C.
  2. Read the maximum: the green NH4Cl curve at 70 °C is 60 g per 100 g H2O.
  3. Compare: 50 g < 60 g, so the point (70 °C, 50 g) is below the curve. It could dissolve 60 g − 50 g = 10 g more.
  4. Answer: Unsaturated

Example 3: Cooling a Solution

A saturated solution of KNO3 in 100 g of water is cooled from 70 °C to 30 °C. What mass of KNO3 crystallizes out?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Known: saturated KNO3 in 100 g water, cooled from 70 °C to 30 °C.
  2. Read at 70 °C: 138 g per 100 g H2O.
  3. Read at 30 °C: 46 g per 100 g H2O.
  4. Subtract: 138 g − 46 g = 92 g
  5. Answer: 92 g KNO3 crystallizes

Example 4: Scaling Up the Water

What is the maximum mass of NH4Cl that can dissolve in 200 g of water at 50 °C?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Known: solute NH4Cl, 200 g water, 50 °C.
  2. Read the graph: the green NH4Cl curve at 50 °C sits right on the 50 g gridline: 50 g per 100 g H2O.
  3. Scale up: 200 g H2O × (50 g NH4Cl / 100 g H2O) = 100 g NH4Cl (grams of water cancel).
  4. Answer: 100 g NH4Cl

Example 5: Comparing Curves

Which substance on the graph has a solubility that changes the least from 0 °C to 100 °C?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Idea: the least change means the flattest curve.
  2. Compare: KNO3 and NaNO3 rise steeply, NH3 drops steeply, and NH4Cl and KCl still change by 28 g or more.
  3. Check NaCl: 39.8 g − 35.7 g = 4.1 g of change from 0 °C to 100 °C.
  4. Answer: NaCl

Example 6: How Much Water?

How many grams of water are needed to dissolve 75 g of NH4Cl at 50 °C and make a saturated solution?

Solubility curve graph of temperature from 0 to 100 degrees Celsius versus solubility in grams per 100 grams of water, showing curves for KNO3, NaNO3, NH4Cl, KCl, NaCl, and ammonia gas.
Show the solution
  1. Known: 75 g NH4Cl, 50 °C, saturated, grams of water = ?
  2. Read the graph: the NH4Cl curve at 50 °C is 50 g per 100 g H2O.
  3. Flip the ratio: water is what you want, so put it on top: 100 g H2O / 50 g NH4Cl.
  4. Calculate: 75 g NH4Cl × (100 g H2O / 50 g NH4Cl) = 150 g H2O (grams of NH4Cl cancel).
  5. Check: 75 g is 1.5 times 50 g, so the water is 1.5 times 100 g.
  6. Answer: 150 g of water

↑ Back to top


Practice

Run the Solutions Lab

The lab opens in Solubility Curves with KNO3. Add solute to 100 g of water, heat and cool the beaker, and watch crystals form when the solution reaches the curve. No login needed.

Lab worksheet: PDF | Answer key: PDF

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Solubility: max g per 100 g H2O
  • On the curve = saturated; above = supersaturated; below = unsaturated
  • Most solids dissolve more when hot
  • Gases dissolve less when hot

Back to the essential question: the most solute that can dissolve is its solubility, the maximum grams per 100 g of water, which depends on the solute and the temperature and can be read right off a solubility curve. Cool a saturated solution and the extra solute crystallizes out. Next up: Molarity Calculations.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-3: Plan and conduct an investigation to gather evidence to compare the structure of substances at the bulk scale to infer the strength of electrical forces between particles.

Disciplinary core ideas: PS1.A Structure and Properties of Matter

↑ Back to top