Chemistry · Solutions

Solution Stoichiometry

Essential Question

How do we use molarity in a reaction?

Many reactions in the lab happen between two solutions, so the amount of a reactant is often given as a volume and a molarity instead of a mass. By the end of this lesson, you should be able to start with the volume and molarity of one solution and find the grams or the volume of another substance in the reaction.

Video not loading? Watch it on YouTube.

Reactions in Solution

  • Many reactions happen between two solutions
  • A precipitate is a solid that forms on mixing
A beaker of clear silver nitrate solution plus a beaker of clear sodium chloride solution are mixed, and a white solid precipitate of silver chloride settles at the bottom of the new beaker, which also contains dissolved sodium nitrate.

When you pour clear silver nitrate solution into clear sodium chloride solution, a white solid appears and sinks to the bottom. That solid is a precipitate. The balanced equation is AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq). The (aq) means dissolved in water, and the (s) means solid. To figure out how much solid forms, we need the moles of each reactant, and for a solution, molarity is how we get moles.

Molarity Is a Conversion Factor

  • Molarity = mol ÷ L
  • So: mol = M × L
  • Change mL to L first
A beaker holding 1 liter of 2.0 M sodium chloride solution with solute particles spread through it, labeled as containing 2.0 moles of sodium chloride.

Molarity (M) is moles of solute per liter of solution. A 2.0 M solution has 2.0 moles in every 1 liter, so you can write it as the fraction 2.0 mol / 1 L and use it as a conversion factor, just like molar mass. Multiplying the volume in liters by the molarity gives you moles. Problems usually give volumes in milliliters, so divide by 1000 to get liters first.

The Mole Ratio

  • Coefficients give the mole ratio
  • Put what you want on top
The balanced equation CaCl2 + 2AgNO3 → 2AgCl + Ca(NO3)2 with the coefficients 2 in red, and below it the two mole ratios 2 mol AgNO3 over 1 mol CaCl2, or 1 mol CaCl2 over 2 mol AgNO3.

The coefficients in a balanced equation tell you how many moles of each substance react or form. If no number is written, the coefficient is 1. In CaCl2 + 2AgNO3 → 2AgCl + Ca(NO3)2, 1 mole of calcium chloride reacts with 2 moles of silver nitrate. The mole ratio can be flipped either way, so put the substance you want on top and the substance you have on the bottom. Always use the coefficients, never the subscripts inside a formula.

The Roadmap

  • Liters of A × molarity of A → moles of A
  • Moles of A × mole ratio → moles of B
  • Moles of B × molar mass → grams of B, or moles of B ÷ molarity of B → liters of B
Flow chart: Liters of A times the molarity of A gives Moles of A. Moles of A times the mole ratio gives Moles of B. Moles of B times molar mass gives Grams of B, or Moles of B divided by the molarity of B gives Liters of B. A reminder box says mL divided by 1000 equals L.

Call the substance you know about A and the substance you want to find B. Every solution stoichiometry problem follows the same path: turn the volume of A into moles of A with its molarity, cross over to moles of B with the mole ratio, and then exit to whatever the question asks for. If it asks for mass, multiply by the molar mass of B. If it asks for the volume of a solution, divide by the molarity of B. Moles are the bridge between A and B, so you can never skip the middle step.

Steps to Solve

  1. Write the balanced equation
  2. Find moles of what you know
  3. Use the mole ratio
  4. Convert to what you want
Dimensional analysis chain: L A times mol A over 1 L A (step 2), times mol B over mol A (step 3), times g B over mol B (step 4), equals g B.

The four steps are the roadmap written as one dimensional analysis setup. Each fraction is a conversion factor, and the units cancel diagonally: liters of A cancel with liters of A, moles of A cancel with moles of A, and moles of B cancel with moles of B. The only unit left at the end is the one the question asked for. Round your final answer to the correct number of significant figures, which is usually the smallest number of sig figs in the measurements you were given.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Mass of a Precipitate

What mass of AgCl precipitate forms when 25.0 mL of 0.200 M AgNO3 reacts with excess NaCl?

AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq)

Show the solution
  1. Known: A = AgNO3, 25.0 mL of 0.200 M. B = AgCl. NaCl is in excess, so AgNO3 sets the amount of product. The coefficients of AgNO3 and AgCl are both 1.
  2. Moles of A: 25.0 mL ÷ 1000 = 0.0250 L. Then 0.0250 L × (0.200 mol AgNO3 / 1 L) = 0.00500 mol AgNO3. Liters cancel.
  3. Mole ratio: 0.00500 mol AgNO3 × (1 mol AgCl / 1 mol AgNO3) = 0.00500 mol AgCl. Moles of AgNO3 cancel.
  4. Convert to grams: Molar mass of AgCl = 107.87 + 35.45 = 143.32 g/mol. Then 0.00500 mol AgCl × (143.32 g AgCl / 1 mol AgCl) = 0.7166 g AgCl.
  5. Answer: 0.717 g AgCl (3 significant figures)

Example 2: Volume of a Reactant

How many mL of 0.100 M KI react completely with 20.0 mL of 0.250 M Pb(NO3)2?

Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq)

Show the solution
  1. Known: A = Pb(NO3)2, 20.0 mL of 0.250 M. B = KI, 0.100 M. The coefficients are 1 for Pb(NO3)2 and 2 for KI.
  2. Moles of A: 20.0 mL ÷ 1000 = 0.0200 L. Then 0.0200 L × (0.250 mol Pb(NO3)2 / 1 L) = 0.00500 mol Pb(NO3)2.
  3. Mole ratio: 0.00500 mol Pb(NO3)2 × (2 mol KI / 1 mol Pb(NO3)2) = 0.0100 mol KI.
  4. Convert to volume: 0.0100 mol KI × (1 L / 0.100 mol KI) = 0.100 L KI. Then 0.100 L × 1000 = 100. mL.
  5. Answer: 100. mL KI (the decimal point shows 3 significant figures)

Example 3: A Metal in Acid

How many grams of Zn react completely with 50.0 mL of 3.00 M HCl?

Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g)

Show the solution
  1. Known: A = HCl, 50.0 mL of 3.00 M. B = Zn. The coefficients are 1 for Zn and 2 for HCl.
  2. Moles of A: 50.0 mL ÷ 1000 = 0.0500 L. Then 0.0500 L × (3.00 mol HCl / 1 L) = 0.150 mol HCl.
  3. Mole ratio: 0.150 mol HCl × (1 mol Zn / 2 mol HCl) = 0.0750 mol Zn.
  4. Convert to grams: 0.0750 mol Zn × (65.38 g Zn / 1 mol Zn) = 4.9035 g Zn.
  5. Answer: 4.90 g Zn (3 significant figures)

Example 4: Neutralization

What volume of 0.250 M H2SO4, in mL, neutralizes 40.0 mL of 0.500 M NaOH?

H2SO4(aq) + 2NaOH(aq) → Na2SO4(aq) + 2H2O(l)

Show the solution
  1. Known: A = NaOH, 40.0 mL of 0.500 M. B = H2SO4, 0.250 M. The coefficients are 1 for H2SO4 and 2 for NaOH.
  2. Moles of A: 40.0 mL ÷ 1000 = 0.0400 L. Then 0.0400 L × (0.500 mol NaOH / 1 L) = 0.0200 mol NaOH.
  3. Mole ratio: 0.0200 mol NaOH × (1 mol H2SO4 / 2 mol NaOH) = 0.0100 mol H2SO4.
  4. Convert to volume: 0.0100 mol H2SO4 × (1 L / 0.250 mol H2SO4) = 0.0400 L. Then 0.0400 L × 1000 = 40.0 mL.
  5. Answer: 40.0 mL H2SO4 (3 significant figures)

↑ Back to top


Practice

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Molarity turns volume into moles: mol = M × L
  • Coefficients give the mole ratio from A to B
  • Moles are the bridge between A and B
  • Finish with molar mass (g) or molarity (L)

Back to the essential question: We use molarity as a conversion factor to change the volume of a solution into moles, use the mole ratio from the balanced equation to switch to the other substance, and then convert to grams with molar mass or to a volume with molarity. Next up: Titrations.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-7: Use mathematical representations to support the claim that atoms, and therefore mass, are conserved during a chemical reaction.

Disciplinary core ideas: PS1.B Chemical Reactions

↑ Back to top