Chemistry · Solutions

Characteristics of Solutions

In this lesson

Take it with you

Essential Question

What makes a mixture a solution?

Solutions are everywhere: the air you breathe, the soda you drink, and the salt water in the ocean. By the end of this lesson, you should be able to tell a solution from other mixtures, identify the solute and the solvent, use the rule “like dissolves like” to predict what dissolves, explain how water pulls an ionic compound apart, and classify substances as strong, weak, or nonelectrolytes.

Video lesson coming soon. In the meantime, read through the lesson below.

Homogeneous vs. Heterogeneous

  • Homogeneous: same throughout (a solution)
  • Heterogeneous: you can see different parts
Two beakers. The left beaker, labeled homogeneous salt water, has orange solute particles spread evenly through the water. The right beaker, labeled heterogeneous sand in water, has most of its orange particles piled on the bottom.

A mixture is two or more substances mixed together without being chemically bonded. In a homogeneous mixture, the particles are spread evenly, so every part looks and tastes the same. In a heterogeneous mixture, you can see different parts, like sand sitting at the bottom of a glass of water. A homogeneous mixture is called a solution.

Solute and Solvent

  • Solute: gets dissolved (less)
  • Solvent: dissolves it (more)
  • Solution = solute + solvent
A particle view of salt water in a beaker. A few large orange particles are labeled solute (salt), and many small blue particles are labeled solvent (water).

Every solution has two parts. The solute is the substance that gets dissolved, and it is usually the smaller amount. The solvent is the substance that does the dissolving, and it is usually the larger amount. In salt water, salt is the solute and water is the solvent. A quick way to find the solvent is to ask which substance there is more of.

Aqueous Solutions

  • Aqueous (aq): water is the solvent
  • Water is the “universal solvent”
The formula NaCl(aq) with an arrow pointing to (aq), labeled dissolved in water, next to a table of state symbols: (s) solid, (l) liquid, (g) gas, and (aq) aqueous, in water.

When water is the solvent, we call the solution aqueous, from the Latin word aqua for water. In a chemical formula, we show this with the state symbol (aq). For example, NaCl(aq) means sodium chloride dissolved in water, while NaCl(s) means solid salt crystals. Water is called the universal solvent because it dissolves more substances than any other common liquid, although it does not dissolve everything.

Not Just Liquids

  • Solute and solvent can be any state
Four cards showing types of solutions, each with a particle picture: gas in gas (air, O2 and Ar in N2), gas in liquid (soda, CO2 in water), solid in liquid (salt water, NaCl in water), and solid in solid (brass, zinc in copper). Orange particles are the solute and blue particles are the solvent.

Solutions are not always liquids. Air is a gas solution: nitrogen is the solvent because it makes up about 78% of air, and oxygen and argon are solutes. Soda is carbon dioxide gas dissolved in liquid water. Brass is a solid solution of zinc in copper. A solid solution of metals is called an alloy. In every case, the solvent is the substance there is more of.

Solutions, Colloids, and Suspensions

A comparison table with a picture of each mixture. Solution: particles smaller than 1 nm, does not settle, not removed by a filter, example salt water. Colloid: particles 1 to 1000 nm, does not settle, not removed by a filter, example milk and fog. Suspension: particles larger than 1000 nm, settles out, removed by a filter, example muddy water.

The big difference between these three mixtures is particle size. Solution particles are single ions or molecules, less than 1 nanometer across, so a solution looks clear (though it can still be colored). Colloid particles are medium sized, so colloids like milk look cloudy, but the particles never settle. Suspension particles are large enough to settle to the bottom and to be caught by a filter, like the mud in muddy water.

The Tyndall Effect

  • Tyndall effect: colloids scatter light
  • In a solution, the beam is invisible
Two flashlights shine through two containers. In the solution on the left, the beam passes through without being seen. In the cloudy colloid on the right, the beam shows up as a bright yellow band because the particles scatter the light.

A solution and a colloid can look alike, and neither one settles. To tell them apart, shine a light through them. Solution particles are too small to scatter light, so the beam passes through unseen. Colloid particles are big enough to scatter light in all directions, so you can see the path of the beam. This is the Tyndall effect, and you have seen it with headlights in fog or sunbeams in a dusty room.

Like Dissolves Like

  • Polar dissolves polar and ionic
  • Nonpolar dissolves nonpolar
  • Polar + nonpolar: they separate
A beaker with two layers: a yellow layer of oil, labeled nonpolar, floating on top of a blue layer of water, labeled polar.

Whether one substance dissolves in another depends on polarity. Polar solvents like water dissolve polar solutes, such as sugar, and ionic solutes, such as salt. Nonpolar solvents dissolve nonpolar solutes. Oil is nonpolar and water is polar, so water molecules stick to each other and push the oil out, forming two layers. The oil floats on top because it is less dense. Two liquids that mix in any amount, like ethanol and water, are miscible. Liquids that stay in separate layers, like oil and water, are immiscible. Solubility tells how much of a solute can dissolve; miscibility tells whether two liquids mix at all. Both follow the same polarity rule.

Dissolving Ionic Compounds

  • Water pulls ions apart: dissociation
A sodium ion surrounded by six water molecules with their red oxygen ends pointing toward it, and a chloride ion surrounded by six water molecules with their white hydrogen ends pointing toward it. Below is the equation NaCl(s) yields Na plus (aq) plus Cl minus (aq).

Water is polar: its oxygen end is partly negative (δ−) and its hydrogen ends are partly positive (δ+). When salt is added to water, the oxygen ends of water molecules surround each positive Na+ ion, and the hydrogen ends surround each negative Cl− ion. Water pulls the ions off the crystal and keeps them apart. This breaking apart into ions is called dissociation: NaCl(s) → Na+(aq) + Cl−(aq). The whole process of a solute spreading out through a solvent is called dissolution. For an ionic compound, dissolution happens by dissociation.

Electrolytes

  • Electrolyte: forms ions that conduct
Three conductivity testers. A strong electrolyte such as NaCl or HCl makes many ions and lights the bulb brightly. A weak electrolyte such as HF or NH3 makes few ions and lights the bulb dimly. A nonelectrolyte such as ethanol, C2H5OH, makes no ions and the bulb stays off.

An electrolyte is a solute that makes ions in water, and those ions let the solution conduct electricity. Strong electrolytes, like soluble ionic compounds and strong acids, break apart completely, so a conductivity tester glows brightly. Strong acids such as HCl are molecular, but they react with water to make ions, a process called ionization: HCl(g) + H2O(l) → H3O+(aq) + Cl−(aq). Ionization makes new ions, while dissociation separates ions that were already in the crystal. Weak electrolytes, like weak acids and weak bases, make only a few ions, so the bulb is dim. Nonelectrolytes, like most molecular compounds, dissolve as whole molecules and make no ions, so the bulb stays off.

Speeding Up Dissolving

  • Stir, heat, or crush: dissolves faster
  • Stirring and crushing: faster, not more
Three ways to speed up dissolving: stirring a beaker with a stirring rod, heating a beaker on a hot plate, and crushing one large orange cube into many small cubes to increase surface area.

Dissolving happens where the solvent touches the solute. Stirring brings fresh solvent to the solute, heating makes the particles move faster and collide more often, and crushing gives the solute more surface area. Stirring and crushing only change the rate, meaning how fast the solute dissolves, not how much can dissolve in the end. Temperature is different: for most solids it also changes how much can dissolve, which is the topic of the next lesson.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Classify the Mixture

A liquid looks milky. After a day, nothing has settled out. A flashlight beam is visible as it passes through. Is it a solution, colloid, or suspension?

Show the solution
  1. Clues: milky (cloudy), nothing settles, beam is visible.
  2. Settling: it does not settle, so it is not a suspension.
  3. Light beam: the beam is visible (Tyndall effect), so the particles scatter light and it is not a solution.
  4. Answer: colloid (milk is a real example)

Example 2: Like Dissolves Like

Will iodine, I2, dissolve better in water or in hexane, C6H14? Explain using polarity.

Show the solution
  1. Solute: I2 is two identical iodine atoms that share electrons equally, so it is nonpolar.
  2. Solvents: water, H2O, is polar. Hexane, C6H14, contains only carbon and hydrogen, so it is nonpolar.
  3. Rule: like dissolves like, so a nonpolar solute dissolves best in a nonpolar solvent.
  4. Answer: Hexane, because I2 and hexane are both nonpolar

Example 3: Classifying Electrolytes

Classify each as a strong electrolyte, weak electrolyte, or nonelectrolyte: a) KCl, b) C12H22O11 (sugar), c) HC2H3O2 (acetic acid).

Show the solution
  1. Ionic or molecular: KCl is a metal plus a nonmetal, so it is ionic. Sugar contains only nonmetals, so it is molecular. Acetic acid is a weak acid.
  2. KCl: KCl(s) → K+(aq) + Cl−(aq). It breaks apart completely into ions.
  3. Sugar: C12H22O11(s) → C12H22O11(aq). The molecules stay whole, so there are no ions.
  4. Acetic acid: only a small fraction of the molecules form H+ and C2H3O2− ions.
  5. Answer: a) strong electrolyte, b) nonelectrolyte, c) weak electrolyte

↑ Back to top


Practice

Run the Solutions Lab

The lab opens in Make a Solution with sucrose and the conductivity tester on. Make a sugar solution, then an ionic one, and see which solutes light the bulb. No login needed.

Lab worksheet: PDF | Answer key: PDF

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • A solution is a homogeneous mixture
  • The solvent dissolves the solute
  • Like dissolves like (polarity)
  • Ions in water make electrolytes

Back to the essential question: a mixture is a solution when it is homogeneous, with the solute spread evenly through the solvent as single ions or molecules. Those particles are so small that they never settle, pass through filters, and do not scatter a light beam. Next up: Solubility Curves.

↑ Back to top


NGSS Alignment

This lesson builds toward these Next Generation Science Standards (NGSS) performance expectations:

  • HS-PS1-3: Plan and conduct an investigation to gather evidence to compare the structure of substances at the bulk scale to infer the strength of electrical forces between particles.

Disciplinary core ideas: PS1.A Structure and Properties of Matter; PS2.B Types of Interactions

↑ Back to top