AP Chemistry · Unit 3: Properties of Substances and Mixtures

3.7 Solutions and Mixtures

Essential Question

How do we measure what is in a solution?

By the end of this lesson, you should be able to tell a homogeneous mixture from a heterogeneous one, and use molarity to find the concentration, moles, or volume of a solution, and even count the ions in it.

Video not loading? Watch it on YouTube.

Types of Mixtures

A mixture is two or more substances that are physically combined, not chemically bonded.

  • Homogeneous mixture (a solution): same properties throughout the sample
  • Heterogeneous mixture: properties depend on where in the sample you look
Two particle boxes. Left, homogeneous: blue and green particles evenly mixed, example sugar water. Right, heterogeneous: an orange oil layer on top of a blue water layer, example oil and water.

A sample of sugar water looks the same whether you take it from the top, middle, or bottom. In oil and water, a sample from the top is mostly oil and a sample from the bottom is mostly water. If you can see layers or regions, the mixture is heterogeneous.

Solutions Come in Every Phase

  • Gas: air, mostly N2 with O2 and other gases mixed in evenly
  • Liquid: salt water, with Na+ and Cl− ions spread evenly among water molecules
  • Solid: brass, an alloy where zinc atoms take the place of some copper atoms
Three particle boxes showing solutions in each phase. Gas: air, with N2 and O2 molecules spread apart. Liquid: salt water, with sodium and chloride ions among water molecules. Solid: brass, a lattice of copper atoms with some zinc atoms.

In all three, the mixture is uniform all the way through. That is what makes it a solution.

Solute and Solvent

  • Solute: the substance being dissolved
  • Solvent: the substance doing the dissolving, usually present in the larger amount
  • (aq) means aqueous, or dissolved in water. NaCl(aq) is sodium chloride dissolved in water.
A box of many small blue solvent (water) particles with a few larger green solute (sugar) particles spread among them.

Molarity

Concentration tells us how much solute is packed into a certain amount of solution. Molarity is the most common way to express concentration in the lab, and its equation is on the AP reference sheet.

M = moles of solute ÷ liters of solution

  • Units: mol/L, written as M
  • 0.5 M is read “0.5 molar” and means 0.5 mol of solute in every liter of solution.
Two beakers with the same volume of solution. The left has 3 solute particles, lower molarity. The right has 9 solute particles, higher molarity.

Both beakers hold the same volume of solution, but the right beaker has three times as many solute particles, so it has three times the molarity.

Making a Solution in the Lab

A volumetric flask has one line etched on its neck. When the liquid reaches that line, the flask holds an exact volume, like 250.0 mL.

  1. Add a measured mass of solute to the flask.
  2. Add some water and swirl until the solute dissolves.
  3. Add more water until the bottom of the meniscus sits on the line.
Three volumetric flasks in sequence: 1, add measured solute; 2, dissolve in some water; 3, add water up to the line etched on the neck.

Why not just add 250 mL of water to the solute? The solute takes up space too, so you would end up with more than 250 mL of solution and the wrong molarity. Molarity always uses the total volume of solution, not the volume of water added.

Rearranging the Equation

  • Find moles: n = M × V
  • Find volume: V = n ÷ M
  • Volume must be in liters. mL ÷ 1000 = L
Molarity triangle with n (moles) on top and M (mol/L) and V (liters) on the bottom. Cover the variable you want to find.

Cover the variable you want to find. Cover n and you see M next to V, so multiply. Cover V and you see n over M, so divide.

Counting Ions in Solution

  • Ionic compounds break apart into ions when they dissolve. This is called dissociation.
  • Na2SO4(s) → 2 Na+(aq) + SO42−(aq)
  • Ion concentration = molarity of the compound × number of that ion in the formula
One Na2SO4 formula unit, a sulfate ion between two sodium ions, dissolves in water. Three formula units give 3 sulfate ions and 6 sodium ions, twice as many Na+ as SO4 2-.

So 0.10 M Na2SO4 gives [Na+] = 0.20 M and [SO42−] = 0.10 M. Square brackets mean “the concentration of.” Molecular substances like sugar dissolve as whole molecules and do not break into ions.

Dilution

Dilution means adding water to a concentrated stock solution to make it less concentrated. Adding water does not change the moles of solute, and since M × V = moles:

M1V1 = M2V2

Dilution. A concentrated beaker with 8 solute particles in a small volume, M1 and V1. Adding water gives a dilute beaker with the same 8 particles spread through a larger volume, M2 and V2.
  • 1 = before dilution, 2 = after dilution
  • Volumes only need matching units on both sides, so mL is fine here.
  • V2 is the total final volume, not the amount of water added.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Finding Molarity

A student dissolves 7.45 g of KCl in enough water to make 250.0 mL of solution. What is the molarity of the solution?

Show the solution
  1. Given and find: 7.45 g KCl and 250.0 mL of solution. Find M, which needs moles and liters, so two conversions are needed.
  2. Molar mass: KCl = 39.10 + 35.45 = 74.55 g/mol
  3. Grams to moles: 7.45 g × (1 mol / 74.55 g) = 0.09993 mol KCl. Keep an extra digit until the end.
  4. mL to L: 250.0 mL × (1 L / 1000 mL) = 0.2500 L
  5. Substitute: M = 0.09993 mol ÷ 0.2500 L = 0.3997 M
  6. Answer: M = 0.400 M KCl (3 significant figures, limited by 7.45 g)

Example 2: Finding Volume

What volume, in mL, of 0.200 M CuSO4 solution contains 0.0150 mol of CuSO4?

Show the solution
  1. Given and find: M = 0.200 M and n = 0.0150 mol. Find V in mL.
  2. Equation: V = n ÷ M
  3. Substitute: V = 0.0150 mol ÷ 0.200 mol/L = 0.0750 L. Moles cancel, leaving liters.
  4. L to mL: 0.0750 L × (1000 mL / 1 L) = 75.0 mL
  5. Answer: V = 75.0 mL (3 significant figures)

Example 3: Counting Particles

How many chloride ions are present in 50.0 mL of 0.300 M MgCl2?

Show the solution
  1. Dissociation: MgCl2 → Mg2+ + 2 Cl−, so each mole of MgCl2 gives 2 moles of Cl−.
  2. mL to L: 50.0 mL ÷ 1000 = 0.0500 L
  3. Moles of MgCl2: n = M × V = (0.300 mol/L)(0.0500 L) = 0.0150 mol MgCl2
  4. Moles of Cl−: 0.0150 mol MgCl2 × (2 mol Cl− / 1 mol MgCl2) = 0.0300 mol Cl−
  5. Moles to ions: 0.0300 mol × (6.022 × 1023 ions / 1 mol) = 1.8066 × 1022 ions
  6. Answer: 1.81 × 1022 Cl− ions (3 significant figures)

Check: [Cl−] = 2 × 0.300 M = 0.600 M, and 0.600 mol/L × 0.0500 L = 0.0300 mol Cl−. Same answer either way.

Example 4: Dilution

What volume of 6.00 M HCl is needed to make 250.0 mL of 0.300 M HCl?

Show the solution
  1. Label: M1 = 6.00 M, V1 = ?, M2 = 0.300 M, V2 = 250.0 mL
  2. Rearrange: V1 = M2V2 ÷ M1
  3. Substitute: V1 = (0.300 M)(250.0 mL) ÷ 6.00 M. Molarity units cancel, leaving mL.
  4. Solve: 75.0 ÷ 6.00 = 12.5 mL
  5. Answer: V1 = 12.5 mL of 6.00 M HCl (3 significant figures)

In the lab, measure 12.5 mL of the 6.00 M acid, then add water until the total volume reaches 250.0 mL. Always add acid to water, not water to acid.

↑ Back to top


Practice

Practice with instant feedback

Answer original AP-style questions for Unit 3 and see an explanation right after each one. Choose Topic 3.7 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • A solution is a homogeneous mixture and can be a gas, liquid, or solid.
  • Molarity = moles of solute ÷ liters of solution.
  • For ions, multiply by the number of that ion in the formula.
  • Dilution keeps moles the same: M1V1 = M2V2.

Exam tip: you may see percent by mass or molality in other classes, but those calculations are not tested on the AP exam. Molarity is the one to master.

Back to the essential question: we measure what is in a solution with its concentration, and in AP Chemistry that means molarity, the moles of solute in each liter of solution. Next up, Topic 3.8 shows how to draw particle diagrams of solutions.

↑ Back to top


AP Alignment

This lesson covers Topic 3.7, Solutions and Mixtures, in Unit 3 (Properties of Substances and Mixtures) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 3.7.A: Calculate the number of solute particles, volume, or molarity of solutions.

Essential knowledge: 3.7.A.1, 3.7.A.2

Suggested skill: 5.F Mathematical Routines. Calculate, estimate, or predict an unknown quantity from known quantities by selecting and following a logical computational pathway and attending to precision (e.g., performing dimensional analysis and attending to significant figures).

↑ Back to top