AP Chemistry · Unit 3: Properties of Substances and Mixtures

3.8 Representations of Solutions

Essential Question

How can you draw what a solution looks like at the particle level?

By the end of this lesson, you should be able to draw a particle diagram of a solution that shows which particles are present, how they interact with water, and how concentrated the solution is.

Video not loading? Watch it on YouTube.

Particle Diagrams

A particle diagram zooms in from the beaker you can see down to the particles you cannot. A good diagram of a solution shows three things:

  • Which particles: separate ions, or whole molecules
  • How many: the ratio from the formula, and the amount that shows the concentration
  • How they interact: how the solute particles are attracted to the water around them

Ionic Solutes Dissociate

When an ionic compound dissolves in water, its ions separate from each other. This is called dissociation.

NaCl(s) → Na+(aq) + Cl−(aq)

Left box, NaCl(s): sodium and chloride ions packed together in a grid. An arrow labeled add water points to the right box, Na+(aq) + Cl-(aq): the ions are apart, and each one is surrounded by water molecules.

In the solid, each ion touches ions of the opposite charge. In the solution, the ions are spread apart, so never draw them touching in an aqueous solution.

Water Surrounds Each Ion

Water is polar. Its oxygen end is partly negative (δ−), and its hydrogen ends are partly positive (δ+). Each ion attracts the oppositely charged end of the water molecules around it. This is called an ion-dipole attraction.

  • Cations (positive ions): the oxygen ends of water point toward the ion.
  • Anions (negative ions): the hydrogen ends of water point toward the ion.
Left: a sodium ion surrounded by six water molecules, each with its oxygen end facing the ion. Right: a chloride ion surrounded by six water molecules, each with its hydrogen ends facing the ion.

Getting this orientation backward is one of the easiest mistakes to make on a particle diagram. Check it every time: opposite charges face each other.

Molecular Solutes Stay Whole

Molecular substances like sugar and ethanol do not break into ions. Each molecule stays in one piece and spreads out through the water. Show the attractions between molecules as dashed lines, not solid lines, because they are intermolecular forces, not bonds.

Sugar dissolved in water: three whole green sugar molecules spread among water molecules, with dashed lines showing attractions between each sugar molecule and nearby water molecules.

Mix or Separate?

Substances with similar intermolecular forces mix. Substances with very different intermolecular forces separate into layers.

  • Ethanol and water mix: both make hydrogen bonds, so ethanol molecules fit right in among the water molecules.
  • Hexane and water separate: hexane has only London dispersion forces. Water molecules attract each other much more strongly than they attract hexane, so the two form layers.
Left box: ethanol and water molecules evenly mixed, because both make hydrogen bonds. Right box: hexane molecules form a layer on top of a water layer, because hexane has only London forces.

Showing Concentration

In a particle diagram, concentration is shown by how many solute particles are in the same volume. If two boxes are the same size, the box with more solute particles has the higher molarity.

  • If each particle stands for a certain number of moles, count the particles to find moles.
  • Then divide by the volume the box stands for: M = moles ÷ liters.

Draw the Correct Ion Ratio

The formula tells you how many of each ion to draw. Each formula unit of CaCl2 gives one Ca2+ ion and two Cl− ions.

CaCl2(s) → Ca2+(aq) + 2 Cl−(aq)

A box of CaCl2(aq) with 3 calcium ions and 6 chloride ions spread apart, two Cl- ions for every Ca2+ ion. Water molecules are not shown.

The charges in the box must add up to zero. Three Ca2+ ions give +6, and six Cl− ions give −6.

Drawing Checklist

  1. Particles: ions apart, molecules whole.
  2. Ratio: match the formula, so the charges add up to zero.
  3. Amount: more particles in the same volume means more concentrated.
  4. Orientation: the oppositely charged end of each water molecule faces the ion.

↑ Back to top


Worked Examples

Try each problem on your own first, then open the solution to check your work.

Example 1: Choosing the Right Diagram

Which diagram best represents KBr dissolved in water, KBr(aq)?

Three particle diagrams of KBr(aq). Diagram A: K+ and Br- ions stuck together in pairs among water. Diagram B: ions apart, but water hydrogens face K+ and water oxygens face Br-. Diagram C: ions apart, with water oxygens facing K+ and water hydrogens facing Br-.
Show the solution
  1. Diagram A: the K+ and Br− ions are still stuck together in pairs. KBr is ionic, so its ions separate in water. A is wrong.
  2. Diagram B: the ions are apart, but the water is backward. The δ+ hydrogen ends face K+, and the δ− oxygen ends face Br−. Like charges repel, so B is wrong.
  3. Diagram C: the ions are apart, the oxygen ends face K+, and the hydrogen ends face Br−. Opposite charges face each other.
  4. Answer: Diagram C

Example 2: Counting Ions

A particle diagram of 0.25 M Na2SO4 shows 4 sulfate ions, SO42−. (a) How many Na+ ions should be drawn in the same box? (b) What is [Na+]?

Show the solution
  1. Dissociation: Na2SO4 → 2 Na+ + SO42−, so there are 2 Na+ ions for every SO42− ion.
  2. (a) Ion count: 4 SO42− × 2 = 8 Na+ ions
  3. Charge check: 8(+1) + 4(−2) = 0
  4. (b) Concentration: [Na+] = 2 × 0.25 M = 0.50 M
  5. Answer: (a) 8 Na+ ions (b) [Na+] = 0.50 M

Example 3: Molarity from a Diagram

A particle diagram shows 6 solute particles in a box that stands for 0.20 L of solution. Each particle represents 0.010 mol of solute. What is the molarity of the solution?

Show the solution
  1. Count to moles: 6 particles × 0.010 mol per particle = 0.060 mol of solute
  2. Substitute: M = 0.060 mol ÷ 0.20 L = 0.30 M
  3. Answer: M = 0.30 M (2 significant figures)

Example 4: Dilution in a Diagram

A box of 0.60 M glucose solution shows 8 glucose molecules. Water is added until the solution is twice its original volume. (a) How many glucose molecules belong in a box of the same size? (b) What is the new molarity?

Show the solution
  1. What changes: adding water does not change the number of glucose molecules. It spreads the same molecules through more volume.
  2. (a) Same-size box: twice the volume means each box holds half as many molecules: 8 ÷ 2 = 4 molecules. Glucose is molecular, so each one stays whole.
  3. (b) Dilution: M1V1 = M2V2, so M2 = (0.60 M)(V) ÷ (2V) = 0.30 M
  4. Answer: (a) 4 glucose molecules (b) 0.30 M

↑ Back to top


Practice

Practice with instant feedback

Answer original AP-style questions for Unit 3 and see an explanation right after each one. Choose Topic 3.8 or mix topics. No login needed.

↑ Back to top


Lesson Slides

↑ Back to top


Big Ideas

  • Ionic solutes dissociate into separate ions. Molecular solutes stay whole.
  • Water’s oxygen end faces cations, and its hydrogen ends face anions.
  • The number of each ion must match the formula, and the charges must add up to zero.
  • More solute particles in the same volume means a higher molarity.

Exam tip: colligative properties, and calculations with molality or percent by mass or volume, are not tested on the AP exam. Focus on drawing the right particles, ratios, and interactions.

Back to the essential question: to draw a solution at the particle level, show ions apart and molecules whole, use the ratio from the formula, show concentration with the number of particles, and turn each water molecule so its oppositely charged end faces the ion. Next up, Topic 3.9 uses intermolecular forces to separate solutions and mixtures.

↑ Back to top


AP Alignment

This lesson covers Topic 3.8, Representations of Solutions, in Unit 3 (Properties of Substances and Mixtures) of the College Board AP Chemistry Course and Exam Description (CED). Learning objective:

  • 3.8.A: Using particulate models for mixtures: (i) represent interactions between components, and (ii) represent concentrations of components.

Essential knowledge: 3.8.A.1

Suggested skill: 3.C Representing Data and Phenomena. Represent visually the relationship between the structures and interactions across multiple levels or scales (e.g., particulate to macroscopic).

↑ Back to top